• 전기학회논문지P
• /
• 제58권2호
• /
• pp.101-107
• /
• 2009

This paper deal with development of on-line type voltage sag compensation system using supercapacitor EDLC to solve the voltage sag problems which are considered to be dominant disturbances affecting the power quality. With the wide use of semiconductor devices in electrical equipment, modem-type loads are becoming increasingly sensitive to the voltage sags and the disturbances prove to be costly to industries. Supercapacitor EDLC is employed to compensate dynamically for the voltage sag of system with sensitive loads. This capacitor has higher energy density than the electrolytic capacitor. Also, this capacitor has a lot of advantage such as no maintenance, longer life cycle and faster charge-discharge time than the battery system. Therefore, in this paper, the energy design scheme of supercapacitor and the configuration technique of on-line type voltage sag compensation systems are newly introduced. According to the results of experimental of prototype 5[kVA] system, it is verified that the developed system has effectiveness of voltage sag compensation by using a supercapacitor EDLC.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.15-16
• /
• 2008

We have grown N-doped ZnO thin films on sapphire substrate by employing dielectric barrier discharge in pulsed laser deposition (DBD-PLD). DBD guarantees an effective way for massive in-situ generation of N-plasma under the conventional PLD process condition. Low-temperature photoluminescence spectra of the N-doped ZnO film provided near band-edge emission after thermal annealing process. The emission peak was resolved by Gaussian fitting and showed a dominant acceptor-bound exciton peak ($A^0X$) that indicated the successful p-type doping of ZnO with N.

• 전기전자학회논문지
• /
• 제10권2호통권19호
• /
• pp.149-155
• /
• 2006

In this study, the design of low voltage DC-DC converter with low triggering ESD (Electro-Static Discharge) protection circuit was investigated. The purpose of this paper is design optimization for low voltage(2.5V to 5.5V input range) DC-DC converter using CMOS switch. In CMOS switch environment, a dominant loss component is not switching loss but conduction loss at 1.2MHz switching frequency. In this study a constant frequency PWM converter with synchronous rectifier is used. And zener Triggered SCR device to protect the ESD phenomenon was designed. This structure reduces the trigger voltage by making the zener junction between the lateral PNP and base of lateral NPN in SCR structure. The triggering voltage was simulated to 8V.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.414-419
• /
• 1995

The wire displacement of wire electric discharge machine has been measured using He-Ne laser. A measurement system consisted of He-Ne laser, A/D converter, 4 divided photodiode, amplifier, sensor process instrument, and personal computer. The processing parameters were varid with feed rate, wire tension, wire speed and voltage. The laser beam intensity transmitted on a 4 divided photodiode was varied by processing wire electric descharge machine with various process parameters. The 4 divided photodiode and amplifier were used to change the detected beam intensity into voltage. Variation of wire displacement was between 11 and 125 .mu. m. The wire tension was dominant on the variation of wire displacement among many parameters.

• 방사성폐기물학회지
• /
• 제16권1호
• /
• pp.11-39
• /
• 2018

Tritium and $^{14}C$ are two most important radionuclides released from nuclear facilities to the environment, and $^{14}C$ contributes dominant radiation dose to the population around nuclear power plants. This paper presents an overview of the production, pathway, species and levels of tritium and $^{14}C$ in nuclear facilities, mainly nuclear power plants. The methods for sampling and collection of different species of tritium and $^{14}C$ in the discharge gas from the stack in the nuclear facilities, atmosphere of the nuclear facilities and environment are presented, and the features of different methods are reviewed. The on-line monitoring methods of gaseous tritium and $^{14}C$ in air and laboratory measurement methods for sensitive determination of tritium and $^{14}C$ in collected samples, water and environmental solid samples are also discussed in detailed. Meanwhile, the challenges in the determination and speciation analysis of tritium and $^{14}C$ are also highlighted.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.215-218
• /
• 2001

A pulsed Nd:YAG laser is used widely for materials processing and medical instrument. It's very important to control the laser energy density in those fields using a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this paper, the alternating charge and discharge system was designed to adjust a pulse repetition rate. This system is controlled by microprocessor and allows to frequence an expensive condenser for high frequency to cheap one for low frequency. In addtion, The microcontroller monitors the flow of cooling water, short circuit, and miss firing and so on. We designed Nd:YAG laser firmware with smart microcontroller, and want to explain general matters about the firmware from now.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.533-541
• /
• 2014

The streams in Jeju Island have very distinctive hydrological and geological properties and there are a lot of limits in applying the general flood estimation method. This study presented parameters dominant in the Hancheon stream of Jeju Island by analyzing the sensitivity of parameters of HEC-HMS model regarding rainfall events in the target basin, and extracted the optimal parameter(Time of Concentration of Clark Unit Hydrograph: Kraven II method, Storage Coefficient: Sabol method) by analyzing and comparing it with the flood runoff data observed in the site and Jeju Island's observation data.

• Journal of Plant Biology
• /
• 제23권1호
• /
• pp.3-10
• /
• 1980

Effects of thermal effluents on the marine algal communities were investigated with the quadrat method during June, 1977-December, 1978, at the intertidal zone of Kori Nuclear Power Plant, Southeast Coast of Korea. As a result, both the number of algal species occurred in quadrat (50$\times$50cm) and the total coverage were observed to be decreased in June, 1978, at three sites near the discharge point compared with those of previous year but being recovered afterwards. The representative dominant species at the coast of Kori Nuclear Power Plant were, on the whole, Corallina pilulifera, Pachymeniopsis elliptica, and Chondrus ocellatus. Among the species, the coverage of Corallina pilulifera appeared to be rather increased, while the vegetation of Chondria crassicaulis was found to be decreased particularly in 1978. Total 102 species (3 blue-green, 16 green, 30 brown, and 53 red algae) of marine algae were identified in this study. Among them 71 species were common to 133 species reported by previous investigators during 1969-1970.

• 수산해양기술연구
• /
• 제60권1호
• /
• pp.37-46
• /
• 2024

This study was conducted to provide the basic information on environment effects on appearance of ichthyoplankton in the Yeongsan River Estuary in Spring and Summer from 2018 to 2020. Data were obtain from the database of 'Coastal Ecosystem' in "National Survey of Marine Ecosystem." Among the abundance ichthyoplankton species, the Gobiidae spp. dominated, accounting for 85% of the total abundances with the secondary dominant species being the Parablennius yatabei, representing 3% of the abundances. Cluster analysis results revealed a composition differentiated between spring and summer. The Yeongsan River Estuary is known to be significantly influenced by the opening and closing of estuarine gates. In this study, the fluctuation in the number of occurrence groups and abundance among the years and season is attributed to the phenomenon of high water temperature period and the freshwater discharge.

• Ecology and Resilient Infrastructure
• /
• 제9권1호
• /
• pp.68-76
• /
• 2022

본 연구에서는 금강수계 미호천 유역에서 어류 서식지적합도지수 (HSI)를 산정하고 환경생태유량을 산정하였다. 이를 위해 미호천의 상류와 하류를 대표할 수 있는 2개 지점 (St.3과 St.8)을 선정하고, 어종별 수심과 유속 등 물리적서식지 정보를 구축해 서식지적합도지수를 산정하였다. 서식지적합도지수는 채집된 개체수와 유량조사 결과를 수심과 유속의 관계를 이용해 WDFW 방법으로 산정하였고, 대표어종 선정시 우점종인 피라미 (Zacco platypus)와 유량에 민감한 유영성 어종으로 결정하였다. 단일종인 피라미의 경우 수심 범위는 0.1 - 0.5 m, 유속 범위는 0.2 - 0.5 m/s 이고, 유영성 어종인 경우 수심 범위는 0.2 - 0.5 m, 유속 범위는 0.2 - 0.5 m/s 이다. 미호천의 대표지점인 St.3과 St.8에서 대표어종인 유영성군집 및 피라미에 대한 유량 (Discharge)-가중가용면적 (WUA) 관계 곡선 및 서식지적합도 분포를 모의하였다. 미호천 상류 St.3에서 가중가용면적이 최대값을 나타내는 최적유량은 유영성 군집이 4.0 m³/s, 피라미가 2.7 m³/s 로 모의되었다. 하류지점인 St.8에서는 유영성 군집이 8.8 m³/s, 피라미가 7.6 m³/s 로 모의되었다. 두 지점 모두 유영성군집 어종의 최적유량이 크게 산정되었다. 이는 유영성 군집의 서식지적합도지수가 피라미의 서식조건보다 더 빠른 유속을 필요로 하기 때문이다. 최소유량 산정에서도 피라미의 유량이 더 작고, 보다 더 많은 가중가용면적을 제공하는 것으로 평가된다. 군집 어류의 경우 수심과 유속의 범위를 좁게 산정하면 필요유량이 증가하고 가중가용면적은 상대적으로 감소한다. 따라서 군집어류에 대한 서식지적합도지수 산정시 범위를 좁게 설정하는 것보다 모든 어종의 서식지를 포함하는 지수를 산정하는 것이 유리하다.