• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.344-353
• /
• 2012

In this paper, we propose a super-resolution algorithm using discrete wavelet transform. In general super-resolution algorithms for single-image, probability based operations have been used for searching high-frequency components. Consequently, the complexity of the algorithm causes the increase of processing time. In the proposed algorithm, we use discrete wavelet transform to find high-frequency sub-bands. We perform inverse discrete wavelet transform using input image and high-frequency sub-bands of the same resolution as the input image which are obtained by performing discrete wavelet transform without down-sampling and then we obtain image with high-resolution. In the proposed algorithm, we use the down-sampled version of the original image ($512{\times}512$) as a test image ($256{\times}256$) to compare the performance of algorithms. Through experimental results, we confirm the improved efficiency of the proposed algorithm comparing with conventional interpolation algorithms and also decreased processing time comparing the probability based operations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.53-61
• /
• 2010

In this paper, we present a color interpolation algorithm that uses novel edge direction estimator and region classifier. The proposed edge direction estimator accurately determines the edge direction based on the correlation between the images obtained by the channel separated and down-sampled Bayer color filter array(CFA) pattern. The correlation is defined based on the similarity between the edge direction in the local region of the image and the shifting direction of the images. Also, the region of an image is defined as the flat, the edge, and the pattern-edge regions, where the edges are appeared repeatedly. When all the pixels in the image are classified into the three different regions, each pixel is interpolated horizontally or vertically according to the estimated direction. Experimental results show that the proposed algorithm outperforms the conventional edge-directed methods on objective and subjective criteria.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8C
• /
• pp.806-815
• /
• 2006

It is studied to design a low pass filter of the SRC(sample rate converter), which is used to change the sampling rate of digital signals such as in digital modulation and demodulation systems. The larger the conversion ratio of the sample rate becomes, the more signal processing is needed for the filter, which corresponds to the more complexity in circuit realization. Thus it is important to reduce the amount of signal processing for the case of high conversion ratio. In this paper it is presented a design method of a two-stage cascaded FIR filter, which proved to have reduced amount of signal processing in comparison with a conventional single-stage one. The reduction effect of signal processing turned out to be more noticeable for larger value of conversion ratio, for instance, giving down to 72% in complexity for the conversion ratio of 32. It has been shown that the reduction effect is dependent to specific combination of conversion ratios of the cascaded filters. So an exhaustive search has been performed in order to obtain the optimal combination for various values of the total conversion ratio. In this paper every filter is considered to be implemented in the form of a polyphase FIR filter, and its coefficients are determined by use of the Parks-McCllelan algorithm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.162-173
• /
• 2008

In this paper, we propose an effective stereo-view video coding method that considers stereo-view and displayer characteristics. Current many stereo video displayers are designed for not only stereo display but also conventional single view display. In these systems, the resolution of two input videos for a stereo mode is half of that of single view for compatibility with conventional single view video services. In this raper, we propose a stereo video codec to deal with both single view and stereo view services by encoding whole left image and down-sampled right image. However, direct disparity estimation is not possible between two views because the resolution of a left image is different from that of the corresponding right image. So, we propose a disparity estimation method to make use of full information of the left reference image without down-sampling. In experimental result, we achieved $0.5{\sim}0.8\;dB$ coding gain, compared with several conventional algorithms.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1126-1126
• /
• 2001

The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.168-174
• /
• 1992

This study was carried out to find out the distribution of soil components and their relationships in layer of soil profiles under upland condition. Concentrations of nitrate, chloride, and that sort of thing in soil profiles were tested in a field covering $235m^2$ by core sampling down to 150cm depth. Total nitrogen contents in soil profiles progressively decreased in lower depths down to 150cm. Nitrate concentrations in deeper layers than 110cm, which revealed a similar distribution pattern with total nitrogen down to 110cm, increased with the depth lowering to 150cm, indicationg that nitrate has leached to deep layer. Natural abundance of $^{15}N$ in total nitrogen and nitrate in all the soil profiles showed higher values compared with the other general cultivated soils and trended to get higher in deeper layers. The horizontal variation of $^{15}N$ distribution in the field surveyed was not significant. Chloride concentrations and EC values in soil profiles increased with depth where nitrate was accmulated, and showed a highly positive correlation between them.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3791-3805
• /
• 2016

The visual attention mechanism includes 2 attention models, the bottom-up (B-U) and the top-down (T-D), the physiology of which have not yet been accurately described. In this paper, the visual attention mechanism is regarded as a Bayesian fusion process, and a visual attention model based on particle filter is proposed. Under certain particular assumed conditions, a calculation formula of Bayesian posterior probability is deduced. The visual attention fusion process based on the particle filter is realized through importance sampling, particle weight updating, and resampling, and visual attention is finally determined by the particle distribution state. The test results of multigroup images show that the calculation result of this model has better subjective and objective effects than that of other models.

• Journal of Environmental Health Sciences
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2005

The atmospheric transportation and dispersion processes of air pollutants are important issues in dealing with air pollution problems. Air pollutants originated from biological and anthropogenic activities are not only limited to the local emission sources, but could also be transported and dispersed to other regions by synoptic weather systems. Besides, the complexity of topography of central Taiwan helps accumulating air pollutants to promote high-concentration episodes. The techniques of tethersonding were applied to monitor the vertical profiles of winds, air temperatures and humidity, as well as to collect air samples, to be analyzed for pollutants $(O_3,\;NO_2,\;NO\;and\; NMHC)$ from the ground up to 1000m. A time period of about one week, 19-26 October 2002, was chosen as the sampling period due to the high frequency of episode occurrence in autumn based on the past records. Associating with the analysis of weather patterns, the atmospheric characteristics over high-concentration areas can be resolved in more detail. The result of the tethersonding studies showed that weak northerly sea breeze (with thickness about 300m) with low wind speed (about 1 to 2 m/sec) could help develop high ozone concentrations in the down-wind areas. It is also important to have a built-up aloft of precursors and ozone to develop high concentration on the previous day.