• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권2호
• /
• pp.217-221
• /
• 2010

다양한 종류의 새로운 모바일 기기의 등장과 이들 기기들의 사용자의 증가에 따라 모바일 P2P 시스템과 관련된 연구가 활발히 진행되고 있다. 본 논문에서는 모바일 환경에서 double-layered 슈퍼 피어 시스템을 위한 새로운 검색 알고리즘을 제안한다. 제안한 검색 알고리즘에서는 전체 실험 영역을 그리드 셀로 분할하며 셀들은 같은 크기를 가지고 있다. 그리드는 모바일 기기의 통신 반경과 피어들의 수를 고려하여 적절히 구성된다. 제안한 검색 알고리즘은 방향 분할 플러딩으로서 검색시 셀들의 검색 방향을 포함하는 방법을 기반으로 한다. 이 방법은 성공적으로 네트워크의 부하를 줄였으나 낮은 검색 성공률을 보여준다. 성공률을 보다 개선하기 위해 슈퍼 피어를 위한 bridge-peer table과 n-way 검색을 활용하였다. 그 실험결과 제안한 알고리즘은 기존의 double-layered 시스템에 비하여 평균 20~30%의 메시지 패킷수가 감소되었음을 보여주었다. 성공률 역시 double-layered 시스템에 비해 약2~5% 개선되었다.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.443-450
• /
• 1998

Layered double hydroxides(LDHs) [{{{{ {Mg }_{1-x } }}{{{{ {Al }_{x } }}({{{{ {OH}_{2 } }})]ζ+({{{{ {CO }`_{3 } ^{2- } ){ }_{x/2 } }}$.${{{{ { yH}_{2 }O }} wioth variation of layer charge densitywere synthesized by co-precipitation methdo since their charge densities have a very important role to be det-ermined the physicochemical properties of layered materials. The XRD IR and thermal studies of them were discussed and the kinetic study for the decarbonation reaction was also carried out. From the results of XRD analysis we found that the lattice parameter and the unit cell volume were linearly decreased with the amount of Al substituents(x) in the vicinity of x=2∼10${\times}$1/3${\times}$10-1 but they had nearly constant values when the x are far from these vicinit. The activation energies for the decarbonation reaction of x=6.8, 10${\times}$1/3${\times}${{{{ { 10}^{-1 } }} were estimated to be 47.0, 37.6, 39.3 kcal/mol The specific surface areas(90-120 m2/g) of stable hy-drotalcite-type LDHs were dractically decreased with increasing of layer charge density.

• Journal of Information Display
• /
• 제13권2호
• /
• pp.61-66
• /
• 2012

The double-layered Ti/Si barrier metal is demonstrated for the source/drain Cu interconnections in oxide semiconductor thin-film transistors (TFTs). The transmission electromicroscopy and ion mass spectroscopy analyses revealed that the double-layered barrier structure suppresses the interfacial reaction and the interdiffusion at the interface after thermal annealing at $350^{\circ}C$. The underlying Si layer was found to be very useful for the etch stopper during wet etching for the Cu/Ti layers. The oxide TFTs with a double-layered Ti/Si barrier metal possess excellent TFT characteristics. It is concluded that the present barrier structure facilitates the back-channel-etch-type TFT process in the mass production line, where the four- or five-mask process is used.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.255-262
• /
• 2004

In this paper, a number of double-layered microwave integrated circuits (MIC) have been designed and analyzed based on a developed finite-difference time-domain (FDTD) solver. The solver was first validated through comparisons of the computed results with those previously published throughout the literature. Subsequently, various double-layered MIC printed on both isotropic and anisotropic substrates and superstrates, which are frequently encountered in printed circuit boards (PCB), have been designed and analyzed. It was found that in addition to protecting circuits, the added superstrate layer can increase freedoms of design and improve circuit performance, and that the FDTD is indeed a robust and versatile tool for multilayer circuit design.

• 약학회지
• /
• 제57권6호
• /
• pp.442-447
• /
• 2013

The aim of the present study was to improve commercial twice-a-day Acebrophylline formulation to once-a-day new formulation to improve patient compliances. To develop the double-layered tablet, the sustained release layer was prepared using Eudragit$^{(R)}$ L100-55 and Carnauba wax. The sustained release layer has shown delayed release rates in pH 1.2 which comparable to that of performed in pH 6.8 buffer. In the comparative pharmacokinetic study with commercialized Surfolase$^{(R)}$, the present double-layered Acebrophylline tablet has shown similar pharmacokinetic parameters of AUC, $C_{max}$ and $T_{max}$ values.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.55-58
• /
• 2006

An experimental study is performed to evaluate the performance and the efficiency by humidifying MEA and by making the double-layered catalyst in a fuel cell system which is taken into account the physical and thermal concept. An electrical output produced by PEMFC(Polymer Exchange Membrane Fuel Cell) is measured to assess the performance of the stack and the efficiency is also evaluated according to the different situation in which is placed with and without the humidification of MEA(Membrane Electrolyte Assembly). Subsequently, It is found that the measured values of MEA voltage and current are influenced by the MEA temperature, humidification, and the double-layered catalyst which gives more enhanced values to apply for electric units.

• 소성∙가공
• /
• 제31권3호
• /
• pp.143-150
• /
• 2022

The purpose of this study was to investigate an innovative hydroforming process for the cost-effective manufacturing of double layered tube with circumferentially corrugated patterns. Conventional double pipe heat exchanger has relatively poor heat transfer efficiency because of the limited contact area resulting from the concentrically arranged simple cylindrical structure. As a promising alternative to enhance heat transfer efficiency, double layered tube with corrugated internal pattern was considered in this study. To fabricate corrugated inner tube, innovative tube hydroforming system was developed. The customized loading paths were established using the simulated forming pressure and contracting stroke at various bar diameters. Experimentally obtained cross-sectional profiles were analyzed to evaluate the reliability and applicability of the hydroformed tube with various patterns. The results demonstrate that the proposed hydroforming process can be a feasible alternative for manufacturing high-performance double-tube heat exchangers.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1291-1298
• /
• 2007

종래의 DGS를 이용한 초고주파 회로의 메탈 패키징(metal packaging)시 존재했던 DGS의 접지면 접촉 문제를 해결하고자, 본 논문에서는 이중 기판 결함 접지 구조 구조를 제안하고, 이를 1:4 비대칭 전력 분배기에 적용한 응용예를 제시한다. 이중 기판에 구현된 사각형 DGS는 종래와 같이 마이크로스트립 선로의 특성 임피던스를 표준형 선로보다 크게 증가시킨다. 이중 기판 DGS 구조를 형성하기 위하여 제2유전체 기판이 DGS가 구현된 기판면의 바닥 접지면에 접합된다. 따라서 제2유전체 기판이 메탈 패키지 바닥면에 장착되므로, DGS가 직접 패키지 접촉되는 것을 막을 수 있다. 초고주파 회로 응용예를 보이기 위해, 이중 기판 DGS를 이용하여 패키지 접지 문제를 해결한 1:4 비대칭 전력 분배기의 설계 및 측정 결과가 제시되는데, 시뮬레이션과 측정 결과에 있어서 잘 일치하는 특성을 보인다.

• 폴리머
• /
• 제29권3호
• /
• pp.260-265
• /
• 2005

약물의 서방화에 있어서 독성이 특히 강하거나 유효 치료영역이 좁은 약물일수록 초기 버스트는 매우 중요하다. 이러한 약물의 전달을 위한 단일층으로 이루어진 나노미립구의 이용은 표면에 존재하는 약물 때문에 초기 버스트가 커서 서방화에 적절치 못하다. 따라서 본 연구에서는 생분해성 고분자인 덱스트란과 락타이드-글리콜라이드 공중합체(PLCA)를 이용한 이중층 나노미립구를 제조하여 서방성 방출 거동을 보이는 약물 전달체 제조에 대한 연구를 수행 하였다. 덱스트란과 PLCA의 나노미립구는 W/O/W법을 이용하여 이중 에멀젼 과정을 통해 제조하였고 계면활성제로는 폴리(비닐 알코올)(PVA)을 사용하였다. 덱스트란의 생체외 방출 거동을 확인하기 위해 동결 건조된 시료를 직경 $3{\times}1mm$ 몰드를 이용하여 웨이퍼를 제조하여 증류수에서 7일간 방출 거동을 확인하였다. 이중층 나노미립구는 각각의 단일고분자로 이루어진 나노미립구에 비해 다른 방출거동을 보였다. 특히 유화제인 PVA농도가 $0.2\%$인 것이 0차 방출에 가까운 결과를 보였다. 본 실험을 통해 대조군인 물리적인 혼합 모델, 덱스트란 또는 PLGA로만 이루어진 웨이퍼 및 단일층 미립구에 비해 이중층 나노미립구의 내부물질인 덱스트란의 방출 거동이 서방형을 보임을 확인할 수 있었으며 PVA의 함량에 따라 방출 거동을 조절할 수 있었다.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.761-768
• /
• 1995

Double layered BaTiO3 thin films with high dielectric constant as well as good insulating property were prepared for the application to low voltage driving thin film electroluminescent (TFEL) device. BaTiO3 thin films were formed by rf-magnetron sputtering technique. Amorphous and polycrystalline BaTiO3 thin films were deposited at the substrate temperatures of room temperature and 55$0^{\circ}C$, respectively. Two kinds of films prepared under these conditions showed high resistivity and high dielectric constant. The figure of merit (=$\varepsilon$r$\times$Eb.d) of polycrystalline BaTiO3 thin film was very high (8.43$\mu$C/$\textrm{cm}^2$). The polycrystalline BaTiO3 showed a substantial amount of leakage current (I), under the high electric field above 0.5 MV/cm. The double layered BaTiO3 thin film, i.e., amorphous BaTiO3 layer coated polycrystalline BaTiO3 thin film, was prepared by the new stacking method and showed very good dielectric and insulating properties. It showed a high dielectric constant fo 95 and leakage current density of 25 nA/$\textrm{cm}^2$ (0.3MV/cm) with the figure of merit of 20$\mu$C/$\textrm{cm}^2$. The leakage current density in the double layered BaTiO3 was much smaller than that in polycrystalline BaTiO3 under the high electric field. The saturated brightness of the devices using double layered BaTiO3 was about 220cd/$m^2$. Threshold voltage of TFEL devices fabricated on double layered BaTiO3 decreased by 50V compared to the EL devices fabricated on amorphous BaTiO3.