• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.349-358
• /
• 2004

A low pressure impactor is an impaction device to separate airborne particles into aerodynamic size classes at low pressure condition. We designed a two-stage low-pressure impactor to classify submicron sized environmental aerosols. Performance evaluation was carried out for stages 1 and 2 by using an electrical method. Monodisperse liquid dioctyl sebacate (DOS) particles were generated using evaporation-condensation process followed by electrostatic classification using a DMA (differential mobility analyzer). The test particles were in the range of 0.08∼0.8$\mu\textrm{m}$. For the evaluation of the impactor we used two electrometers; one was connected to the impaction plate of the impactor and the other was to the Faraday cage used as a backup filter. The effect of polydispersity of test aerosols on the performance was investigated. The results showed that the experimental 50-% cutoff diameters at each impactor's operation pressure were 0.53 and 0.187$\mu\textrm{m}$ for stages 1 and stage 2, respectively. The effects of operation pressure on the cutoff diameter and the steepness of collection efficiency curves were also investigated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.315-323
• /
• 2004

An electrical cascade impactor is a multi-stage impaction device to separate airborne particles into aerodynamic size classes using particle charging and electrical detection techniques. A Faraday cage and an aerosol charger, which are basic components of the electrical cascade impactor, were designed and evaluated in this study. The low-level current response of the Faraday cage was investigated with changing particle size and air flow rate by using sodium chloride (NaCl) particles. The response of the prototype Faraday cage was very similar to that of a commercial aerosol electrometer (TSI model 3068) within ${\pm}$5% for singly-charged particles. The response linearity of the prototype Faraday cage could be extended up to flow rate of 30 L/min. For the performance evaluation of the aerosol charger the monodisperse liquid dioctyl sebacate (DOS) particles, with diameters of 0.1∼0.8$\mu\textrm{m}$, were generated using spraying from an atomizer followed by evaporation-condensation process. Typical performance parameters of the aerosol charger such as P$.$n, wall loss, and elementary charges per particle were evaluated. The performance of the prototype aerosol charger was found to be close to that of the aerosol charger used in an electrical low pressure impactor (ELPI, Dekati).

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.135-137
• /
• 2002

In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.252-255
• /
• 2002

As more critical services are provided in the internet, the risk to these services from malicious users increases. Several networks have experienced problems like Denial of Service(DoS) attacks recently. We analyse a network-based denial of service attack, which is called SYM flooding, to TCP-based networks. It occurs by an attacker who sends TCP connection requests with spoofed source address to a target system. Each request causes the targeted system to send instantly data packets out of a limited pool of resources. Then the target system's resources are exhausted and incoming TCP port connections can not be established. The paper is concerned with a detailed analysis of TCP SYN flooding denial of service attack. In this paper, we propose a Real Time Scan Detector(RTSD) mechanism and evaluate it\`s Performance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.649-658
• /
• 2008

In this paper, we proposed an adaptive PSO(APSO) algorithm which changes parameter values with every recursion based on the conventional particle swam optimization(CPSO). In order to solve the optimization problem, the proposed APSO algorithm is applied to some functions, such as the De Jong function, Ackley function, Davis function and Griewank function. The superiority of the proposed APSO algorithm compared with the genetic algorithm(GA) is proved through the numerical experiment. Finally we applied the proposed algorithm to developing a function for personal magnetic field exposure based with real datas which are acquired based on the consumer research and field measuring instrument.

• The korean journal of orthodontics
• /
• v.44 no.5
• /
• pp.268-277
• /
• 2014

A Brazilian girl aged 14 years and 9 months presented with a chief complaint of protrusive teeth. She had a convex facial profile, extreme overjet, deep bite, lack of passive lip seal, acute nasolabial angle, and retrognathic mandible. Intraorally, she showed maxillary diastemas, slight mandibular incisor crowding, a small maxillary arch, 13-mm overjet, and 4-mm overbite. After the diagnosis of severe Angle Class II division 1 malocclusion, a mandibular protraction appliance was placed to correct the Class II relationships and multiloop edgewise archwires were used for finishing. Follow-up examinations revealed an improved facial profile, normal overjet and overbite, and good intercuspation. The patient was satisfied with her occlusion, smile, and facial appearance. The excellent results suggest that orthodontic camouflage by using a mandibular protraction appliance in combination with the multiloop edgewise archwire technique is an effective option for correcting Class II malocclusions in patients who refuse orthognathic surgery.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1849-1856
• /
• 2013

DOS attack, the short of Denial of Service attack is an internet intrusion technique which harasses service availability of legitimate users. To respond the DDoS attack, a lot of methods focusing attack source, target and intermediate network, have been proposed, but there have not been a clear solution. In this paper, we purpose the prevention of malicious activity and early detection of DDoS attack by detecting and removing the activity of botnets, or other malicious codes. For the purpose, the proposed method monitors the network traffic, especially DSN traffic, which is originated from botnets or malicious codes.

• Journal of KSNVE
• /
• v.4 no.1
• /
• pp.33-42
• /
• 1994

When a vibration is generated due to the misalignment, the reduction of the vibration level is not attainable unless a correct shaft alignment is conducted. In a turbine system, an alignment procedure requires quite a lot amount of expense and time. To reduce this effort, an algorithm of the turbine alignment is developed to be used in the computer program. The program consists of five parts : input, calculation, display of the results, file management, and printer output. In the input part, users must provide the data on the turbine number, the reference value of the alignment, and the number of the feet of the generator. In calculation, the moving distance of the bearing and the necessary amount of the shims are calculated. In the display and the output parts, the calculated results are displayed and calculated. In the display and the output parts, the calculated results are displayed and printed. Then, by using the file management, results and procedures conducted are saved in the floppy diskette or in the hard disk. The developed program can be run in IBM PC compatible with more than 640 KB of main memory with the operating system of MS-DOS v 3.3 or higher. It is developed for novice users with no experience or specialty in this field. The program is not only useful in the power plant application, but also helpful for recording of the alignment procedures.

• The Journal of Information Technology
• /
• v.7 no.4
• /
• pp.9-20
• /
• 2004

Result Dos that materialization KNU Virus Wall to solve serious problem Hurtfulness Virus is present network chiefly in this research to do not become and do correct disposal in situation such as internet and Multiple Protocol that is done intelligence anger for ESM, CIS and MIS side as secondary to solve this problem about out log analysis system embody. As a result, could use comprehensively, and can click by Site Design, Packet transmission, and used to interior internet (GroupWare) in information protection aspect because intelligence enemy to face each other ESM's various hacking and virus uses Enterprise Security Management system and CIS, whole web through Smart View and relation of security could do monitoring.

• Toxicological Research
• /
• v.17
• /
• pp.217-218
• /
• 2001

In a series of our screening for immunomodulating substances, we isolated prodigiosin from the culture broth qf Serratia marcescens B-1231. This compound inhibited the T cell-mediated immune responses such as concanavalin A-induced proliferation, mixed lymphocyte response, local graft versus host reaction and T-dependent antibody response at nontoxic concentrations. However. prodigiosin did not effect B cell-mediated immune functions such as lipopolysaccharide-induced proliferation and -activated polyclonal antibody production at the same concentrations. Prodigiosin did not cause death in vitro to lymphocytes at effective concentrations (＜100 nM) and also did not show toxicity in vivo to lymphoid organs at effective dos-ages (10 and 30 mg/kg). The pharmacological potencies were comparable to the activities of well-known T-cell specific immunosuppressants such as cyclosporin A. In our continuing study, mechanism of action of PDG is investigated with respect to the effect of PDG on IL-2/IL-2R pathway and transcription factor.