• 건축역사연구
• /
• 제1권1호
• /
• pp.33-43
• /
• 1992

The purpose of this study is to investigate the transformation of openings installed on the partition wall between Daechung and Bang, through the case study on MyungRyunDangs of 19 HangGyos in Kyungbuk province. The way to carry out this study was to look through existing situations and to find out transformed traces of the openings in terms of their locations on several floor types. The transformation of the openings was analyzed chronologically into two cases of 'before 18C' and 'after 18C'. i) Before 18C ; the early type had double swing window on the front column spacing and single swing door on the rear, and the later type had swing door on the front column spacing and on openings on the rear. ii) After 18C; the earlist type was the same as the later type of 'before 18C', the next type had swing doors on both the front and the rear column spacing, and the last type had Sabunhap-swing door on the column spacing, iii) Through those transformations, the windows gradually replaced by the doors in the openings.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.153-160
• /
• 2019

Welding often results in welding distortion during the assembly process. The welding distortion of thin-plate structures such as the living quarters of ships and offshore installations is a more significant problem than in the case of thick-plate structures. Pre-stressing/heating and fairing, which are additional works to mitigate and control welding distortion, are inevitable, and the construction planning is accordingly delayed. In order to prevent welding distortion and minimize the additional work during the assembly process, increasing the plate thickness and/or the number of stiffeners may be a simple solution, but it may give rise to problems related to cost and weight. In this study, the welding distortion control effect of the type of stiffeners on the door openings of various living quarter structures was investigated using an experimental method and a finite element method. The results showed the feasibility of mitigating and controlling the welding distortion, and the optimum selection of the type of stiffeners was confirmed.

• 한국주거학회논문집
• /
• 제5권2호
• /
• pp.29-40
• /
• 1994

The purpose of this study is to survey the transition of the type of openings in korean traditional archiectures. To do this, various types of openings at the backside of Daechung of 23 Hyang-Gyo Myung-Ryun-Dangs were investigated. After the classification in some groups according to their types and their periods of constuction, the tasnsition of the type of openings was analysed. Results are as follows. (1) The openings constructed form 16th to 17th century, the earliest form, is a ledged and battened panel window(or framed and ledged panel window) whose mullion is built on the frame of window. It is presumed that these types were widely used before 17th century. (2) The next type is ledged and battened panel window(door) (or framed and ledged panel window) which lacks a mullion. These types were thought to be customed after 18th century. (3) The lastest type, which is appeared from 19th to 20th century, is an characteristic backside opening(ledged and battened panel window or framed and ledged panel window) that among 3 column spacings the central one is enlarged in comparison with the right and left ones. Through this transition pattern of the openings, can be menifested that the trend of 20th century is to enlarge convenience of usage by constuctiong door and eliminating some windows.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.69-72
• /
• 2006

The objective of this study is to find out the shear capacity of URM wall and the variables that affect the shear capacity of URM wall such as the opening and the aspect ratio, considering four kinds of failure modes, sliding shear failure, toe crushing failure, and diagonal shear failure. The main varialble is the shape of opening of URM walls. First URM has one door, second has one window, third hase one door and one window, the last has two windows. The test results of URM with openings show that the specimens are governed by rocking failure mode.

• Structural Engineering and Mechanics
• /
• 제87권5호
• /
• pp.487-498
• /
• 2023

Unreinforced masonry (URM) buildings are extensively adopted in many of the growing nations, particularly in India. Window or door openings are required for architectural or functional reasons, which pose a threat to the building's safety. The past earthquakes have shown that the seismic capability of these structures was very weak. Strengthening these unreinforced masonry walls using welded wire mesh (WWM) is one of the most commonly and economical methods. The present experimental study investigates the impact of openings on the shear behaviour of URM walls and the effectiveness of WWM in enhancing the shear performance of masonry wall. In the experimental program 16 specimens were cast, 8 unstrengthen and 8 strengthened specimens, under 8 unstrengthen and strengthened specimens, every 2 specimens had 0%, 5%, 10%, and 15% openings and all these walls were tested under diagonal compression. The results show that the shear carrying capacity reduces as the opening percentage increases. However, strengthening the URM specimens using WWM significantly improves the peak load, shear strength, ductility, stiffness, and energy dissipation. Furthermore, the strengthening of the URM walls using WWM compensated the loss of wall capacity caused by the presence of the openings.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.63-69
• /
• 2014

This paper studies the strength, fatigue sensitivity, safety factor and lifetimes by means of structural and fatigue analyses of different models of rear doors upon the opening of doors and windows leading to severe fatigue fractures of the window motor components of rear doors. The simulation models were a standard model and other models. The other models, which are denoted here as models I and II, were modified versions of the standard model, with a rib of 3mm and a thickness of 2mm as compared to the standard model. The door was modelled with CATIA V5 and analyzed with the ANSYS program. The material of the rear door was cold rolled steel (DDQ). From the study results, the standard model and model I were confirmed to be less safe upon the opening of the door as compared to the opening of a window in terms of fatigue, but model II was found to be safe for both door and window openings.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.18-25
• /
• 2015

Computational study of a gravity current prior to the backdraft was conducted using fire dynamic simulator (FDS). Various initial conditions of mixture compositions and compartment temperature as well as four opening geometries (Horizontal, Door, Vertical, and Full opening) were considered to figure out their effects on the gravity current. The density difference ratio (${\beta}$) between inside and outside of compartment, the gravity current time ($t_{grav}$) and velocity ($v_{grav}$), and non-dimensional velocity ($v^*$) were introduced to quantify the flow characteristics of the gravity current. Overall fluid structure of the gravity current at the fixed opening geometry showed similar development process for different ${\beta}$ conditions. However, $t_{grav}$ for entering air to reach the opposed wall to the opening geometry increased with ${\beta}$. Door, Vertical, and Horizontal openings where openings are attached on the ground showed similar development process of the gravity current except for Horizontal opening, which located on the middle of the opening wall. The magnitude of $v_{grav}$ at fixed ${\beta}$ was, from largest to smallest, Full > Vertical > Door > Horizontal, but it depended on both the size and location of the opening. On the other hand, $v^*$ was found to be independent to ${\beta}$, and only depended on the geometry of the opening.

• 한국방재학회 논문집
• /
• 제9권3호
• /
• pp.89-94
• /
• 2009

초고층 주상복합 건축물은 구조적으로 수직샤프트의 길이가 길고 24시간 냉난방이 이루어지는 용도적인 특성으로 혹서기 심야시간대에 실내외 온도차에 의한 연돌효과가 다른 건물보다 크게 발생한다. 또한, 하부 층에는 개구율이 높은 판매시설 및 지하주차장 등이 위치하고 있어 중성대가 상대적으로 낮게 형성되는 압력분포 특성을 가지고 있다. 이러한 압력분포는 화재위험도가 높은 하부 층에서 화재발생 시 중성대 이상층 전체가 연기확산의 위험에 노출되고 출입문 개방장애 등의 피난장애를 가져올 수 있음을 예측할 수 있다. 이에 본 연구에서는 초고층주상복합건축물에서의 수직 및 수평 압력분포를 정상조건 및 배연창개방조건에 따라 계단실, 부속실, 복도에서의 압력을 측정하고 압력분포특성을 분석하였다.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1516-1523
• /
• 2015

본 연구는 해상풍력 강재타워의 출입문에 발생되는 응력집중에 대해 상세히 기술하고 있다. 원형강재 풍력타워에는 8종류의 하중조합이 작용하며 그 하중조합은 극한한계상태와 사용한계상태를 고려한 정상 및 이상시 운영상태를 고려하고 있다. 유한요소해석 및 변수연구에 범용해석프로그램인 ABAQUS를 사용하였으며 응력값이 변화되는 곳을 고려하여 변위 및 응력을 검토하였다. 출입문 주변의 응력집중현상을 비교분석하기 위하여 출입문이 없는 경우, 출입문은 없으나 보강재가 있는 경우, 출입문 및 보강재가 모두 적용된 경우로 구분하여 해석연구를 수행하였다. 분석내용은 본문에 자세히 기술하고 있으며, 해석결과 응력집중계수 평균값은 1.47, 최대값은 1.81로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.651-664
• /
• 2008

The purpose of this study is to develop a rehabilitation technique for heavily earthquake damaged masonry buildings. A full scale one storey masonry building with window and door openings was manufactured and tested on the shock table by applying increased amplitude free vibration up to the point where heavy earthquake damage was observed. Damaged test building was rehabilitated with vertical and diagonal steel straps and then tested again. The effectiveness of improvements obtained by the rehabilitation technique was investigated. Steel straps improved the lateral strength and stiffness of masonry walls and limited the lateral displacement of building. Stability of the masonry walls were also improved by the steel straps. Steel straps reduced the natural period of the earthquake damaged masonry building and prevented the failure of the building at the same amplitude of free vibration.