• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.923-927
• /
• 2017

고온/고압/산화제 과잉 환경에 노출되는 금속들은 급격한 산화(발화 및 연소)가 일어날 수 있다. 따라서, 본 연구에서는 고온/고압/산화제 과잉 환경에 적합한 금속 재질의 선정을 위해 수행되었다. 고온, 고압, 산화제 과잉 분위기를 만들기 위해서 과산화수소의 촉매반응 활용한 시험 설비를 구축하고 STS 계열 금속 재질에 대한 금속 산화 및 발화에 대한 평가를 진행하였다. 그 결과, 선정된 재질의 변형(변색) 및 표면 거칠기에 변화가 관찰되었지만, 시편의 무게 및 두께에 대한 변화는 크지 않음을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.843-848
• /
• 2017

고온/고압/산화제 과잉 환경에 노출되는 금속들은 급격한 산화(발화 및 연소)가 일어날 수 있다. 본 연구에서는 시편에 전력을 공급하여 시편 온도를 직접 제어하는 방식의 직류전원장치 시험설비를 구축하고 고온/정체/산화제 과잉 환경을 모사하여 STS 계열 금속 재질에 대한 금속 산화 및 발화에 대한 평가를 진행하였다. 그 결과, 선정된 재질의 변형(변색), 표면 거칠기에 변화와 금속 표면의 박리 현상이 관찰되었으며 무게 및 시편 두께에 변화가 있음을 확인하였다. 시편 중 가장 산화가 심한 시편은 STS 304이며 산화가 덜한 시편은 XM-19로 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1026-1030
• /
• 2017

본 연구에서는 극초음속 추진기관을 위한 시험설비의 장치인 초음속 디퓨저 설계하였고, 두 가지 수축비를 변수로 선정하여 각각의 디퓨저를 수치해석 및 상온 시험을 진행하였다. 수치해석을 통하여 각각의 마하수와 압력에 대한 내부 유동을 확인하였다. 상온 시험을 통하여 진공챔버에 형성되는 압력과 벽면 압력을 통하여 내부에 형성되는 압력을 확인할 수 있었다. 상온 시험과 수치해석의 차이점을 분석하고, 향후 극초음속 추진기관을 위한 시험설비를 구축할 기초자료를 확보하였다.

• Mycobiology
• /
• 제38권2호
• /
• pp.133-136
• /
• 2010

Stromatal fruiting bodies of Cordyceps cardinalis were successfully produced in cereals. Brown rice, German millet and standard millet produced the longest-length of stromata, followed by Chinese pearl barley, Indian millet, black rice and standard barley. Oatmeal produced the shortest-length of fruiting bodies. Supplementation of pupa and larva to the grains resulted in a slightly enhanced production of fruiting bodies; pupa showing better production than larva. 50~60 g of brown rice and 10~20 g of pupa mixed with 50~60 mL of water in 1,000 mL polypropylene (PP) bottle was found to be optimum for fruiting body production. Liquid inoculation of 15~20 mL per PP bottle produced best fruiting bodies. The optimal temperature for the formation of fruiting bodies was $25^{\circ}C$, under conditions of continuous light. Few fruiting bodies were produced under the condition of complete darkness, and the fresh weight was considerable low, compared to that of light condition.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.621-627
• /
• 2005

It is analysised the causes and extent of damage of natural disasters through the investigating of natural disaster states occurred in Gyeongsangnam-do. The data for this study were based on disaster annual report between 1987 and 2003. Especially, the data between 1993 and 2003 were used for the analysis in Gyeongsangnam-do area. A typhoon and a heavy rain were the major causes of the natural disasters in Gyeongsangnam-do. For all that the extent of damage by a heavy rain was twice as much as that of a typhoon, Gyongsangnam-do suffered heavy damage from a typhoon. So, special attentions should be paid to establish prevention plans for that in this area. Also, half of the natural disasters were occurred between July and August, the intensive prevention plans for the summer season are needed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1884-1886
• /
• 2005

KrF 펄스 레이저 증착법(pulsed laser deposition: PLD)으로 ZnO 박막을 증착하여 평판 디스플레이 소자 구동용 박막 트랜지스터(thin film transistor) 소자를 제작하였다. 전도성이 높은 실리콘웨이퍼(c-Si, 하부전극) 기판 위에 LPCVD 법으로 silicon nitride 박막을 절연막으로 형성하고, 다양한 공정 조건에서 펄스 레이저 증착법으로 제작한 ZnO 박막을 증착하여 채널층으로 하였으며, Al 박막을 증착하고 패터닝하여 소스 및 드레인 전극으로 하였다. ZnO 박막의 증착 시에 기판 온도를 다양하게 조절하고 산소 분압을 변화시켜 ZnO 박막의 특성을 조절하였다. 제작된 박막의 표면특성은 AFM(atomic force microscopy)로 분석하고, 결정특성은 XRD(X-ray diffraction)로 조사하였다. ZnO 박막의 전기적 특성은 Hall-van der Pauw 법으로 측정하였고, 광학 투과도(optical transparency)를 UV-visible photometer로 조사하였다. ZnO-TFT 소자는 $10^6$ 수준의 on-off ratio와 $2.4{\sim}6.1cm^2/V{\cdot}s$의 전계효과이동도(field effect mobility)를 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1881-1883
• /
• 2005

In this study, PZT thin films were fabricated using sol-gel Processing onto $Si/SiO_2/Ti/Pt$ substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C$, $650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}\;A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1148-1150
• /
• 2003

Power conversion system must be increased switching frequency in order to achieve a small size, a light weight and a low noise. However, the switches of converter are subjected to high switching power losses and switching stresses. As a result of those, the power system brings on a low efficiency. To improved these, a large number of soft switching topologies included a resonant circuit has been prosed. But these circuits increase number of switch in circuit and complicate sequence of switching operation. In this paper, the authors propose a high power factor and high efficiency DC-DC converter using single-pulse soft switching by partial resonant switching node. The switching devices in a prosed circuit are operated with soft switching by the partial resonant method, that is, Partial Resonant Switch Mode Power Converter. The partial resonant circuit makes use of a inductor using step up and a condenser of loss-less snubber. The result is that the switching loss is very low and the efficiency of system is high. Also the proposed converter is deemed the most suitable for high power applications where the power switching devices are used. Some simulative results on computer results are included to confirm the validity of the analytical results.

• 한국환경복원기술학회지
• /
• 제13권6호
• /
• pp.63-74
• /
• 2010

In this study, wetlands and forest vegetation surrounding rail, road of DMZ area and Civilian Control Line were studied as follows: Plant communities hierarchical system of forest vegetation classified according to the results of phytosociological methods of Braun-Blanquet (1964) as; Quercus mongolica community, Quercus mongolica-Quercus variabilis community and Quercus acutissima -Quercus mongolica community. Wetland vegetation major communities; Scirpus wichurae community, Scirpus fluviatilis community, Juncus effusus var. decipiens community, Typha orientalis community, Typha angustata community, Juncus alatus community, Miscanthus sacchariflorus community, Phragmites communis-Miscanthus sacchariflorus community, Hragmites communis community, Phragmites communis-Alnus japonica community, Alnus japonica community, Phragmites japonica community, Salix koreensis community, Prunus padus community, Alnus japonica community, Zizania latifolia community and Amorpha fruticosa community were surveyed. Coastal sand dune vegetation in a DMZ area and the Civilian Control Line was mainly characterized by; Carex pumila, Elymus mollis, Carex kobomugi, Rosa rugosa, Calystegia soldanella, Lathyrus japonica and Aster hispidus, species that are of typically sand dune vegetation.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.149-152
• /
• 2008

This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for fallen leaves layer, humus layer, and soil layer in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring and 1 time in fall. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on fallen leaves layer, humus layer, and soil layer in the forest. for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days in spring and fall for fallen leaves layer, and the convergence was made more than six days in spring and fall for the humus layer. In the other case of soil layer, the variation of moisture containing ratio after rainfall was not distinguishable regardless of season.