• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.45-51
• /
• 2022

Fear of contact exists due to the prevention of the spread of infectious diseases such as COVID-19. When using the common entrance door of an apartment, access is possible only if the resident enters a password or obtains the resident's permission. There is the inconvenience of having to manually enter the number and password for the common entrance door to enter. Also, contactless entry is required due to COVID-19. Due to the development of ICT, users can be easily identified through the development of face recognition and voice recognition technology. The proposed method detects a visitor's face through a CCTV or camera attached to the common entrance door, recognizes the face, and identifies it as a registered resident. Then, based on the registered information of the resident, it is possible to operate without contact by interworking with the elevator on the server. In particular, if face recognition fails with a hat or mask, the visitor is identified by voice or additional authentication of the visitor is performed based on the voice message. It is possible to block the spread of contagiousness without leaving any contactless function and fingerprint information when entering and exiting the front door of an apartment house, and without the inconvenience of access.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.320-325
• /
• 2002

The rail reform in Korea is to separate passenger transportation from freight transportation as a way to vitalize rail freight. The author review the problems rail freight faces, the aims of rail reform, the possibility to introduce competition into the rail freight operation, foreign cases of rail freight and make suggestions about the vitalization of rail freight transportation such as industry structure possible for door-to-door service and low cost operation, freight transportation policy of government, capacity expansion, preparedness for internationalization, mechanism for increasing transparency between users and operators and transfer to commerciality of the carrier.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.625-626
• /
• 2006

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies method of their products. To save time and cost in assembly process and to increase the quality of products, it is very important to choose an optimal assembly system. We propose a methodology that generates an optimal assembly system by using the Digital manufacturing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.5
• /
• pp.46-56
• /
• 2013

This research prepared safety standard for out-door fitness and this research's purpose is to evaluate and investigate safety condition for out-door fitness which was distributed in domestic residence by applying TUV standard which evaluate product's safety inspection. We choose twelve companies which have many sales' amount and investigated for ten out-door fitness which have high consumer preferences. As a result of that, the ratio of successful applicants for safety evaluation was 55.1%. The terms desired was evaluated highly in safety for out-door fitness's fixing condition. However, the terms desired was evaluated lowly in safety for movable condition. Fitness equipment which has high consumer preferences was compared lowly than other equipment in safety part. It was analyzed that there was no difference in safety evaluation according to manufacturing company. So, it is necessary to prepare safety standard by establishing law in order to prevent accident while they are using because we cannot think that fitness equipments which was distributed in domestic area have high safety. We think that preparing safety standard can influence on preventing accident and reinforcing out-door fitness manufacturing companies' competitive.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.340-346
• /
• 2003

This study suggests that low cost companies should be created and entered into rail freight market and rail freight operation should be integrated into road transportation to increase the competitiveness of rail freight transportation and to supply door-to-door services. Foreign Cases are bench marked and analysed.

• Composites Research
• /
• v.30 no.2
• /
• pp.158-164
• /
• 2017

The fiber metal laminate is a type of hybrid materials laminated thin metallic sheets with fiber reinforced plastic sheets. The laminate has been researched or applied in automotive and aerospace industries due to their outstanding impact absorbing performance in view of light weight aspect. Specially, the replacement of side-impact beam as the fiber reinforced plastic has been researched actively. The objective of this paper is the primitive investigation in the development of side-door impact beam using the fiber metal laminate. First, the three-point bending simulations were conducted to decide the shape of impact beam using the numerical analysis. Next, two cases impact beam (pure DP 980 and fiber metal laminate) were installed in the side-door, and then the bending tests (according to FMVSS 214S) were simulated using the numerical analysis. It is noted that the side-door impact beam can be replaced with the fiber metal laminate sufficiently based on the numerical analysis results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1123-1128
• /
• 2001

In this study, As a plan of essential solution for out-door air pollution, a basic study was carried out to develop a paint with photocatalystic $TiO_{2}$ which can eliminate the $NO_{X}$ from atmosphere. A series of Experiment were carried out according to kind of binder, photocatalyst, light source. Through Experiment of out-door exposure test, the endurance ability and NOx removal efficiency of the specimen were evaluated.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.34 no.6
• /
• pp.15-18
• /
• 1997

21세기의 고속해상교통수단으로 등장할 초고속화물선의 필요성, 핵시기술, 개발실적, 실용화에 대하여 소개하였다. 더 나아가 해상급유를 고려한 태평양항로용 대형초고속화물선도 여러분야의 고도기술력과 집중적 개발비 그리고 산.학.연.관의 추진체계로 가능할 것이다. 세계물동량의 대부분이 해상수송으로 이루어지고 있어 초고속화물선의 등장으로 21세기에는 door-to-door 서비스의 일관된 물류시스템이 우리 곁에 다가올 것으로 기대해 본다. 아울러 초고속선 기술은 조선산업의 고부가차기화를 통한 국제경쟁력을 강화시키고 우리나라 조선산업의 미래 조선산업에서의 주도적 역할 수행에 기여할 것으로 보인다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.69-72
• /
• 2006

The objective of this study is to find out the shear capacity of URM wall and the variables that affect the shear capacity of URM wall such as the opening and the aspect ratio, considering four kinds of failure modes, sliding shear failure, toe crushing failure, and diagonal shear failure. The main varialble is the shape of opening of URM walls. First URM has one door, second has one window, third hase one door and one window, the last has two windows. The test results of URM with openings show that the specimens are governed by rocking failure mode.