• Electrical & Electronic Materials
• /
• v.4 no.2
• /
• pp.159-174
• /
• 1991

이중주입효과에 의한 고내압 반도체 스위칭소자의 설계 제작에 촛점을 맞추어 Injection Gate구조와 MOS Gate 구조로 시료소자를 제작해 그 특성을 검토하고 Electrical Switching 및 Oxide막에서의 Breakdown현상에 의한 문제점을 해결해 보고자 Optical Gate구조를 제안하여 이 optically Gated Semiconductor Switching 소자의 동작특성을 연구하고 Injection Gate 구조를 제안하여 이 optically Gated Semiconductor Switching 소자의 동작특성을 연구하고 Injection Gate 및 MOS Gate 구조(Planar type, V-Groove type, Injection Gate mode, Optical Gate mode)로 설계제작된 소자와 특성을 비교 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.209-214
• /
• 1992

This paper presents a one cycle R&D project regarding the large inertia platform servo control system. The steps followed the rather orthodox procedure. A serial double rate-loop was closed with a position loop, and acceleration velocity anticipatory compensations were designed in the forward path. Some appropriate compensation devices were utilized for the signal processing as well as for the better control quality. Simulations and experimental tests were repeated, and satisfactory performances were observed. However, frequency domain uncertainties inherent to the large structures still remain as an expertise supported subject.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2004

A FinFET, a novel double-gate device structure is capable of scaling well into the nanoelectronics regime. High-performance CMOS FinFETs , fully depleted silicon-on-insulator (FDSOI) devices have been demonstrated down to 15 nm gate length and are relatively simple to fabricate, which can be scaled to gate length below 10 nm. In this paper, some of the key elements of these technologies are described including sub-lithographic pattering technology, raised source/drain for low series resistance, gate work-function engineering for threshold voltage adjustment as well as metal gate technology, channel roughness on carrier mobility, crystal orientation effect, reliability issues, process variation effects, and device scaling limit.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.908-919
• /
• 1998

This paper describes implementation and simulation of Chua's oscillator circuits with a cubic non-linear resistor. The two-terminal nonlinear resistor NR consists of one Op Amp two multipliers and five resistors. The Chua's oscillator circuit is implemented with analog electronic devices. Period-1 limit cycle period-2 limit cycle period-4 limit cycle and spiral attractor double-scroll attractor and 2-2 window are observed experimentally from the laboratory model and simulated by computer for the presented model. Comparing the result of experiments and simulations the spectrums are satisfied.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.127-134
• /
• 2001

With the increasing demands for hand-held devices with lightweight and low-power-consumption displays, the role of reflective liquid crystal displays (LCDs) is becoming more and more important. Especially, the single polarizer mode is considered as a suitable structure for reflective LCDs because it can provide high brightness. However, the single-polarizer LCDs have demerit in that the contrast is lower than double-polarizer LCDs because of the light leakage in thedark state. (omitted)

• 전기의세계
• /
• v.31 no.4
• /
• pp.288-295
• /
• 1982

In this study, the characteristic equation of a double sided short stator linear induction motor, referred to as LIM excited by equivalent current sheet having linear current density was derived using Maxwell's electromagnetic field theory with its entry and exit, end effects taken into consideration. According to the treatment of several physical phenomena in the air-gap i.e. the magnetic flux density distributions, thrust-force, forward and backward travelling wave with decay, normal field, the fundamental data in this study are made reference to improve the characteristics of LIM, effectual electro-magnetic energy conversion devices.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.106-107
• /
• 2003

The interest of THz technology has been growing fast due to the potential of its vast applications. Today´s THz technology pursues semiconductor based miniature electronic devices operating at undeveloped electromagnetic frequency band between 100 GHz and 10 THz. Tremendous research progresses on THz technology have been made for decades. However, it is limited in the power and performance of THz sources and systems for real applications. (omitted)

• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.5-9
• /
• 2012

Novel mechanisms for Energy Recovery Devices are proposed to diminish the pressure loss in the high-pressure reverse-osmosis system. In the beginning, the state-of-the-art in the design of Energy Recovery Devices is reviewed and the features of each model are investigated. The direct-coupled axial piston pump(APP) and axial piston motor(APM) showed 39% energy recovery at operating pressure of reverse osmosis desalination systems, 60 bar. Meanwhile, the developed PM2D model, in which APM pistons are arranged parallel to those of APP, is more compact and showed higher efficiency in a preliminary test. Loss-reduction mechanisms employing rod piston and double raw valve port are additionally proposed to enhance the efficiency and durability of the device.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.396-409
• /
• 2018

Elliptic curve cryptography (ECC) can achieve relatively good security with a smaller key length, making it suitable for Internet of Things (IoT) devices. DNA-based encryption has also been proven to have good security. To develop a more secure and stable cryptography technique, we propose a new hybrid DNA-encoded ECC scheme that provides multilevel security. The DNA sequence is selected, and using a sorting algorithm, a unique set of nucleotide groups is assigned. These are directly converted to binary sequence and then encrypted using the ECC; thus giving double-fold security. Using several examples, this paper shows how this complete method can be realized on IoT devices. To verify the performance, we implement the complete system on the embedded platform of a Raspberry Pi 3 board, and utilize an active sensor data input to calculate the time and energy required for different data vector sizes. Connectivity and resilience analysis prove that DNA-mapped ECC can provide better security compared to ECC alone. The proposed method shows good potential for upcoming IoT technologies that require a smaller but effective security system.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.124-127
• /
• 2005

It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerene$(C_60)$ as electron acceptor(A) with doped charge transport layers, and BCP and $Alq_3$ as an exciton blocking layer(EBL). We have measured the photovoltaic characteristics of the solar cell devices using the Xe lamp as a light source. We were use of $Alq_3$ layer leads to external power conversion efficiency was $2.65\%$ at illumination intensity $100\;mW/cm^2$. Also we confirmed the optimum thickness ratio of the DA hetero-junction is about 1:2.