• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.32-40
• /
• 2017

The current status of Performance-Based Design (PBD) implemented in 4 wide areas (Seoul, Gyeonggi, Incheon and Busan) over the past 5 years was reviewed with regard to the number of PBD implementation and target buildings. Then, detailed status related to fire scenarios, input information for fire simulation, and grid size were analyzed with the pre-review for the PBD. As a result, the domestic PBD was mainly applied to the mixed occupancy. In the fire simulations performed on the identical fire scenario and fire space, the maximum heat release rate (HRR) varied significantly depending on the PBD designer. Various combustibles were also considered for the identical fire source, and their combustion properties also showed considerable uncertainty. In addition, the applicability of accurate input information for predictive models of heat and smoke detectors was examined. Finally, the average grid size for the fire simulation using Fire Dynamics Simulator (FDS) was analyzed, and the improvement of PBD to minimize designer dependency was proposed.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.207-215
• /
• 2015

Safety' can be used in a variety of ways and may also have different meanings when used in theoretical field and routinely used. In this paper, the 'safety' means that human injury, fire or physical accident condition does not occur while used by the end-user. The meaning of safety may be different by era and culture. Even in contemporary era, the meaning can be used differently by country, region and culture. As the rights of consumers are increasingly reinforced, we can expect the acceptable risk or safety level can rise higher. In this paper, the R-map of Japan and the European risk assessment guidelines (RAPEX) were reviewed considering domestic incidents database status and its applicability. Because it is difficult to make a model based on a R-map, a revised model was developed mainly based on European Assessment Model with a combination of the important characteristics of Japan model R-map. Also utilizing this revised model, the availability as a new risk assessment model was confirmed by comparing the test results for the same scenarios to the other risk assessment model (RAPEX/RAG).

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.42-54
• /
• 2023

Mobile scaffold is used as a work platform in construction sites. According to industrial accident data, 10 fatalities occur annually on average due to falling from mobile scaffold in construction sites. To prevent such fatal accidents, safety standards must be improved by analyzing the causes of fatal accidents related to mobile scaffold. Accordingly, we analyzed domestic and international safety standards for mobile scaffold and analyzed the fatalities (117 persons) caused by mobile scaffold accidents in domestic construction sites during 2011-2020 and found that fall, overturn, and collapse accounted for 88% (103 persons), 10.3% (12 persons), and 1.7% (2 persons) of fatalities, respectively. The main causes of fatal accidents were found to be non-installation or insufficient installation of safety rails and outriggers and incorrect sequence of work. Based on the analysis results, we proposed strategies for improving the safety standards, such as the use of advanced guard rails and wheel-attached outriggers, to enhance the safety and field applicability of the mobile scaffold. Technology development and improvements in the safety standards for the use of mobile scaffold will aid in the prevention of fatal accidents caused by mobile scaffold.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.201-221
• /
• 2022

This study aims to analyze a harmonious approach between trade norms for the protection of human rights and the WTO agreements is increasingly necessary and important. conflicts and harmonization that may occur between major human rights protection trade norms and WTO agreements were comprehensively reviewed. The hard legalization of corporate social responsibility for sustainable development, such as human rights protection, was in conflict with the WTO Agreement, which was based on the principle of non-discrimination. As the currently expanding human rights protection trade norms reflect differences in the positions of developed and developing countries, it was also pointed out that there may be disputes over WTO compatibility and distorted protectionism measures. Accordingly, the applicability of the general exceptions to Article 20 of the GATT were reviewed together, and Article 20(a) of GATT, "necessary to protect public morals" may differ between developed and developing countries, and thus limitations were also considered. At the same time, When it is necessary to take regulatory measures such as prohibition of imports from a specific country for human rights protection, it was reviewed and proposed domestic trade norms revision.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.3
• /
• pp.387-415
• /
• 2015

In this study, we have proposed an estimation model of domestic market size using the linking between standard statistical classification systems, and reviewed the practical applicability of the model. The results of the mining and manufacturing survey of Statistics Korea conducted on the basis of KSIC (Korea Standard Industrial Classification) and Korea trade statistics based on HS (The Harmonized Commodity Description and Coding System; Harmonized System) classification were linked for the model by using the correspondence tables provided by Statistics Korea and United Nations Statistics Division. The most serious problem to adopt the integrated KSIC-ISIC-HS correspondence table for the estimation of domestic market size is the complex multiple linkages among KSIC and HS codes. In this study, we have suggested the method to divide the amount of trade corresponding to the HS codes linked to more than two ISIC codes based on the ratio of shipments corresponding to the ISIC codes as the weight. Then, it is possible to analyze the domestic market size of 125 ISIC codes in the manufacturing industry and to forecast the market size in the near future by using the model. Although the model has some limitations such as the difficulty in analysis on more subdivided items than ISIC items, the impossibility of the analysis on items in industries except for manufacturing, errors in the shipment due to some missing data, this study has significance in the sense that it provided the analysis method of domestic market size by using the most objective, reliable and sustainably useful data.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.120-130
• /
• 2016

Considering the applicability of Kuz-Ram model, which has been used extensively for predicting rock fragmentation size distribution by blasting, to domestic open-pit limestone mine, a total of 21 blasting tests have been executed at an open-pit limestone mine in eastern Gangwon of South Korea. A comparative analysis of field measured value and Kuz-Ram predicted value showed that there are a considerable amount of error in the predicted values regardless of application of various correction parameters for rock factor and uniformity factor; up to 56.45% in mean fragmentation size and 37.52% in uniformity index. Also the problem of applying different correction parameters has been derived even though a similar blasting pattern has been adopted for a same blasting bench. The authors therefore suggest that Kuz-Ram model needs to be modified for a proper application to domestic open-pit limestone mine.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.1
• /
• pp.55-65
• /
• 2018

It is necessary to develop a mobile water production system in order to provide stable water supply in case of disasters such as floods or earthquakes. In this study, we developed a modular mobile water production system capable of producing water for various uses such as domestic water and drinking water while improving applicability in various raw water sources. The water production system consists of three stages of filtration (sand filtration - activated carbon filtration - pressure filtration) to produce domestic water and an additional reverse osmosis process to produce drinking water. In laboratory and field experiments, the domestic water production system showed excellent treatment efficiency for particulate matter, but showed limitations in the treatment of dissolved substances such as dissolved organic matter. In addition, ultraviolet irradiation was considered as additional disinfection step, because it does not form precipitates of manganese oxides after disinfection. Reverse osmosis process was added to increase the removal efficiency of dissolved substances and the treated water satisfied drinking water quality standards. Fluorescence analysis of dissolved organic matter showed that the fulvic acid-like substances in raw water was successfully removed in the reverse osmosis process. The mobile water production system developed in this study is expected to be used not only in water supply in case of disaster, but also widely used in islands and rural area.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.547-559
• /
• 2012

The concrete structural design in domestic has based on the allowable stress design (ASD) method and ultimate strength design (USD) method. Recently limit state design (LSD) method has issued and attempted to adopt in geotechnical design. Because ASD method and USD method have restriction in economic design. In this study, the generated member forces were calculated about high strength concrete segment lining based on japanese LSD code. And it compared with domestic USD code for identifying the economic design possibility of LSD and domestic applicability. In analysis results, the aspect of moment had generated similarly each other but the member forces of japanese LSD code were decreased (26.0% of moment and 26.7% of shear force) comparing with USD method. For that reason, possibility of economic segment design with stable condition were identified.

• Tunnel and Underground Space
• /
• v.29 no.2
• /
• pp.108-123
• /
• 2019

In recent years, as safety management in underground mines has become more important in the worldwide, mine safety management technologies combining information communication technology such as real-time worker position tracking, monitoring system and equipment remote control have been developed. Wireless communication system is mainly applied to these technologies for the flexibility of network configuration. There are some cases the monitoring system was installed in domestic underground mines, but, it is necessary to develop the technology more suitable for domestic mining standard. In this study, we developed the real-time environmental monitoring system using ZigBee technology and examined the result of application to domestic limestone mine. Furthermore, applicability of the developed environment monitoring system to $VentSim^{TM}$ LiveView was checked. This study is expected to contribute to the related studies like the optimization of the ventilation system in underground mines.

• Journal of Korea Trade
• /
• v.26 no.5
• /
• pp.106-124
• /
• 2022

Purpose - The increasing share of Korean private label products (PLPs) in the domestic market helped generate lucrative revenue. In recent years, major South Korean retailers have begun to cast their sights on overseas markets and actively export their PLPs. In China, the proportion of private label fresh food (PLFF) is gradually expanding amid the development of the new retailing model. A profound understanding of the relationship between private label fresh produce and purchase intention may be the answer to helping Chinese retailer private labels expand supply chains in Korea. This study, taking Chinese retailers as an example, examines the impacts of selection factors of private label fresh food and perceived value on purchase intention. Apart from that, the relationship between the selection factors and purchase intention will be analyzed with perceived value as a mediator. Design/methodology - This work aims to empirically analyze the purchase intention of private label fresh food using statistical analysis. In this study, a hypothetical causal model consisting of 6 latent variables and 24 measured variables is developed based on the literature review. To validate the research hypotheses and the research model, SPSS23.0/AMOS23.0 is used to analyze factors such as validity and reliability, as well as structural equation modeling. Findings - The hypothetical model established in this study is of general applicability. In respect to PLFF, perceived value, while significantly influencing purchase intention in combination with four selection factors (perceived quality, perceived price, brand trust, and store image), mediates partially between the first three factors and purchase intention, which rules out the impact and mediating effect of store image on purchase intention. Originality/value - These research results, as helpful insights into the present circumstances of Chinese PLFF in the domestic market, provide useful information and guidance for Korean retailers and service providers to innovate production and service, as well as develop marketing and promotion strategies, so that they can shift private label goods with advantages from domestic demand to export, thus increasing overseas profitability. Further, this work will also contribute to relevant research.