• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• Clinical Nutrition Research
• /
• v.5 no.4
• /
• pp.279-289
• /
• 2016

The adequate dietary intake is important to maintain the nutritional status of the patients after pancreatic cancer surgery. This prospective study was designed to investigate the dietary intake and the nutritional status of the patients who had pancreatic cancer surgery. Thirty-one patients (15 men, 16 women) were enrolled and measured body weight, body mass index (BMI), nutritional risk index (NRI), and Malnutrition Universal Screening Tool (MUST). Actual oral intake with nutritional impact symptoms recorded on the clinical research foam at every meal and medical information were collected from electronic medical charts. The rates of malnutrition at admission were 45.1% (14/31) and 28.9% (9/31) by NRI and MUST method, respectively, but those were increased to 87% (27/31) and 86.6% (26/31) after operation on discharge. The median values of daily intake of energy, carbohydrates, fat, and protein were 588.1 kcal, 96.0 g, 11.8 g, and 27.0 g, respectively. Most patients (n = 20, 64.5%) experienced two or more symptoms such as anorexia, abdominal bloating and early satiety. There were negative correlations between C-reactive protein (CRP) levels and the intake of total energy, protein, fat, and zinc. The rates of malnutrition were increased sharply after surgery and the dietary intake also influenced the inflammatory indicators. The results suggested that need of considering special therapeutic diets for the patients who received pancreatic surgery.

• Korean Journal of Dental Materials
• /
• v.43 no.1
• /
• pp.43-50
• /
• 2016

The aim of this study was to investigate the effect of multiwall carbon nanotube functionalized with carboxyl group (MWCNT-COOH) on the mechanical properties of dental glassionomer cement (GIC). MWCNT-COOH was prepared by the acid oxidative method. The MWCNT-COOH was incorporated into a commercial GIC powder or liquid at 0.5 wt% or 1.0 wt%. The net setting time of the cements was measured in accordance with ISO 9917 (Dental water-based cement). Specimens for compressive strength ($4mm{\varphi}{\times}6mm$), diametral tensile strength ($6mm{\varphi}{\times}4mm$) and flexure strength with modulus ($2mm{\times}2mm{\times}25mm$) were prepared by mixing with the cement liquid and kept in water bath of $(37{\pm}1)^{\circ}C$. Mechanical tests were conducted in 1 d, 7 d, and 14 days at a cross-head speed of 1 mm/min. Compressive strength of GIC mixed with 0.5 wt% MWCNT-COOH increased significantly at 7 d. However, overall mechanical properties of GIC modified with MWCNT were not significantly increased with a delayed setting time, in comparison with control cement. Overall results indicated that the MWCNT/GIC composite cements showed a limited strengthening effect for dental glassionomer cement.

• Food Science and Biotechnology
• /
• v.27 no.6
• /
• pp.1843-1856
• /
• 2018

Tea is one of the most frequently consumed drinks due to its favourite taste and the health benefit. Tea is produced by several processes and drying is very important step to develop the flavour and destroys the enzymes in tea. However, during drying tea, polycyclic aromatic hydrocarbons some of which are carcinogen and genotoxin are naturally produced. The risk of PAHs by drinking tea was characterized by determining contents of 4 PAHs in tea. 4 PAHs including Benz(a)anthracene (BaA), Chrysene (CHR), Benzo(b)fluoranthene (BbF) and Benzo(a)pyrene (BaP) were investigated by GC-MS in total 468 tea products, which were contaminated up to $4.63ng\;g^{-1}$. Mate tea was the most highly contaminated by BaA, CHR, BbF and BaP and followed by Solomon's seal and Chrysanthemum. The Margin of Exposures calculated by the concentration of BaA, CHR, BbF and BaP and consumption amount of tea were higher than 10,000, and the risk of PAHs in tea were low concern to public health.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.339-348
• /
• 1999

To extract value-added products which are important in scientific area and practical life, e.g. digital elevation models, ortho-rectified images and geometric corrected images, Satellite Technology Research Center at Korea Advanced Institute of Science and Technology has developed a satellite image processing software called "Valadd-Pro". In this paper, "Valadd-Pro" software is briefly introduced and its main components such as precise geometric correction, ortho-rectification and digital elevation model extraction component are described. The performance of "Valadd-Pro" software was assessed on 10m resolution 6000 $\times$ 6000 SPOT panchromatic images (60km $\times$ 60km) using ground control points from GPS measurements. The height accuracy was measured by comparing our results with 100m resolution $DTEDs^{1)}$ produced by USGS and 60m resolution DEMs generated from digitized contours produced by National Geography Institute. Also, to show the superior performance of "Valadd-Pro" software, we compared the performance with that of commonly used PCI$\circledR$ commercial software. Based on the results, the geometric correction of "Valadd-Pro" software needs fewer ground control points than that of PCI$\circledR$ software and the ortho-rectification of "Valadd-Pro" software shows similar performance to that of PCI$\circledR$ software. In the digital elevation model extraction, "Valadd-Pro" software is two times more accurate and four times faster than PCI$\circledR$ software.ccurate and four times faster than PCI$\circledR$ software.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• The Journal of Internal Korean Medicine
• /
• v.40 no.5
• /
• pp.814-821
• /
• 2019

Objective: This case study reports on the result of Korean medicine treatment of diffuse esophageal spasm. Methods: A 46-year-old female Korean patient with diffuse esophageal spasm received electroacupuncture, herbal medicine, and moxibustion treatment for 2 weeks in hospital. Results: Decreases in the visual analog scale (VAS) (from 8.7 to 7.0), numeric rating scale (NRS) (from 7.0 to 5.5), gastrointestinal symptom rating scale (GSRS) (from 9 to 6), and gastroesophageal reflux disease-health related quality of life questionnaire (GERD-HRQL) (from 46 to 38) scores were observed after the treatment. Conclusion: Evaluation of Korean medicine treatment is worthwhile for rare diseases like diffuse esophageal spasm.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.10
• /
• pp.411-420
• /
• 2019

Camera model identification has been a subject of steady study in the field of digital forensics. Among the increasingly sophisticated crimes, crimes such as illegal filming are taking up a high number of crimes because they are hard to detect as cameras become smaller. Therefore, technology that can specify which camera a particular image was taken on could be used as evidence to prove a criminal's suspicion when a criminal denies his or her criminal behavior. This paper proposes a deep learning model to identify the camera model used to acquire the image. The proposed model consists of four convolution layers and two fully connection layers, and a high pass filter is used as a filter for data pre-processing. To verify the performance of the proposed model, Dresden Image Database was used and the dataset was generated by applying the sequential partition method. To show the performance of the proposed model, it is compared with existing studies using 3 layers model or model with GLCM. The proposed model achieves 98% accuracy which is similar to that of the latest technology.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.259-276
• /
• 2009

The study herein has focused on offering foundation infrastructure in order for seamen who arrive at Korean ports to use internet service smoothly in waiting time and free time. It also concentrated on how to build communication infrastructure for efficient operations when improving existing ports and developing new ports. For this, it has grasped the tendency of researches concerning the existing port communication and has also investigated the status and problems of communication infrastructure being used currently in ports. So it has suggested several realistic development methods based on mesh network and has reviewed them in terms of the stability, economic feasibility and efficiency. Additionally, this research offers the results of the performance test conducted on major equipment in market by the suggested methods. This research can be a good guideline in building wireless communication systems of ports and is expected to contribute to creating traffic volume by improving the image of ports.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.554-559
• /
• 2006

The currently common housing is obviously going to be under the reconstruction in just $20{\sim}30$ years, with the failure to satisfy the improvement of national income, diversification and advance of national demand. But, reckless and random reconstruction Induce the serious problem of environmental pollution involving the loss of national treasury and excess materials of constructions. In order to address such problem, the common housing of longevity, which can adequately cope with the changes of times and tastes of inhabiters, in the future, is arising as an alternative. Recently, the groundbreaking phase of common housing is also being considered as another alternative to resolve such problem. The common housing of longevity has an advantage to create a free and comfortable space in accordance with the tastes of inhabiters, as well as expanding the durability of building. But, the current facility system has an inability to deal with the sort of housing. Thus, the research paper is designed to make an analysis on problems of common housing in South Korea, which has made it difficult to handle a changing space, and based on the analysis, the paper is intended to make a review on the future-oriented facility service appropriate enough to deal with the changing aspects of space.