DOI QR코드

DOI QR Code

Rehabilitation of heavily earthquake damaged masonry building using steel straps

  • Altin, Sinan (Gazi University, Civil Eng. Dept.) ;
  • Kuran, Fikret (Civil Eng., The Turkish Ministry of Public Works and Settlement) ;
  • Anil, Ozgur (Gazi University, Civil Eng. Dept.) ;
  • Kara, M. Emin (Aksaray University, Civil Eng. Dept.)
  • 투고 : 2007.07.02
  • 심사 : 2008.11.05
  • 발행 : 2008.12.20

초록

The purpose of this study is to develop a rehabilitation technique for heavily earthquake damaged masonry buildings. A full scale one storey masonry building with window and door openings was manufactured and tested on the shock table by applying increased amplitude free vibration up to the point where heavy earthquake damage was observed. Damaged test building was rehabilitated with vertical and diagonal steel straps and then tested again. The effectiveness of improvements obtained by the rehabilitation technique was investigated. Steel straps improved the lateral strength and stiffness of masonry walls and limited the lateral displacement of building. Stability of the masonry walls were also improved by the steel straps. Steel straps reduced the natural period of the earthquake damaged masonry building and prevented the failure of the building at the same amplitude of free vibration.

키워드

참고문헌

  1. Building Counting Result (2000), Institute of Statistics of the Turkish Republic, Ankara
  2. Building Counting Result (2000), Institute of Statistics of the Turkish Republic, Ankara
  3. Calvi, G.M. and Bolognini, D. (2001) 'Seismic response of reinforced concrete frames infilled with weakly reinforced masonry panels', J. Earthq. Eng., 5(2), 153-185 https://doi.org/10.1142/S136324690100039X
  4. Alococer, S.M., Ruiz, J., Pineda, J.A., and Zepedam J.A. (1996), 'Retrofitting of confined masonry walls with welded wire mesh', 11th World Conference on Earthquake Engineering, Paper No:1471 Acapulco, Mexico
  5. ElGawady, M.A., Lestuzzi, P., and Badoux, M. (2006), 'Shear strength of URM walls retrofitted using FRP', Eng. Struct., 28, 1658-1670 https://doi.org/10.1016/j.engstruct.2006.03.005
  6. Shrive, N.G. (2006), 'The use of fibre reinforced polymers to improve seismic resistance of masonry', Constr. Build. Mater., 20, 269-277 https://doi.org/10.1016/j.conbuildmat.2005.08.030
  7. Turco, V., Secondin, S., Morbin, A., Valluzzi, M.R., and Modena, C. (2006), 'Flexural and shear strengthening of un-reinforced masonry with FRP bars' Compos. Sci. Technol., 66, 289-296 https://doi.org/10.1016/j.compscitech.2005.04.042
  8. ElGawady, M.A., Lestuzzi, P., and Badoux, M. (2006), 'Aseismic retrofitting of unreinforced masonry walls using FRP', Compos. Part B, 37, 148-162 https://doi.org/10.1016/j.compositesb.2005.06.003
  9. Paquette, J. and Bruneau, M. (2006), 'Pseudo-dynamic testing of unreinforced masonry building with flexible diaphragm and comparison with existing procedures', Constr. Build. Mater., 20 220-228 https://doi.org/10.1016/j.conbuildmat.2005.08.025
  10. De Sortisa, E., Antonacci, F., and Vestronic, A. (2005), 'Dynamic identification of a masonry building using forced vibration tests', Eng. Struct., 27, 155-165 https://doi.org/10.1016/j.engstruct.2004.08.012
  11. Klingner, R.E. (2006), 'Behavior of masonry in the Northridge (US) and Tecoma'n-Colima (Mexico) earthquakes: Lessons learned, and changes in US design provisions', Constr. Build. Mater., 20, 209-219 https://doi.org/10.1016/j.conbuildmat.2005.08.024
  12. Kim, S.C. and White, D.W. (2004), 'Nonlinear analysis of a one-story low-rise masonry building with a flexible diaphragm subjected to seismic excitation', Eng. Struct., 26, 2053-2067 https://doi.org/10.1016/j.engstruct.2004.06.008
  13. Taghdi, M., Bruneau, M., and Saatcioglu, M. (2000), 'Seismic retrofitting of low-rise masonry and concrete walls using steel straps,' J. Struct. Eng., ASCE, 126(9), 1017-1025 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1017)
  14. Taghdi, M., Bruneau, M., and Saatcioglu, M. (2000), 'Analysis and design of low-rise masonry and concrete walls retrofitted using steel straps,' J. Struct. Eng., ASCE, 126(9), 1026-1032 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1026)
  15. Kuran, F. (2006), 'Retrofitting of masonry structures using steel straps', Gazi University, Institute of Science and Technology, M.Sc. Thesis, 181 (In Turkish)
  16. FEMA 273 (1997), 'NEHRP guidelines for the seismic rehabilitation of buildings', Applied Technology Council (ATC-33 Project)
  17. FEMA 306 (1998), 'Evaluation of earthquake damaged concrete and masonry wall buildings', Applied Technology Council (ATC-43 Project)
  18. FEMA 356 (2000), 'Prestandard and commentary for the seismic rehabilitation of buildings', ASCE, Federal Emergency Management Agency, November
  19. Cherry, S. (1968), 'Dynamics of structures', Int. Ins. Seismol. Earthq. Eng., Tokyo, Japan, 19-30

피인용 문헌

  1. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2008, https://doi.org/10.12989/eas.2010.1.3.269
  2. Minimum deformability design of high-strength concrete beams in non-seismic regions vol.8, pp.4, 2008, https://doi.org/10.12989/cac.2011.8.4.445
  3. Inelastic design of high-axially loaded concrete columns in moderate seismicity regions vol.39, pp.4, 2008, https://doi.org/10.12989/sem.2011.39.4.559
  4. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2008, https://doi.org/10.12989/sem.2011.40.4.541
  5. Comparison of seismic performances of reinforced concrete frames strengthened by different techniques vol.18, pp.2, 2021, https://doi.org/10.1590/1679-78256340