• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.775-780
• /
• 2016

본 논문에서는 비선형 다물체 동역학 해석에 적용 가능한 구조해석을 개발하였다. 비선형 구조 해석을 위해 Co-rotational 이론 기반의 유한요소를 개발하였다. 그리고 국부 Lagrange 승수를 활용한 영역분할해석 기법을 적용하여 대용량/다물체 해석이 가능한 구조해석 알고리듬을 개발하였다. 기 개발한 구조 해석은 외팔보 및 다물체 구조에 대한 비선형 정적 해석 예제에 적용하였다. 병렬 계산에 따른 성능 평가는 희박행렬 계산 라이브러리인 PARDISO와 비교하였다. 이를 통해 기 개발 구조해석의 계산 속도 향상을 확인하였다.

• 융합신호처리학회논문지
• /
• 제16권4호
• /
• pp.122-128
• /
• 2015

멀티미디어 정보들이 인터넷 공간에 확산됨에 따라서 원래 정보 소유자의 권리 보호와 원본 증명 등의 문제가 대두되고 있다. DCT, DFT, DWT 등의 여러 영상 변환들을 이용하여 소유권의 징표로 워터마크를 원본 영상에 삽입하는 방법을 많이 사용하였으나, 보다 최근에는 수치해석 분야에 많이 쓰이는 SVD(Singular Value Decomposition) 방법을 부가적으로 사용하고 있다. 본 논문에서는 SVD의 특이 벡터와 동시에 Gabor 코사인과 사인 변환을 이용하여 디지털 표지 영상에 워터마크를 삽입하고 추출하는 방법을 제안한다. 워터마크가 삽입된 영상에 잡음, 공간 변형, 필터링, 압축 등의 공격을 가한 후, GCST-SVD의 워터마크 추출 알고리즘을 적용한다. 워터마킹 성능을 평가하기 위해서 삽입한 워터마크와 추출한 워터마크 사이의 유사성 척도로써 정규화한 상관계수값을 측정한다. 또한 추출한 워터마크 영상으로부터 시각적으로 직접 원본 워터마크인지를 판단한다. 가장 낮은 수직 교류 주파수 대역에 워터마크를 삽입한 실험으로부터 SVD의 특이 벡터를 이용한 워터마킹 방법은 대부분 공격에서 0.9이상의 큰 상관값과 삽입한 워터마크의 특징들을 시각적으로 파악할 수 있었다.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.631-639
• /
• 2019

Finite element analysis is one of the important methods to study the structural performance. Due to the simplification, discretization and error of structural parameters, numerical model errors always exist. Besides, structural characteristics may also change because of material aging, structural damage, etc., making the initial finite element model cannot simulate the operational response of the structure accurately. Based on Bayesian methods, the initial model can be updated to obtain a more accurate numerical model. This paper presents the work on the field test, modal identification and model updating of a Chinese reinforced concrete pagoda. Based on the ambient vibration test, the acceleration response of the structure under operational environment was collected. The first six translational modes of the structure were identified by the enhanced frequency domain decomposition method. The initial finite element model of the pagoda was established, and the elastic modulus of columns, beams and slabs were selected as model parameters to be updated. Assuming the error between the measured mode and the calculated one follows a Gaussian distribution, the posterior probability density function (PDF) of the parameter to be updated is obtained and the uncertainty is quantitatively evaluated based on the Bayesian statistical theory and the Metropolis-Hastings algorithm, and then the optimal values of model parameters can be obtained. The results show that the difference between the calculated frequency of the finite element model and the measured one is reduced, and the modal correlation of the mode shape is improved. The updated numerical model can be used to evaluate the safety of the structure as a benchmark model for structural health monitoring (SHM).

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.461-480
• /
• 2010

This paper analyses the data collected from the $2^{nd}$ Jindo Bridge, a cable-stayed bridge in Korea that is a structural health monitoring (SHM) international test bed for advanced wireless smart sensors network (WSSN) technology. The SHM system consists of a total of 70 wireless smart sensor nodes deployed underneath of the deck, on the pylons, and on the cables to capture the vibration of the bridge excited by traffic and environmental loadings. Analysis of the data is performed in both the time and frequency domains. Modal properties of the bridge are identified using the frequency domain decomposition and the stochastic subspace identification methods based on the output-only measurements, and the results are compared with those obtained from a detailed finite element model. Tension forces for the 10 instrumented stay cables are also estimated from the ambient acceleration data and compared both with those from the initial design and with those obtained during two previous regular inspections. The results of the data analyses demonstrate that the WSSN-based SHM system performs effectively for this cable-stayed bridge, giving direct access to the physical status of the bridge.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.561-578
• /
• 2010

This study proposes a multi-level damage localization strategy to achieve an effective damage detection system for civil infrastructure systems based on wireless sensors. The proposed system is designed for use of distributed computation in a wireless sensor network (WSN). Modal identification is achieved using the frequency-domain decomposition (FDD) method and the peak-picking technique. The ASH (angle-between-string-and-horizon) and AS (axial strain) flexibility-based methods are employed for identifying and localizing damage. Fundamentally, the multi-level damage localization strategy does not activate all of the sensor nodes in the network at once. Instead, relatively few sensors are used to perform coarse-grained damage localization; if damage is detected, only those sensors in the potentially damaged regions are incrementally added to the network to perform finer-grained damage localization. In this way, many nodes are able to remain asleep for part or all of the multi-level interrogations, and thus the total energy cost is reduced considerably. In addition, a novel distributed computing strategy is also proposed to reduce the energy consumed in a sensor node, which distributes modal identification and damage detection tasks across a WSN and only allows small amount of useful intermediate results to be transmitted wirelessly. Computations are first performed on each leaf node independently, and the aggregated information is transmitted to one cluster head in each cluster. A second stage of computations are performed on each cluster head, and the identified operational deflection shapes and natural frequencies are transmitted to the base station of the WSN. The damage indicators are extracted at the base station. The proposed strategy yields a WSN-based SHM system which can effectively and automatically identify and localize damage, and is efficient in energy usage. The proposed strategy is validated using two illustrative numerical simulations and experimental validation is performed using a cantilevered beam.

• 한국정보전자통신기술학회논문지
• /
• 제15권3호
• /
• pp.211-216
• /
• 2022

스테가노그래피 기술은 커버 매체의 특정 위치에 비밀 메시지를 대체시켜 숨겨진 정보의 존재를 추적할 수 없도록 보호 조치를 한다. 암호화와 스테가노그래피를 기반으로 다양한 복합적인 방법을 적용하여 보안성과 저항성을 강화한다. 특히 보안성을 향상시키기 위해 혼돈과 무작위성을 높이는 기법이 필요하다. 실제로 이산코사인변환(DCT)과 최하위 비트(LSB) 기반에서 셔플링 방식이 적용된 경우는 연구가 진행되어야 할 영역이다. 메시지 숨김의 복잡성을 추가할 수 있는 비트 정보 셔플링 방식을 통합하고, 공간 영역 기법을 스테가노그래피에 적용하여 한글 메시지의 비트 정보를 은닉하는 새로운 접근 방법을 제시한다. 메시지를 추출할 때 역셔플링을 적용한다. 이 논문에서, 삽입하려는 한글 메시지를 초성, 중성, 종성으로 분리한다. 대응된 정보에 기반한 선택적 셔플링 과정을 적용하여 보안성과 혼돈성을 향상시킨다. 제안된 방법의 성능을 확인하기 위해 상관계수와 PSNR을 이용하였다. 기준값과 비교했을 때 제안한 방법의 PSNR 값이 타당하다는 것을 확인하였다.

• 한국지진공학회논문집
• /
• 제14권3호
• /
• pp.23-30
• /
• 2010

원자력발전소에 설치되는 안전관련 캐비닛형 전기기기는 설치 전에 내진검증이 요구된다. 전기기기의 동특성분석은 내진 검증에 포함된 중요한 과정이며, 기기의 정확한 해석모델을 작성하기 위해서도 필수적으로 요구되는 업무이다. 이 연구에서는 입력진동수준에 따른 기기의 동특성 변화를 분석하기 위하여 원전 지진감시시스템 캐비닛을 대상으로 진동대시험을 수행하고, 입력진동운동의 수준별로 계측된 진동응답신호를 진동수영역분해법으로 분석하였다. 분석결과, 대상기기는 입력진동수준의 크기에 따라 동특성이 비선형적으로 변화하고, 국내 원전의 안전정지지진 수준 이하의 진동에서도 동특성이 비선형적 거동을 보이고 있음을 확인하였다. 이러한 입력진동 수준에 따라 전기기기의 동특성이 비선형적으로 변하는 원인은 대상기기의 특성과 입력진동수준을 고려할 때 일반적인 재료 비선형보다는 각 부품들의 마찰력과 기하학적인 비선형성에 기인하는 것으로 판단된다. 따라서 전기 캐비닛의 입력진동수준에 따른 동특성의 비선형적 변화는 향후 안전관련 기기의 내진검증 업무에서 중요하게 검토되어야 할 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제26권6호
• /
• pp.423-430
• /
• 2013

본 연구에서는 탄소나노튜브와 폴리프로필렌 기지 간 계면결합력과 나노튜브의 국부적 응집에 따른 나노복합재의 탄소성 거동 변화에 대한 파라메트릭 연구를 수행한다. 나노복합재의 탄소성 거동 예측을 위해 분자동역학 전산모사를 수행하고, 분자동역학 결과와 Mori-Tanaka 모델을 적용한 비선형 미시역학 모델을 연계하여 나노복합재 내 흡착계면의 탄소성 거동을 역으로 도출하는 2단계 영역분할 기법을 적용하였다. 미시역학 모델에서는 시컨트 계수방법을 Mori-Tanaka 모델에 적용하여 나노복합재의 비선형 거동을 예측하는 방법을 적용하였으며, 나노튜브와 기지 간 재료계면의 불완전 결합을 고려하기 위해 변위 불연속 조건을 적용하였다. 흡착영역을 고려한 미시역학 모델을 통해 흡착계면의 유무 및 재료계면 결합력 변화 그리고 나노튜브의 국부적 응집현상에 따른 나노복합재의 응력-변형률 관계를 예측하였다. 그 결과 나노튜브의 국부적 응집이 나노복합재의 강화효과를 저하시키는 가장 중요한 변수임을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.17-18
• /
• 2011

Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.