• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.23-43
• /
• 2021

In this study, we selected two essential oils, Citrus unshiu and Cinnamomum cassia with superior antioxidant effects from the essential oils of 7 wild plants in South Korea and examined their antimicrobial activity against Candida albicans, which causes dermatitis to identify the antimicrobial components in the essential oils. As a result of measuring DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, SC50 value of the Citrus unshiu essential oil was 0.010 mg/mL, while for the Cinnamomum cassia essential oil, SC50 value was 0.09 mg/mL. In addition, when ABTS (2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity was measured, SC50 value of the Citrus unshiu essential oil was 0.09 mg/mL, while for the Cinnamomum cassia essential oil, it was 0.06 mg/mL, exhibiting high antioxidant activity. For the minimum inhibitory concentration (MIC), the essential oil of Cinnamomum cassia was 1.25 mg/mL and that of Citrus unshiu was 5 mg/mL, demonstrating a high antimicrobial activity of the Cinnamomum cassia essential oil. Through the thin layer chromatography (TLC) bioassay, we assessed the antimicrobial activity against C. albicans according to the fraction components of the two essential oils. Also, by using preparative TLC (prep. TLC), we obtained the active fractions, and by performing GC/MS analysis of the components with the same Rf value, we identified the antimicrobial-active components. As a result, the main components having antioxidant and antimicrobial activities were cinnamyl acetate, eucalyptol, linalool, and citral of the Cinnamomum cassia essential oil and linalool from the Citrus unshiu essential oil. Also, based on the analysis of the fractional components that showed antioxidant and antimicrobial activities in both of the two essential oils, it was found that linalool has antioxidant activity, while cinnamyl acetate, eucalyptol, citral, and geranyl acetate have antioxidant and antimicrobial activities.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.42-50
• /
• 2021

Along with the rapid growth of the food service industry, food safety requirements and hygiene are increasing in importance in restaurants and hotels. Accordingly, there is a need for quick and practical monitoring techniques to determine hygiene status in the field. In this study, we investigated 5 domestic 5-star hotels specifically, personal hygiene (hands of workers), cooking utensils (knife, cutting board, food storage container, slicing machine blade, ice-maker scoop) and other facilities (refrigerator handle, sink). In addition, we examined the hygiene management status of customer contact points (tongs for buffet, etc.) to derive the correlation between the ATP values as a, a verification method. As a result of our five-hotel survey, we found that cooking utensils and personal hygiene were relatively sanitary compared to other inspection items (cookware 92.2%, personal hygiene 91.4%, facilities and equipment 76.19%, customer contact items 88.6%). According to our ATP-based mothod, kitchen utensils (51 ± 45 RLU/25㎠) were relatively clean compared to other with facilities and equipment (167 ± 123 RLU/25㎠). In the present study, we also evaluated the usefulness of the ATP bioluminescence method for monitoring surface hygiene at hotel restaurants. After correlation analysis of surveillance of hygienic status points and ATP assay, most results showed negative and high correlation (-0.64--0.89). Our ATP assay (92 ± 67 RLU/25㎠) of each item after cleaning showed signigicantly reduced results compared to the ATP assay (1020 ± 1254 RLU/25㎠) for normal status, thereby indicating its suitability as a tool to verify the validity of cleaning. By our results, ATP bioluminescence could be used as an effective tool for visual numerical evaluation of invisible contaminants.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.29-34
• /
• 2021

Purpose Sample reception environment system in nuclear medicine has not changed much compared to 20 years ago. When preparing sample for in vitro test, there was no significant change because the test was carried out by generating an own specimen from the parent specimen. In this study, We would like to introduce a method that automatically removes the sample cap using the automated decapper equipment and enables automatic reception at the same time. In addition, including a provisional reception system. Materials and Methods In 2019, it was intended to get a device that automatically removes the cap of a patient's blood sample. This equipment is the same as the equipment used in the Department of Laboratory Medicine (Vacuette Ⓡ Unicap Belt Decapper, Greiner bio-one, Austria). However, the purchase was delayed due to differences in tube size, budget, and space. In January 2020, we borrowed domestic automatic decapper equipment and modified it to suit our laboratory environment. After 9 months, we were able to introduce a system that automatically removes the lid of a patient's blood sample and at the same time automatically accepts the test. And, through the provisional reception system, it was possible to know the arrival of the specimen in a short time. Results With the use of an automatic decapper device, the sample cap was automatically removed, and the reception proceeded at the same time. So, it was very efficient at work because it shortened the sample preparation time by about 20 minutes. In addition, it was possible to prevent the examiner's musculoskeletal disorders caused by repeated wrist use. After using the provisional reception system, patients were able to be discharged quickly, and the number of phone calls to confirm the arrival of samples was reduced. Conclusion Most hospitals have about four employees in the nuclear medicine in vitro laboratory. It is effective to use automatic decapper equipment and a provisional reception system for organizations that perform work with the minimum number of personnel.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.115-125
• /
• 2022

The purpose of this study was to examine the effect of packaging on quality maintenance of paprika (Capsicum annuum L. cv. Nagano RZ) stored at three different temperatures. In Korea, paprika is stored and distributed under ambient conditions. To ensure the freshness maintenance, determining optimal storage temperature is necessary. Paprika were unpacked (control) or packed with polyamide film and stored at 5℃, 10℃ and 20℃ for 35 days. Quality characteristics such as weight loss and appearance were examined. Paprika packed with polyamide film showed less quality changes compared to unpacked paprika under all the storage temperatures. The commercial properties tended to decrease rapidly during storage at 20℃ regardless of packing. The degree of weight loss was significantly lower in packed paprika compared to unpacked paprika. It was found that soluble solids, pigments, hardness, etc. were complexly affected by storage temperature and film packaging. For paprika, the storage temperature of 5℃ or 10℃ was effective in maintaining freshness; paprika packed in polyamide film packing maintained greater freshness than unpacked paprika. Our results showed that, packaging is required to preserve the freshness and to improve the marketability of paprika in the domestic market. It seems that it is necessary to continuously search for an effective packaging method.

• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.185-200
• /
• 2022

The risk of various hazardous substances in aquatic environment comprises not only the concentration of substances in the environmental medium but also their accumulation in fish through complex food web and the health risks to humans through the fish. In Korea, the monitoring of residual toxicant in aquatic ecosystems began in 2016 following the enforcement of the Acts on registration and evaluation for the management of chemicals used in daily life (consumer chemical products), and attention has been paid to potentially hazardous substances attributed to them. Recently, studies have been carried out to investigate the distribution of these hazardous substances in the ecosystem and calculate their emission factors. These include the accumulation and transport of substances, such as detergents, dyes, fragrances, cosmetics, and disinfectants, within trophic levels. This study summarizes the results of recently published research on the inflow and distribution of hazardous substances from consumer chemical products to the aquatic environment and presents the scientific implication. Based on studies on aquatic environment monitoring techniques, this study suggests research directions for monitoring the residual concentration and distribution of harmful chemical substances in aquatic ecosystems. In particular, this study introduces the directions for research on trophic position analysis using compound specific isotope analysis and trophic magnification factors, which are needed to fulfill the contemporary requirements of selecting target fish based on the survey of major fish that inhabit domestic waters and assessment of associated health risk. In addition, this study provides suggestions for future biota monitoring and chemical research in Korea.

• Atmosphere
• /
• v.33 no.2
• /
• pp.223-246
• /
• 2023

This paper summarized the research papers on weather extremes that occurred in the Republic of Korea, which were published in the domestic and foreign journals during 1963~2022. Weather extreme is defined as a weather phenomenon that causes serious casualty and property loss; here, it includes typhoon, heavy rain, drought, heat wave, cold surge, heavy snow, and strong gust. Based on the 2011~2020 statistics in Korea, above 80% of property loss due to all natural disasters were caused by typhoons and heavy rainfalls. However, the impact of the other weather extremes can be underestimated rather than we have actually experienced; the property loss caused by the other extremes is hard to be quantitatively counted. Particularly, as global warming becomes serious, the influence of drought and heat wave has been increasing. The damages caused by cold surges, heavy snow, and strong gust occurred over relatively local areas on short-term time scales compared to other weather hazards. In particularly, strong gust accompanied with drought may result in severe forest fires over mountainous regions. We hope that the present review paper may remind us of the importance of weather extremes that directly affect our lives.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.1-16
• /
• 2023

As the Intergovernmental Panel on Climate Change (IPCC) emphasized the transition to a carbon-neutral society globally by 205 0, major countries such as Korea, Japan, and Europe declared carbon-neutral goals. The agricultural sector is a carbon-absorbing sector, and its importance has increased as the General Assembly of the Parties to the Climate Change Convention (COP 26) held in the UK in November 2021 emphasized the role of agriculture to discuss climate change. However, GHG reduction projects in the agricultural sector are not properly monitored considering the domestic situation, and a system for quantitative evaluation of the effectiveness or basis of implementing the project program is not in place. Therefore, a priori study is needed to understand the current status of existing policies and to review matters that need to be improved in order to facilitate policy design, implementation, and monitoring for GHG reduction in the agricultural sector. The purpose of this study is to examine the opinions of stakeholders by applying a semi-structured interview method to diagnose the current status of Korea's GHG reduction policy in the agricultural sector and identify factors that hinder policy implementation. As a result of the semi-structured interview, this study presented factors that hinder the promotion of GHG reduction policies in the agricultural sector according to four types of data and technology, finance, institutions, and perceptions. Some stakeholders also stressed that the pilot project could be helpful as a way to comprehensively consider the implications of this study, such as securing technology data, establishing a system for verifying effectiveness, and providing incentives and promoting them. Rather than drawing specific conclusions, this study is an exploratory study that diagnoses and reviews the progress of GHG reduction policies, and it can be used as useful basic data if it secures enough interview respondents and balances the number of samples by group.

• Korea Science and Art Forum
• /
• v.31
• /
• pp.21-32
• /
• 2017

Local festivals form the regional cultures and atmosphere of communication; they increase the demand of domestic tourism businesses and thus, have an important role in ripple effects (e.g. regional image improvement, tourist influx, job creation, regional contents development, and local product sales) and economic revitalization. IoT (Internet of Thing) technologies have been developed especially, beacon-one of the IoT services has been applied as plenty of types and forms both domestically and internationally. However, notwithstanding expansion of current digital mobile technologies, it still remains as difficult for the individual to track the information about all the local festivals and to fulfill the tourists' needs of enjoying festivals given the weak strategic approaches and advertisement activities. Furthermore, current festival-related mobile applications don't function well as delivering information and have numerous contents issues (e.g. ways of information delivery within the festival places, independent application usage for each festival, one time usage due to one time event). This research, based on the background mentioned above, aims to develop the local festival mobile application and data analysis system applying beacon technology. First of all, three algorithms were developed, namely, 'festival crowding algorithm', 'visitor stats algorithm', and 'customized information algorithm', and then beta test was followed with the developed application and data analysis system. As a result, they could form the database of visitors' types and behaviors, and provide functions and services, such as personalized information, waiting time for festival contents, and 'hot place' function. Besides, in Google Play store, they also got the titles given with more than 13,000 downloads within first three months and as the most exposed application related with festivals; and, thus, got credited with their marketability and excellence. This research follows this order: chapter 2 shows the literature review of local festival related with technology development, beacon service, and festival application. In Chapter 3, design plans and conditions are described of developing local festival mobile application and data analysis system with beacon. Chapter 4 evaluates the results of the beta performance test to verify applicability of the developed application and data analysis system, and lastly, chapter 5 explains the conclusion and suggests the future research.

• Trans-
• /
• v.15
• /
• pp.25-56
• /
• 2023

VR is a dynamic image simulation technology with very high information density. Among them, spatial depth, temporality, and realism bring an unprecedented sense of immersion to the experience. However, due to its high information density, the information contained in it is very easy to be manipulated, creating an illusion of objectivity. Users need guidance to help them interpret the high density of dynamic image information. Just like setting up navigation interfaces and interactivity in games, interactivity in virtual reality is a way to interpret virtual content. At present, domestic research on VR content is mainly focused on technology exploration and visual aesthetic experience. However, there is still a lack of research on interactive storytelling design, which is an important part of VR content creation. In order to explore a better interactive storytelling model in virtual reality content, this paper analyzes the interactive storytelling features of the VR animated version of <Wolves in the walls> through the methods of literature review and case study. We find that the following rules can be followed when creating VR content: 1. the VR environment should fully utilize the advantages of free movement for users, and users should not be viewed as mere observers. The user's sense of presence should be fully considered when designing interaction modules. Break down the "fourth wall" to encourage audience interaction in the virtual reality environment, and make the hot media of VR "cool". 2.Provide developer-driven narrative in the early stages of the work so that users are not confused about the ambiguous world situation when they first enter a virtual environment with a high degree of freedom. 1.Unlike some games that guide users through text, you can guide them through a more natural interactive approach that adds natural dialog between the user and story characters (NPC). Also, since gaze guidance is an important part of story progression, you should set up spatial scene user gaze guidance elements within it. For example, you can provide eye-following cues, motion cues, language cues, and more. By analyzing the interactive storytelling features and innovations of the VR animation <Wolves in the walls>, I hope to summarize the main elements of interactive storytelling from its content. Based on this, I hope to explore how to better showcase interactive storytelling in virtual reality content and provide thoughts on future VR content creation.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.386-394
• /
• 2019

Rehmannia glutinosa, one of the major medicinal crops in Korea, can be classified into three types: fresh, dried and prepared Rehmannia root. In this study, the quality characteristics of prepared rehmannia root were evaluated using four different cultivars that are commonly used in the market. In making prepared rehmannia root, roots of Jihwang 1, Kokang, Togang, and Dagang were dried, soaked in rice wine, and steamed nine times. At each stage, physiochemical properties were analyzed, including yield, which is one of the most important industrial factors to consider. The yield was the highest in Togang at 23.61% and the lowest in Dagang at 21.16%. These yield values showed a highly negative correlation with the moisture content of roots. The fructose and glucose contents were increased during the 3^rd, 4^th and 5^th steaming but then decreased. The sucrose, raffinose, and stachyose content gradually decreased during the first three steaming and were not detected during the 4^th steaming. Additionally, the catalpol content was not detected after the 4^th steaming. On the contrary, the 5-hydroxymethylfurfural content was not detected in the raw root but increased during the steaming. Jihwang1 and Togang exceeded the 0.1% Korean Pharmacopoeia standard after the 5^th steaming, reaching it faster than did the other cultivars. Overall, Togang was the optimal cultivar considering the overall characteristics of its high yield and short steaming time. These results could provide useful information for the industrial use of prepared Rehmannia root based on the requirements and characteristics of each cultivar.