• Journal of Sensor Science and Technology
• /
• v.33 no.4
• /
• pp.224-229
• /
• 2024

Quantum dot light-emitting diodes (QD-LEDs) are emerging as next-generation displays owing to their high color purity, wide color gamut, and solution processability. Enhancing the efficiency of QD-LEDs involves preventing non-radiative recombination mechanisms, such as Auger and interfacial recombination. Generally, ZnO serves as the electron transport layer, which is known for its higher mobility compared to that of organic semiconductors and can lead to excessive electron injection. Some of the injected electrons pass through the quantum dot emissive layer and undergo non-radiative recombination near or within the organic hole transport layer (HTL), resulting in HTL degradation. Therefore, the implementation of electron blocking layers (EBLs) is essential; however, studies on all-solution-processed inverted InP QD-LEDs are limited. In this study, poly(9-vinylcarbazole) (PVK) is introduced as an EBL to mitigate HTL degradation and enhance the emission efficiency of inverted InP QD-LEDs. Using a single-carrier device, PVK was confirmed to effectively inhibit electron overflow into the HTL, even at extremely low thicknesses. The optimization of the PVK thickness also ensured minimal disruption of the hole-injection properties. Consequently, a 1.5-fold increase in the maximum luminance was achieved in the all-solution-processed inverted InP QD-LEDs with the EBL.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2014

Purpose: This study relates to the development of the prism dot-sight combined with the thermal imaging camera. Methods: We have placed a reflector designed to the doublet type in the front of a BS (beam splitting) prism, have placed an OLED panel and a dot reticle generator to the top and bottom of the reflecting surface of the BS prism, and have placed a detachable magnifier between the BS prism and the observer by which the observer can see the magnified image of the OLED panel. By doing this, we were able to configure the new type prism dot-sight combined with the thermal imaging camera. Results: By placing the removable magnifier designed with a new type between the BS prism and the observer, we could design the new type prism dot-sight which performs the role of the dot sight by removing the magnifier during the day-time, and performs the role of the night scope during the night-time by which we can observe the enlarged image of the thermal imaging camera through the BS prism by attaching the removable magnifier. Conclusions: In this study, we have developed the prism dot-sight combined with the thermal imaging camera which is able to play the role of the day or night scope selectively, by disposing the designed magnifier characterized by the focal length of 44 mm, the viewing angle of ${\pm}7.0^{\circ}$, and the MTF value of 0.5 or more at the criterion of 50 lp/mm and the 0.7 field between the BS prism and the observer. By doing so, we could design and fabricate the new type prism dot-sight combined with the thermal imaging camera which can further increase the rapidity of firing and provide more convenience in the mounting of a firearm than the detachable combination of an existing dot sight and an existing night scope.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.417-417
• /
• 2012

For desired optical properties of QDs, it is very important to reduce the presence of defects on their surfaces. Passivation of surface defects using larger band gap materials is the most effective way. Some groups successfully synthesized Cd based multi-shell structured quantum dots and improved its optical properties. However, its productivity has limit because of the amounts of glass ware and space. In this research, we try to synthesize Cd based multi-shell structured nanocrystal quantum dots to overcome demerits of conventional batch synthetic method. This reactor composed pump, SUS reaction part (3.2 mm stainless steel and furnace) and batch mixer. We successively synthesized CdSe/CdS/ZnS quantum dot at this reactor in one step.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.150-158
• /
• 1996

Physiological observations reported and the perceptual phenomena that some simple arrays of discrete dots are perceived as a continuous curve, and others are perceived as an angular contour or as consisting of separate goups of dots. The perception of continuous curves versus discondinuous angles is mainly determined by the relative orientations of the dots, i.e., by the angles between sucessive virtual lines, whereas the length of the virtual lines gives little influence. It is important that the perception of dot stimuli is presented by vitual lines between dots in visual information processing. In this paper, on the basis of these facts of physiological observations, some experimental results on the perception of visual lines form dot stimuli are shown. Triples of the dots used in the experiment are similar to those of smith & Vos' physiological experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.260-267
• /
• 2015

In the past, we implemented a web-based smart education platform, but this is not efficient in a smart or mobile education environment. Therefore, in this paper, we propose an Android-based e-board smart platform for a smart or mobile education system. Here, we use Anoto digital pen- and dot pattern-based technologies. This Android-based smart education platform is efficient for a smart education environment. Further, we implement the hardware and software parts of the technologies, an Anoto-based trajectory recognition algorithm, and a probabilistic neural network for handwritten digit and hand gesture recognition.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.229-234
• /
• 2007

Diffuse optical tomography (DOT) is a relatively new medical imaging modality which uses near infrared light to image large-sized tissues noninvasively. We constructed a frequency-domain DOT system to measure the optical properties of optical phantoms and human tissues. The FD-DOT uses the intensity-modulated infrared light source that illuminates the biological tissues. The phase shift and modulation changes at each detector site are separately processed to measure the optical properties. The absorption and scattering coefficients are separately estimated using inverse algorithms.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.388-393
• /
• 2004

Creep behavior of Ti had been studied in a stress from 9.8 to 29.4 MPa and temperature rang from 873K to 973K with a special reference to tertiary creep. It was found that stress exponent of Ti was larger than that of the general pure metal and the compound metal. The relationship between true strain and strain rate in tertiary creep was appeared as the equation, $ln{\dot{e}}$ = $ln{\dot{e}}_{0}$ + ${\Omega}$ e Also, Apparent activation energy of was appeared as 274.92kJ/mol by using the equation ${\dot{\varepsilon}}_{0}$ = A ${\sigma }_{0}^{\ast_0}$ exp$(-Q_{0}/RT)$

• The Korean Journal of Mycology
• /
• v.25 no.1 s.80
• /
• pp.6-9
• /
• 1997

Black dot root rot of eggplant was first found in vinyl-housed fields of Yeoju area in Korea in May, 1993. The causal fungus of the disease was identified as Colletotrichum coccodes (Wallr.) Hughes based on the morphological and cultural characteristics. Pathogenicity tests revealed that isolates of the fungus were responsible for the disease.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1594-1596
• /
• 2011

고전압 펄스 성형회로의 출력 펄스를 측정하기위한 D-DOT 프로브를 설계 제작하고 그 동작 특성을 조사하였다. 이 프로브는 고전압 펄스 전송선의 외함에 전계방향과 병렬로 설치되었다. 프로브의 중심도체는 지름 4.6 mm의 구리선이고, 바깥도체는 안지름 15 mm의 알루미늄이며, 이들 도체사이에 동축의 테플론 절연체가 삽입되었다. 프로브에서 출력되는 신호는 고전압 펄스신호의 미분된 형태의 신호가 측정되므로 오실로스코프의 적분기능을 사용하였다. 실제 제작한 프로브의 교정비는 $7.7{\times}10^{12}$였으며, 컴퓨터 시뮬레이션을 통하여 얻은 교정비는 $7.38{\times}10^{12}$였다.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.1
• /
• pp.68-70
• /
• 2012

A sterrhine species, Perixera punctata (Warren) is reported for the first time from Korea. One male and one female were collected from Jeju Island, South Korea. Perixera punctata can be distinguished by the long bipectinate male antennae, the blackish discal dot and a large dark grayish dot on the subcosta of the forewings and a large dark brownish discal dot and blackish undulating postmedial line on the hindwings. In the male genitalia, a long slender valva with two arm-shaped costal processes is a distinguishing character. In the female genitalia, long and medially twisted ductus bursae with a colliculum, and large, ovate corpus bursae with minute dots are distinguishing characters. Diagnosis and description of the species are given with figures of the male and female genitalia.