• Title/Summary/Keyword: Downlink System

Search Result 425, Processing Time 0.029 seconds

Proportional-Fair Downlink Resource Allocation in OFDMA-Based Relay Networks

  • Liu, Chang;Qin, Xiaowei;Zhang, Sihai;Zhou, Wuyang
    • Journal of Communications and Networks
    • /
    • v.13 no.6
    • /
    • pp.633-638
    • /
    • 2011
  • In this paper, we consider resource allocation with proportional fairness in the downlink orthogonal frequency division multiple access relay networks, in which relay nodes operate in decode-and-forward mode. A joint optimization problem is formulated for relay selection, subcarrier assignment and power allocation. Since the formulated primal problem is nondeterministic polynomial time-complete, we make continuous relaxation and solve the dual problem by Lagrangian dual decomposition method. A near-optimal solution is obtained using Karush-Kuhn-Tucker conditions. Simulation results show that the proposed algorithm provides superior system throughput and much better fairness among users comparing with a heuristic algorithm.

Adaptive Satellite Downlink transmission using Multicarrier CDMA (다중반송파 CDMA를 사용한 적응형 위성 하향링크 전송)

  • Lim Kwang jae;Kim Soo young;Lee Ho Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.10A
    • /
    • pp.1167-1176
    • /
    • 2004
  • This paper presents an adaptive MC-CDMA transmission for downlink in mobile satellite system and simulation results on Ka-band mobile satellite channel. The simulation results show that the proposed scheme support a throughput of several tens of Mbit/s and a spectral efficiency range of 1 bit/s/Hz to 4.7 bit/s/Hz according to channel environments due to the adaptive broadband satellite transmission.

Power Control in Uplink and Downlink CDMA Systems with Multiple Flow Types

  • Li Yun;Ephremides Anthony
    • Journal of Communications and Networks
    • /
    • v.8 no.3
    • /
    • pp.313-322
    • /
    • 2006
  • We consider a power controlled code division multiple access (CDMA) system with multiple flow types. At each of the N nodes, there are F flow types with different signal-to-interference-and-noise-ratio (SINR) requirements. To keep the complexity of the transmitter low, we assume that each node uses the same power level for all its flows. The single flow case has been fully solved and is well-understood. We concentrate on the multiple flow case, and use a novel and different approach. For the uplink problem with N = 2 and F arbitrary, the necessary and sufficient conditions to have a solution are found and proved. For the general N > 1 uplink problem, we provide a necessary condition for the problem to have a solution and an iterative algorithm to find the optimum solution. For the downlink case with F > 1 some properties of the optimal sequences are obtained.

Bidirectional Link Resource Allocation Strategy in GFDM-based Multiuser SWIPT Systems

  • Xu, Xiaorong;Sun, Minghang;Zhu, Wei-Ping;Feng, Wei;Yao, Yingbiao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.16 no.1
    • /
    • pp.319-333
    • /
    • 2022
  • In order to enhance system energy efficiency, bidirectional link resource allocation strategy in GFDM-based multiuser SWIPT systems is proposed. In the downlink channel, each SWIPT user applies power splitting (PS) receiver structure in information decoding (ID) and non-linear energy harvesting (EH). In the uplink channel, information transmission power is originated from the harvested energy. An optimization problem is constructed to maximize weighted sum ID achievable rates in the downlink and uplink channels via bidirectional link power allocation as well as subcarriers and subsymbols scheduling. To solve this non-convex optimization problem, Lagrange duality method, sub-gradient-based method and greedy algorithm are adopted respectively. Simulation results show that the proposed strategy is superior to the fixed subcarrier scheme regardless of the weighting coefficients. It is superior to the heuristic algorithm in larger weighting coefficients scenario.

Novel Pilot-Assisted Channel Estimation Techniques for 3GPP LTE Downlink with Performance-Complexity Evaluation

  • Qin, Yang;Hui, Bing;Chang, Kyung-Hi
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.7A
    • /
    • pp.623-631
    • /
    • 2010
  • In this paper, various of pilot-assisted channel estimation techniques for 3GPP LTE downlink are tested under multipath Rayleigh fading channel. At first, the conventional channel estimation techniques are applied with linear zero-forcing (ZF) equalizer, such as one dimensional least square (1-D LS) linear interpolation, two dimensional (2-D) wiener filter, the time and frequency dimension separate wiener filter and maximum likelihood estimator (MLE). Considering the practical implementation, we proposed two channel estimation techniques by combining time-dimension wiener filter and MLE in two manners, which showed a good tradeoff between system performance and complexity when comparing with conventional techniques. The nonlinear decision feedback equalizer (DFE) which can show a better performance than linear ZF equalizer is also implemented for mitigating inter-carrier interference (ICI) in our system. The complexity of these algorithms are calculated in terms of the number of complex multiplications (CMs) and the performances are evaluated by showing the bit error rate (BER).

Power Loss Analysis of Block Tomlinson-Harashima Precoder for Multi-user MIMO Systems (다중 사용자 다중 입출력 시스템을 위한 Block Tomlinson-Harashima 전처리 기법의 전력 손실 분석)

  • Kim, Joon-Doo;Lee, Chung-Yong
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.49 no.8
    • /
    • pp.12-18
    • /
    • 2012
  • In this paper, we propose an improved analysis of transmission power of BTHP applied into the downlink multi-user (MU) multi-input multi-output (MIMO) system. On the contrary to the conventional analysis that adopts the strong interference assumption for every users in the system, the proposed analysis approximates the characteristics of the actual interference components so that provides more accurate approximation of the transmission power than that from the conventional analysis. By computer simulations, it is observed that the proposed approximation is more accurate than the conventional one, especially in the case of 4-QAM modulation.

Distributed Space-Time Coded Transmission for Mobile Satellite Communication Using Ancillary Terrestrial Component (ATC를 사용하는 이동위성통신을 위한 분산된 시공간 부호화 전송 방법)

  • Kim, Hui-Uk;Gang, Gun-Seok;An, Do-Seop
    • Journal of Satellite, Information and Communications
    • /
    • v.2 no.1
    • /
    • pp.27-34
    • /
    • 2007
  • A mobile satellite broadcasting service including an ancillary terrestrial component (ATC) takes advantage of the satellite's inherent capability to provide broadcast service over global coverage. We consider the downlink transmission concept using ATC with space=time code (STC) for the mobile satellite communication. We do not regard ATC as simply a repeater but consider it as an antenna for STC. First transmission scenarios for an application of STC are represented. Next, we apply STC in the mobile satellite system including ATC and compare the system performance in the proposed architecture of ATC to that in the conventional structure. The simulation results are compared to the conventional downlink transmission concept for the mobile satellite broadcasting service.

  • PDF

Wireless Packet Scheduling Algorithm for OFDMA System Based on Time-Utility and Channel State

  • Ryu, Seung-Wan;Ryu, Byung-Han;Seo, Hyun-Hwa;Shin, Mu-Yong;Park, Sei-Kwon
    • ETRI Journal
    • /
    • v.27 no.6
    • /
    • pp.777-787
    • /
    • 2005
  • In this paper, we propose an urgency- and efficiency-based wireless packet scheduling (UEPS) algorithm that is able to schedule real-time (RT) and non-real-time (NRT) traffics at the same time while supporting multiple users simultaneously at any given scheduling time instant. The UEPS algorithm is designed to support wireless downlink packet scheduling in an orthogonal frequency division multiple access (OFDMA) system, which is a strong candidate as a wireless access method for the next generation of wireless communications. The UEPS algorithm uses the time-utility function as a scheduling urgency factor and the relative status of the current channel to the average channel status as an efficiency indicator of radio resource usage. The design goal of the UEPS algorithm is to maximize throughput of NRT traffics while satisfying quality-of-service (QoS) requirements of RT traffics. The simulation study shows that the UEPS algorithm is able to give better throughput performance than existing wireless packet scheduling algorithms such as proportional fair (PF) and modified-largest weighted delay first (M-LWDF), while satisfying the QoS requirements of RT traffics such as average delay and packet loss rate under various traffic loads.

  • PDF

Definition and Generation of Level 0 Product for KOMPSAT-2

  • Shin, Ji-Hyeon;Kim, Moon-Gyu;Park, Sung-Og
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.810-814
    • /
    • 2002
  • According to the image level definition for KOMPSAT-2 in KOMPSAT-2 Ground Station Specification, the level 0 is frame formatted, unprocessed data at full resolution; any and all communications artifacts (e.g., synchronization frames, communications headers) removed. The level 0 is used for two purposes: 1) exchange of imagery between image receiving & processing element (IRPE), and 2) image transfer from the Receiving & Archiving Subsystem to Search & Processing Subsystem. On-board processing of imagery data of KOMPSAT-2 includes JPEG-like compression and encryption besides conventional CCSDS packetization. The encryption is used to secure imagery data from any intervention during downlink and compression allows real-time downlink of image data reducing data rate produced from the camera. While developing ground receiving system for KOMPSAT-2, it was necessarily to define level 0 products. In this paper, we will suggest level 0 product definition for KOMPSAT-2 and explain reasons of the decisions made. The key factor used while defining the level 0 products is the efficiency of whole ground receiving system. The latter half of the paper will explain the implementation of software that generates level 0 products. The necessary steps to produce level 0 products will be explained, and the performance achieved will be presented.

  • PDF