• 제목/요약/키워드: Down Cut

검색결과 518건 처리시간 0.03초

금오산(金烏山)의 산화지(山火地)에서 벌목지(伐木地)와 비벌목지(非伐木地)의 식물(植物) 군집구조(群集構造) 비교(比較) (Comparison of Plant Community Structures in Cut and Uncut Areas at Burned Area of Mt. Gumo-san)

  • 제상훈;김원
    • 한국산림과학회지
    • /
    • 제86권4호
    • /
    • pp.509-520
    • /
    • 1997
  • 1994년 4월에 산불이 일어나서, 소나무림과 임상식생이 완전히 전소된 경북 김천시 부상면 금오산(976m)의 일부 지점으로 사면방위가 S10W로, 산불이 발생한 지역을 벌목지와 비벌목지로 구분, 인접한 소나무림을 대조구로 선정하여, 산불이 일어난 후 1년째인 1995년 4월부터 1996년 10월에 걸쳐 식생구조, 종다양성지수, 우점도지수, 균등성지수, 천이도 및 토양의 이화학적 변화를 분석한 결과는 다음과 같다. 조사지에 출현한 식물은 벌목지가 32종, 비벌목지가 36종, 비산화자가 34종으로 나타났으며, 출현된 식물의 생활형은 벌목지 $H(G)-D_1-R_5-e$ 비벌목지가 $H(M)-D_1-R_5-e$, 비산화지가 $M(N)-D_1-R_5-e$ 형으로 나타났다. 적산우점도는 산화지, 비산화지의 출현한 식물의 층상구조로 볼 때, 산화지 중 벌목지는 초본층만 출현하여, 억새(100.00), 산거울(52.27), 졸참나무(51.19), 큰까치수영(39.40)순이었고, 비벌목지의 교목층은 상수리나무(56.91), 소나무(26.83), 관목층은 졸참나무(50.43), 감태나무(40.51), 싸리(37.85), 초본층은 억새(72.27), 고사리(69.02), 산거울(63.63)순이고, 비산화지의 경우 교목층은 소나무(99.88), 감태나무(21.07), 관목층은 졸참나무(77.47), 소나무(60.03), 청미래덩굴(56.19), 초본층은 억새(82.74), 산거울(74.02), 졸참나무(49.43)순으로 나다났다. 종다양성지수는 벌목지 1.05, 비벌목지 1.32, 비산화지 0.22, 균등성지수는 벌목지 0.70, 비벌목지 0.85, 비산화시 0.63이며, 우점도지수는 벌목지 0.15, 비벌목지 0.06, 비산화지 0.96, 천이도는 벌목지 345.19, 비벌목지 747.47, 비산화지 674.34, 각 지소별 유사도지수는 벌목지와 비벌목지간 0.66, 비산화지와 벌목지간은 0.50, 비산화지와 비벌목지간은 0.61이었다. 토양성분은 pH, 치환성양이온인 $Ca^{2+}$, $Mg^{2+}$, $Na^{2+}$, $NH{_4}^+$-N, $NO{_3}^-$-N은 벌목지가 비벌목지 보다 높게 나타냈으며, 유기물함량, 유효인산, 총질소함량, 총탄소함량, 치환성양이온인 $K^+$는 비벌목지가 벌목지보다 높게 나타났다. 이상의 결과로 보아 산화지의 관리에 있어서 무조건 벌목보다는 산화지의 식생회복과 재생의 정도를 고려한 선택적인 벌목이 이루어져야 된다고 생각된다.

  • PDF

다이아몬드의 유통구조와 국내감정 현황에 관한 연구 (The Rationalization of Distribution Structure in Diamond Market and Study on Diamond Grading System In Korea)

  • 이상기
    • 유통과학연구
    • /
    • 제14권4호
    • /
    • pp.103-110
    • /
    • 2016
  • Purpose - This study investigates the improvement of rationalization of distribution structure in Korean diamond market. It also explores the international distribution of diamond and how the distribution of Korean diamond market system was improved. This study also for providing the evaluation method in case of purchasing diamond on the consumers. Research Design, Data, and Methodology - The research investigates how international diamond distribution market has been changed since 1933 by De Beers. The international Diamond rough stone has been deregulated in supply and demand by Debeers since July, 2000, therefore, the price maintenance policy of diamond market also has been changed. In the short term, the diamond price in market has been down, whereas, in the long term, the market share of Debeers has affected the high quality of diamond price in world market. Before 1985, both G color and VVS1 clarity were used as the level of percentages in the diamond certificate of authenticity in Korea. But, after 1985, the diamond certificate of authenticity uses Diamond Grading Report. Results - Between the 1970's and 1980's, Debeers had controlled about 80 percentages of international diamond supply market. But, Debeers share in diamond market fell by 60 percentages in 2000's. Debeers supplied 31%(4390 carets) of international diamond supply and 41%(39 billion dollars) in 2003. However, Debeers shares 50% of market shares in the diamond supply market by Alosa in Russia. In Korea, the diamond grading report system has been used since 1985. But, the diamond grading report system has price bubbles and much irrational parts in grading system methods. Conclusions - 4C, the grading system of diamond, is a method for comparing and evaluating diamond objectively. Diamond is graded according to its color, cut, clarity, and carat. The price of diamond is determined based on its each item. Consumers purchase diamond for the purpose of investment and wearing. In terms of investment, it is recommended to purchase diamond with color of D grade, cut with Excellent or Very Good Cut grade, Clarity of FL or IF, and more than 3 carat. As for wearing purpose, it is highly recommended for diamond to have color of F or G grade, cut of Excellent or Very Good Cut, clarity of VS2 or SI1, and more than 1 carat Before 2000, Central Selling Organization(CSO) distributed about 80 percentages rough diamond to world market exclusively by purchase, classification, assessment, and sales. After 2000, Dbeers diamond company looses slowly market shares, while Almosa diamond company etc. in Russia are taking over world market shares more and more. Debeers market shares have been falling over the years, and the international diamond markets are gradually growing by other international diamond companies. But, there is no change in Korean diamond market after 1980's. Korean diamond distribution needs to follow international level of Diamond Grading System. By using different grading systems with different panel members, Korean diamond grading system needs to follow international perfect grading systems to grow diamond markets and maintain within top 10 diamond markets countries.

조선시대 전통 화훼장식의 디자인 형태 분석에 관한 연구 - 표현기법을 중심으로 - (A Study on Design Analysis of Traditional Flower Design in the Joseon Dynasty Period: Focused on Expression Technique)

  • 이경숙;오욱
    • 한국화예디자인학연구
    • /
    • 제45호
    • /
    • pp.13-29
    • /
    • 2021
  • 우리나라 전통 화훼장식의 기술 체계는 과거로부터 현대로 그 맥이 이어졌을 것이라는 인식 아래, 이 연구에서는 조선시대 화훼장식에서 디자인 형태의 유형을 추출하여 표현기법을 분석하고 현대의 전통 화훼장식과의 연관성을 규명하고자 하였다. 그 결과, 조선시대화훼장식 작품들은 대부분 중앙 출발점에 1개 초점(1점 출발)을 주로 표현하였다. 중심가지선은 주로 1개 사용하였고, 밑받침 소재로는 주로 절엽을 사용하였다. 현대 화훼장식에서도 1개의 중앙 출발점, 잎 소재의 밑받침이 주로 사용되고 있어 조선시대와 흡사하다. 표현기법별 사용 빈도를 보면, 줄기를 그대로 노출시킨 줄기 노출 기법의 빈도가 가장 많았고, 모든 기법에서 절화와 절지가 비슷한 빈도로 사용되었다. 사용된 식물성 소재로는 꽃을 이용하는 절화와 선의 표현할 수 있는 절지가 주로 사용되었다. 그 외에 깃털, 부채, 붓 등의 비식물성 소재도 장식에 이용되었다. 결론적으로, 우리나라 전통 화훼장식은 표현기법 측면에서 이미 조선시대에 체계적으로 정립되어 높은 수준의 화훼장식품이 제작되었다는 것을 알 수 있다. 향후 우리 화훼장식의 역사를 좀 더 다양한 방법으로 연구하고 역사적 전통을 살려가면서 현대의 화훼장식을 발전시켜 나가는 노력이 필요할 것이다.

Cryogenic Thermal Cycling Test on IGRINS cross-disperser VPH Grating

  • 정현주;임주희;이성호;;박수종;육인수
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.156-156
    • /
    • 2011
  • VPH (Volume Phase Hologram) grating is one of the transmission gratings and is known as its remarkable efficiency (>90%). It has two different densities of gelatins causing interference patterns. The VPH grating is favored in many astronomical instruments these days and also IGRINS, which is up coming near infrared high-resolution spectroscope expected to see the first light next year, uses the VPH grating as its cross-disperser. The infrared astronomical instruments operate at cryogenic temperature (~100K) in order to cut down thermal noise and the optical components of IGIRNS will be operated at 130K. The VPH grating is sandwiched in between fused silica or glass and glued together using optical adhesive. IGRINS is expected to go through 50 times of thermal cycling in 10 years including the performance test and this research is to check whether the physical characteristic such as the adhesion or dichromatic gelatin does not break and change from the several cryogenic thermal cycling. The two identical test gratings provided from Kaiser Optical System, Inc. are used in this test. One VPH grating is cooled down to 100K for 2 hours with maximum dT/dt = 5 and warmed up to the room temperature and another grating is kept stored in the room temperature and used as a control sample. In order to check the change, we inspected the grating with eyes and checked its efficiency and transmission at the room temperature every 10 cycling. From the 40 times of cryogenic temperature cool down cycling, the VPH grating showed no signs of change within the error compared to the control sample. We concluded the VPH grating is durable through several cryogenic thermal cycling.

  • PDF

수치해석을 이용한 원지반 부착식 판넬옹벽의 투수성 평가 (Evaluation of Drainage Capacity of Precast Concrete-panel Retaining Wall Attached to In-situ Ground Using Numerical Analysis)

  • 권용규;이재원;황영철;반호기;이민재
    • 한국지반공학회논문집
    • /
    • 제37권3호
    • /
    • pp.43-50
    • /
    • 2021
  • 우리나라는 산지가 많은 지형적인 특성으로 도로와 도시 개발에 따라 산지를 굴착하고 옹벽을 설치하는 공사가 매년 증가하고 있다. 특히 Panel식 옹벽은 안정성이 높기 때문에 사용빈도가 높으며, 일반적으로 Bottom-up방식을 사용하고 있다. 하지만 옹벽을 설치하기 위해 1:0.3정도의 기울기로 굴착 후 옹벽을 시공하는 방식인데 이러한 방식은 경사굴착으로 인해 추가 토공처리가 필요하며, 되메움과 다짐불량에 의한 안정성 저하 등의 문제점을 지니고 있다. Top-down방식의 경우 이러한 문제점을 보완할 수 있다. 하지만 Panel을 사면에 부착시키기 위해 사용되는 모르타르로 인해 옹벽과 사면 사이에 불투수층이 생긴다. 따라서 본 연구에서는 가상의 사면에 불투수층을 고려하여 배수시스템들의 역할이 우기시 사면의 안정성에 미치는 영향에 대하여 비교 분석하였다.

초고층 주상복합 프리캐스트 콘크리트 구조물의 경제성 분석에 관한 연구 (A study on the economic analysis of high-rise residential-commercial building that is made by precast concrete)

  • 김범기;석성준;이웅균;안성훈;강경인
    • 한국건축시공학회지
    • /
    • 제5권1호
    • /
    • pp.89-96
    • /
    • 2005
  • The increase of hish-rise residential-commercial buildings is required to cut down a term of works and the cost of construction. Reinforced concrete structures and steel framed reinforcement concrete that are commonly used have the difficulty in reducing them. Therefore, the purpose of this study is to propose a new precast concrete complex system and to analyze its economical feasibility. The economic analysis is performed through comparing the cost of a high-rise reinforced building that was already constructed with that of the new proposed precast concrete system, which is limited to structural frame work of typical floors. This study shows that the proposed precast concrete complex system is economical. Further research should be directed at including the influence of a term of works.

지선구간의 선로전환기 및 건널목 무선제어 운영절차 연구 (A Study on the Radio-Based Operation Procedures of Switch and Crossing at Branch Line)

  • 김영훈;최원석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.1269-1274
    • /
    • 2011
  • To cut down the maintenance expenses at branch lines, the foreign developed countries have developed the low-cost signalling on low-density lines. These examples are FFB(FunkFahrBetrieb) Radio based train operation by German railways(Deutsche Bahn AG), ERTMS REGIONAL by Europe and LOCOPROL system using a GPS. Also, Korea is developing Information and Communication Technology based low-cost signalling on low-density lines. The characteristics of this system are directly controled switch and crossing by driver. For the purpose of this paper, we reviewed the business process for switch and crossing control. Specially, we compared and analysed both methods whether the driver takes control over the operation procedures of switch or the control message is carried by the command of the controller. And by utilizing the instrument of UML, I planned the switch according to the control authority and the operation procedures needed for the control of crossing.

  • PDF

전통 벽체 기법 변화에 관한 연구 (A Study on Changes of Traditional Wall Technique)

  • 조영민
    • 건축역사연구
    • /
    • 제23권4호
    • /
    • pp.47-56
    • /
    • 2014
  • Traditional wall is ground coat, twice plater, last plaster by such a process has made a wide variety of used materials and techniques are accordingly diverse. These traditional techniques handed down the traditional walls of the techniques, rather than coming to the lowered cut off at any moment from now when the technique is used, not knowing whether to be used. Repair and restore cultural property maintenance work, it is not only the outward form hiding inside it is a technique to keep the preservation of cultural assets can be called true. When viewed from the side walls of these conventional techniques to reveal changes in the traditional process by looking at the changes in technology with traditional techniques for cause shall be made in stock. This paper is from the late Joseon Japanese occupation of techniques ranging from traditional wall to reveal the change process to its current significance of cultural property repair method to be helped.

철도시설물 유지보수 외주화에 따른 직영 및 외주직원간 안전의식 분석 및 개선에 관한 연구 (A Study on the Safety Consciousness between Permanent and Temporary Workers and the Improvement of Safety Management System about Railroad Facilities Maintenance's Outsourcing Operation)

  • 박성민;이원영
    • 한국안전학회지
    • /
    • 제28권6호
    • /
    • pp.79-83
    • /
    • 2013
  • The advent of private railroad corporations presented many problems on administration's effectiveness. These brought an effect on safety management too. Most public railroad corporations maintain their rolling stocks and facilities by their own workers. On the other hand, private railroad corporations depend on outsourcing to cut down the cost of maintenance. But they have similar safety management systems. Therefore we investigated the gap between the two types of corporations, focusing on workers' safety attitude and proposed solutions to improve safety management systems in private railroad corporations.

레이저 슬릿빔과 CCD 카메라를 이용한 3차원 영상인식 (3D image processing using laser slit beam and CCD camera)

  • 김동기;윤광의;강이석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.40-43
    • /
    • 1997
  • This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

  • PDF