• Journal of Welding and Joining
• /
• v.17 no.5
• /
• pp.61-68
• /
• 1999

For the last two decades, waveform control techniques have been successively developed and applied for the inverter welding machines resulting in the substantial reduction of spatter generated in CO₂ welding. One of the constituents commonly involved in those techniques is to delay the instant of current increase to some extent after the initiation of short-circuiting. Although this technique has been known to be quite effective in reducing the spatter generation through the suppression of is instantaneous short circuiting, the delay time necessary for minimum spatter has not been clearly understood. In this study, the control system for varying the delay time was constructed so that the spatter generation rates could be measured over a wide range of delay time, 0.29-2.0 msec. As a result of this study, it was demonstrated that spatter generation rate(SGR) sharply decreased at delay time of 0.6 msec and longer accompanied with the change in characteristics of short circuit mode from the instantaneous short-circuiting(ISC) dominant to normal short-circuiting(NSC) dominant. Another feature that have been found in current waveform of over 0.6msec was the creation of current pulse right after the arc reignition stage. Because of this current pulses weld pool oscillated in wave-like fashion and it looks like to play an important role in developing short circuiting between electrode and weld pool.

• East Asian Economic Review
• /
• v.24 no.4
• /
• pp.417-440
• /
• 2020

The coronavirus pandemic of 2019-20 confronted fiscally dominant regimes around the world with the question of whether the large deficits caused by the health crisis should be monetized or financed by issuing debt. The unpleasant monetarist arithmetic of Sargent and Wallace (1981) states that in a fiscally dominant regime tighter money now can cause higher inflation in the future. In spite of the qualifier 'unpleasant,' this result is positive in nature, and, therefore, void of normative content. I analyze conditions under which it is optimal in a welfare sense for the central bank to delay inflation by issuing debt to finance part of the fiscal deficit. The analysis is conducted in the context of a model in which the aforementioned monetarist arithmetic holds, in the sense that if the government finds it optimal to delay inflation, it does so knowing that it would result in higher inflation in the future. The central result of the paper is that delaying inflation is optimal when the fiscal deficit is expected to decline over time.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.1-16
• /
• 1994

In this paper, we propose a new multiple access scheme for VSAT(Very Small Aperture Terminal) data communications. The proposed scheme has better performance in terms of delay throughput than Controlled Multiaccess Scheme which has excellent performance. The proposed scheme use the spare reservation method, adaptation method to offered load, and fixed bandwidth reservation method. In this paper, we analyze the performance using simple queueing model and present the simulation results. When network traffic is very low, the new scheme and the controlled multiaccess scheme have almost the same access delay characteristic. As the network load becomes higher, the new scheme's access delay gain becomes larger. Futhermore, even when the network traffic is very high it is possible to access satellite link within the delay similar to one round-trip delay. In addition to access delay performance enhancement, the new scheme has facility that supports fixed bandwidth reservation. So it shows more enhanced performance in the environment that stream traffic is dominant such as in VSAT communication environment.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.165-176
• /
• 2015

Recently many Korean large-sized construction companies as well as specialty contractors have been expanding their business in the overseas market to mitigate impacts from long-term stagnation in the domestic market. Such as a result, it has been arisen as a major issue that contractors effectively manage the delays which have been commonly faced with in international mega-projects. Therefore it can be said that the ability of the delays management leads a success of project. This paper presents a review of literature for delay analysis methods such as time impact analysis(TIA) and raises practical problems to rationally substantiate the duration of extension of time(EoT) in international mega projects which have wide scope of works as well as complicated and detailed contract baseline programs by taking theoretical approaches. We suggest the two improvement concepts to substantiate the EoT claims which are effectively applicable to practical projects. The first is to sort out dominant delays among numerous delays in advance of applying a delay analysis. The second is to set up the delay sections with the advanced concept for analysing delays' effects by TIA. This study performed a case study on an actual international mega-project. to confirm the effectiveness of improvement concepts that this practical approach is applicable for the assessment of EoT. In conclusion, this paper supposes to provide practitioner in charge for an EoT claim with an advanced substantiation methodogy when they not only analyse the construction delays by using TIA, but also negotiate with stakeholders about with the assessment of EoT.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.640-645
• /
• 2005

Closed-loop model-free optimization of positive feedback time delay controllers for dominant time delay systems is presented. Iterative feedback tuning (IFT) is applied to the tuning of positive feedback time delay controller. Three experiments are carried out to perform the model-free gradient descent optimization. The initial controller parameters and duration in specifying the cost function are suggested. The effects of step size, filter function and time weighting function on the performance of the optimized controlled are given. Simulation and experimental studies are included to demonstrate the effectiveness of the tuning scheme.

• Journal of ILASS-Korea
• /
• v.25 no.3
• /
• pp.119-125
• /
• 2020

In this paper, we used Helmholtz solver based on 3D finite element method to quantitatively analyze the effects of change of gain, time delay and time delay spread, which are the main variables of flame transfer function, on combustion instability in gas turbine combustor. The effects of the variable of flame transfer function on the frequency and growth rate, which are the main results of combustion instability, were analyzed by applying the conventional heat release fluctuation model and modified one considering the time spread. The analysis results showed that the change of gain and time delay in the same resonance mode affected the frequency of the given resonance modes as well as growth rate of the feedback instability, however, the effect of time delay spread was not relatively remarkable, compared with the dominant effect of time delay.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.55-64
• /
• 1989

The effect of discharge have been investigated for condition of spark in a multiple spark ignition engine, as the spark duration, capacitive and inductive discharge energy were calculated for condition of spark by ignition wave and energy formula. The useful portion of spark discharge is divided into capacitance portion and inductance portion. It was found that capacitive discharge energy and spark duration were increased according to increasing number of spark, and inductive discharge energy was increased according to increasing spark interval. Therefore engine torque was increase and lean misfire limit was extended comparing with the standard ignition system. It found that spark energy was discharged within ignition delay period availability acted on the formation and growth of flame kernel, and total spark energy was increased according to increasing number of spark times, but discharged spark energy after ignition delay became unavailable energy. And the capacitive discharge energy has the dominant effect for stoichiomeric or not very rich air-fuel mixture but inductive discharge energy has the dominant effect for lean air-fuel mixture.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.326-333
• /
• 2006

In this study, the vibration waveform of the single hole which is not interfered from the different blasting holes is separated, the each dominant frequency which is determinated through the Fast Fourier Transform(FFT) is measured. Also the separation waveform executed a superposition modeling which changes to delay time from 1ms to 80 ms in 1ms interval and controls the number of blasting holes from 2 holes to 15 holes in order to investigate the effect of PPV according to the duration time of the vibration and the number of blasting holes. As a result of analysis, the longer the duration time of the vibration, the longer the delay time which is not interfered from the different blasting holes and the effect regarding the number of blasting holes from inside identical delay time did not appear a lot.

• Korean System Dynamics Review
• /
• v.5 no.1
• /
• pp.127-142
• /
• 2004

Feedback loop dominance is a key concept to understand structural driving forces of system behavior. In this paper, we propose two kinds of shifts in dominant feedback loops: continuous shifts (CS) and discrete shifts (DS). With the help of questionnaires, we verified three hypotheses regarding cognitive biases in perceiving the shifts in dominant feedback loops: 1) failure in perceiving continuous shifts, 2) tendency of decision making based on discrete shifts, and 3) different perception on the dominant feedback loops between level variables and rate variables. We discussed the implication of these cognitive biases on time delay and timing strategy in decision-making processes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.81-90
• /
• 2004

For deep submicron (DSM) very large scale integrated circuits (VLSI), it is well known that interconnects have become the dominant factor in determining the overall circuit performance. Buffer insertion is an effective technique of interconnect optimization. When a net has an excessive propagation delay, one or more buffers can be inserted to reduce the delay. Buffers also reduce the crosstalk between neighboring wires. While many conventional methods insert buffers net by net. we have developed new techniques in which buffer locations are simultaneously optimized for all nets. This is to avoid the difficulties in finding the right ordering of nets for buffer insertion. since several nets may compete for a buffer location. We also study buffer insertion with multiple fan-out nets to optimize critical path delay. Elmore delay model is used for delay calculation and the number of buffers for each net is determined to optimize the delay.