• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1002-1011
• /
• 2013

This paper proposes the new adaptive protection algorithm for inverse-time overcurrent relays (OCRs) to ensure their proper operating time and protective coordination. The application of the proposed algorithm requires digital protection relays with microcontroller and memory. The operating parameters of digital OCRs are adjusted based on the available data whenever system conditions (system with distributed generation (DG)) vary. Moreover, it can reduce the calculation time required to determine the operating parameters for achieving its purpose. To verify its effectiveness, several case studies are performed in time-domain simulation. The results show that the proposed adaptive protection algorithm can keep the proper operating time and provide the protective coordination time interval with fast response.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.270-277
• /
• 2003

In two dimensional mechanical design analysis, quadrilateral element mesh is preferred because it provides more accurate result than triangular element mesh. However, automation of quadrilateral element mesh generation is much more complex because of its geometrical complexities. In this study, an automatic quadrilateral element mesh generation algorithm based on the boundary normal offsetting method and the boundary decomposition method is developed. In so doing, nodes are automatically placed using the boundary normal offsetting method and the decomposition method is applied to decompose the designed domain into a set of convex subdomains. The generated elements are improved by relocation of the existing nodes based on the four criteria - uniformity, aspect ratio, skewness and taper degree. The developed algorithm requires minimal user inputs such as boundary data and the distance between nodes.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.35-44
• /
• 2009

본 논문에서는 대규모 3차원 구조해석에 필요한 병렬 유한요소해석을 위한 영역분할법의 적용에 대해 묘사하였다. 영역분할법을 사용한 병렬 유한요소법 시스템을 개발하였다. 절점 생성시, 절점들간의 거리가 특정절점에서의 공간함수와 같아지면 절점이 생성되어 진다. 이 절점공간함수는 퍼지지식처리에 의해 조절되어 진다. 기본적인 요소생성은 데로우니 삼각화 기법을 적용하였다. 자동요소생성 시스템을 이용한 영역분할법은 3차원 해석에 큰 도움이 된다. 공간함수와 유사하게 절점들간의 유한요소해석을 위한 병렬 수치 알고리즘으로서 영역분할법을 전체의 해석영역을 완전히 여러 개의 작은 영역으로 겹치지 않게 나누는 공역구배인 반복적 솔버와 결합시켰다. 개발된 시스템의 효용성에 대한 성능을 몇 가지 예를 통해 제시하였다.

• 한국소음진동공학회논문집
• /
• 제19권7호
• /
• pp.719-725
• /
• 2009

An efficient time-domain numerical method for the analysis of broadband noise generation and propagation due to turbulence-cascade interaction is developed. The core algorithm of the present method is based on the B-periodicity of the acoustic response function of the flat-airfoil cascade to the ingesting gust(B denotes the number of airfoils in the cascade). To confirm this periodicity, gust-cascade interaction problem are solved by using the time-domain method, which shows that the incident gust with the circumferential mode number having the same remainders when divided by the airfoil number excites the same acoustic response of the cascade. Using the proposed fast algorithm with this periodicity, we show that the total computation time for the model broadband problem using the total 525 incident gust modes can be reduced to about 1/4 of that taken in using the previous time-domain program.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.477-482
• /
• 2009

An efficient time-domain numerical method for the analysis of broadband noise generation and propagation due to turbulence-cascade interaction is developed. The core algorithm of the present method is based on the B-periodicity of the acoustic response function of the flat-airfoil cascade to the ingesting gust (B denotes the number of airfoils in the cascade). To confirm this periodicity, gust-cascade interaction problem are solved by using the time-domain method, which shows that the incident gust with the circumferential mode number having the same remainders when divided by the airfoil number excites the same acoustic response of the cascade. Using the proposed fast algorithm with this periodicity, we show that the total computation time for the model broadband problem using the total 525 incident gust modes can be reduced to about 1/4 of that taken in using the previous time-domain program.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.61-66
• /
• 2003

An excellent mesh construction is of Importance in yielding good results of finite element analysis. The new mesh generation algorithm, which offsets boundaries inward, was developed on the basis of a looping method. An user interface technique and automatic splitting lines which both divide a given domain into subdomains manually or automatically, were used. In addition, the separation method has advantages to prevent the large scale of element size and to control numbers of nodes and elements. This new mesh generation algorithm was proved in practice.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.75-78
• /
• 2004

A mesh generation algorithm adapted to the mesh density map using the Delaunay mesh generation technique is developed. In the finite element analyses of the forging processes, the numerical error increases as the process goes on because of discrete property of the finite elements or severe distortion of elements. Especially, in the region where stresses and strains are concentrated, the numerical discretization error will be highly increased. However, it is too time consuming to use a uniformly fine mesh in the whole domain to reduce the expected numerical error. Therefore, it is necessary to construct locally refined mesh at the region where the error is concentrated such as at the die corner. In this study, the point insertion algorithm is used and the mesh size is controlled by moving nodes to optimized positions according to a mesh density map constructed with a posteriori error estimation. An optimization technique is adopted to obtain a good position of nodes. And optimized smoothing techniques are also adopted to have smooth distribution of the mesh and improve the mesh element quality.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.263-267
• /
• 2006

The path of a flapping airfoil during upstroke and down-stroke is optimized for maximum thrust and propulsive efficiency. The periodic flapping motion in combined pitch and plunge is described using Non-Uniform B-Splines(NURBS). A gradient based algorithm is employed for optimization of the NURBS parameters. Unsteady, low speed laminar flows are computed using a Navier-Stokes solver in a parallel computing environment based on domain decomposition. It is shown that the thrust generation is significantly improved in comparison to the sinusoidal flapping motion. For a high thrust generation, the airfoil stays at a high effective angle of attack for short durations.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.110-118
• /
• 2001

In many areas of finite element analysis, elements with special properties are required to achieve maximal accuracy. As examples, we may mention infinite elements for the representation of spatial domain that extend to special and singular elements for modeling point and line singularities engendered by geomeric features such as reentrant corners and cracks. In this paper, we study on modified shape function representing singular properties and algorigthm for the pollution adaptive mesh generation. We will also show that the modified shape function reduces pollution error and local error.

• 융합보안논문지
• /
• 제23권5호
• /
• pp.65-72
• /
• 2023

본 논문에서는 LSTM(Long Short-Term Memory)을 기반으로 하는 Deep Learning 모델을 구축하여 인간의 습관적 특성을 고려한 악성 도메인 탐지 방법을 제시한다. DGA(Domain Generation Algorithm) 악성 도메인은 인간의 습관적인 실수를 악용하여 심각한 보안 위협을 초래한다. 타이포스쿼팅을 통한 악성 도메인의 변화와 은폐 기술에 신속히 대응하고, 정확하게 탐지하여 보안 위협을 최소화하는 것이 목표이다. LSTM 기반 Deep Learning 모델은 악성코드별 특징을 분석하고 학습하여, 생성된 도메인을 악성 또는 양성으로 자동 분류한다. ROC 곡선과 AUC 정확도를 기준으로 모델의 성능 평가 결과, 99.21% 이상 뛰어난 탐지 정확도를 나타냈다. 이 모델을 활용하여 악성 도메인을 실시간 탐지할 수 있을 뿐만 아니라 다양한 사이버 보안 분야에 응용할 수 있다. 본 논문은 사용자 보호와 사이버 공격으로부터 안전한 사이버 환경 조성을 위한 새로운 접근 방식을 제안하고 탐구한다.