• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.645-654
• /
• 2011

Temporal supports is proposed for the large block construction of a double-deck truss girder of a bundle type cable-stayed bridge. The design force of the temporal bents cannot be evaluated by a conventional design procedure with gust factored static wind loads. The uplift forces in BS5400 also can not estimate the design forces of the temporal bents properly for the turbulent wind loads. A frequency-domain buffeting analysis is performed to evaluate the design forces of the temporal bents considering the interactions between the girder and temporal supports. Two cases of modeling are compared to estimate the stiffness contribution of temporal supports in determining design forces, i.e., an analysis model including temporal bents in the structural analysis modeling and an analysis model with fixed supports at the bent tops neglecting the stiffness of temporal bents. The consideration of bent stiffness usually generates smaller reaction forces than rigid support modeling. Consequently, the effectiveness and usefulness of the buffeting analysis procedure with full modeling of temporal supports are demonstrated for the design of a temporal bents of the construction of a bundle type cable-stayed bridge.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.26-32
• /
• 2017

This paper presents a low power and high resolution incremental delta-sigma ADC that utilizes a passive integrator instead of an opamp-based active integrator. Opamp is a power-hungry block that involves tight design tradeoffs. To avoid the use of active integrator, the s-domain characteristic of an active integrator is first analyzed. Based on the analysis, an active integrator with low gain design is proposed as an alternative design method. To save power even more aggressively, a passive integrator with no static current is proposed. A 1st order single-bit incremental delta-sigma ADC using the proposed passive integrator is implemented in a 65nm CMOS process. Transistor-level simulation shows that the ADC consumes only 0.6uW under 1.2V supply while achieving SNDR of 71dB with 22kHz bandwidth. The estimated total power consumption including digital filter is 6.25uW, and resulting power efficiency is on a par with state-of-the-art A/D converters.

• Convergence Security Journal
• /
• v.14 no.6_1
• /
• pp.13-21
• /
• 2014

It is needless to say that the port security is very important owing to the geographic setting of Korea and the possibility of the provocation by North Korea. In addition, The security management is necessary for the port and the domain of maritime to block the inflow from overseas because of the increase of international crime as terrorism. The training system for port security guard should be constructed to secure the specialization of the manpower for the efficient port security management. But the training system of port security manpower is not unified and the training is not carried out, therefore it is necessary to improve the training system of port security manpower. In this study, the improvement plan of training system is suggested as follows. First, the unification of the legislation of port security should achieved to establish the guidance of training for port security guard. Second, the specialized training per activities should be done. And lastly, the qualification system should be introduced for the specialization of port security manpower.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.756-763
• /
• 2013

Bilateral filter (BF), functioning by two Gaussian filters, domain and range filter is a nonlinear filter for sharpness enhancement and noise removal. In infrared (IR) small target detection field, the BF is designed by background predictor for predicting background not including small target. For this, the standard deviations of the two Gaussian filters need to be changed adaptively in background and target region of an infrared image. In this paper, the proposed bilateral filter make the standard deviations changed adaptively, using variance feature of mean values of surrounding block neighboring local filter window. And, in case the variance of mean values for surrounding blocks is low for any processed pixel, the pixel is classified to flat background and target region for enhancing background prediction. On the other hand, any pixel with high variance for surrounding blocks is classified to edge region. Small target can be detected by subtracting predicted background from original image. In experimental results, we confirmed that the proposed bilateral filter has superior target detection rate, compared with existing methods.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.5055-5061
• /
• 2014

In this study, an anti-oxidant and anti-tumor protein Latcripin-3 of Lentinula edodes C91-3 was expressed in Escherichia coli. for the first time. According to the cDNA library, the full-length gene of Latcripin-3 was cloned by the methods of 3'-full rapid amplification of cDNA Ends (RACE) and 5'-full RACE. The structural domain gene of Latcripin-3 was inserted into the pET32 a(+). The functional protein of Latcripin-3 was expressed in Rosetta-gami (DE3) E. coli, evaluated by Western blotting and mass spectrometry. DPPH testing showed that the protein Latcripin-3 can scavenge free radicals remarkably well. The activity of functional protein Latcripin-3 on A549 cells was studied with flow cytometry and the MTT method. The MTT assay results showed that there was a decreases in cell viability in a dose-dependent and time-dependent manner in protein Latcripin-3 treated groups. Flow cytometry demonstrated that Latcripin-3 can induce apoptosis and block S phase dramatically in human A549 lung cancer cells as compared to the control group. At the same time, the cell ultrastructure observed by transmission electron microscopy supported the results of flow cytometry. This research offers new insights and advantages for identifying anti-oxidant and anti-tumor proteins.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.196-201
• /
• 2016

Digital watermarking is a technique used to hide information within digital media. Digital watermarking techniques can be classified as either robust watermarking or fragile watermarking. Robust watermarking techniques are generally used for the purpose of copyright protection. In addition, fragile watermarking techniques are used for the authentication and integrity verification of a digital image. Therefore, fragile watermarks should be easily breakable for trivial tampering of a watermarked image. This paper proposes an efficient fragile watermarking method for image tamper detection in the spatial domain. In the proposed method, a hash code and symmetric key encryption algorithm are used. The proposed method of inserting a watermark by dividing the original image into many blocks of small sizes is not weak against attacks, such as cut and paste. The proposed method can detect the manipulated parts of a watermarked image without testing the entire block of the image.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.590-593
• /
• 2009

To identify the detailed 3D flow characteristics of a model scramjet engine, a unified 3D numerical analysis was performed. The numerical domain of concern includes the entire flow path of the model scramjet engine extending from the intake to the nozzle exhaust. Turbulent models($k-{\omega}$ SST and low Reynolds number k-e with Sarkar model) were applied with comparison of experiment result. Intake side wall's effect on flow characteristics was analyzed in view points of flow quality at inlet duct and near the flame holder as well. The code is paralleled with multi-block feature using MPI(Massage Passing Interface) library to speed up the 3D calculation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.16-26
• /
• 2000

The proposed method inserts a watermark information not mto a whole Image region but only into regions of interest(ROIs) To extract the ROIs, we divide an original Image into sub-blocks and use modified Shi-Kuo Chang's PIM(picture information measure) as the criteria to select the ROIs Considering the directional information and frequency bands, we insert the watermark information into sub-blocks m the DCT domain. The proposed method can reduce the distortion in comparison With the other methods which utilize the whole Image as an nor The proposed method makes much less damaged Images m comparison to the other methods And those Images processed by the proposed algorithm are more robust to the changes caused by signal processing operations such as resampling, clipping. noise, and so on Also due to the block-based watermark insertion, the proposed method has the robustness to the Image compression processes such as JPEG and MPEG.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.965-972
• /
• 2005

In this paper, we first review LDPC codes in general and a belief propagation algorithm that works in logarithm domain. LDPC codes, which is chosen for second generation digital video broadcasting standard, are required a large number of computation due to large size of coded block and iteration. Therefore, we presented two kinds of low computational algorithm for LDPC codes. First, sequential decoding with partial group is proposed. It has same H/W complexity, and fewer number of iteration's are required at same performance in comparison with conventional decoder algerian. Secondly, early detection method for reducing the computational complexity is proposed. Using a confidence criterion, some bit nodes and check node edges are detected early on during decoding. Through the simulation, we knew that the iteration number are reduced by half using subset algorithm and computational complexity of early detected method is about $50\%$ offs in case of check node update, $99\%$ offs in case of check node update compared to conventional scheme.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.98-107
• /
• 2001

The phase transition behavior isothermal micro-phase separation kinetics of polyester-based thermoplastic elastomer were studied using the synchrotron X-ray scattering(SAXS) method. The structural changes occurring during heating period were investigated by determining the changes of the one-dimensional correlation function, interfacial thickness and Porod constant. Based on the abrupt increases of the domain spacing and interfacial thickness, a major structural change occurring well below the melting transition temperature is suggested. Those changes are explained in terms of melting of the thermodynamically unstable hard domains or/and the interdiffusion of the hard and soft segments in the interfacial regions. SAXS profile changes during the micro-phase separation process were also clearly observed at various temperatures and the separation rate was found to be sensitively affected by the temperature. The peak position of maximum scattering intensity stayed constant during the entire course of the phase separation process. The scattering data during the isothermal phase separation process was interpreted with the Cahn-Hilliard diffusion equation. The experimental data obtained during the early stage of the phase separation seems to satisfy the Cahn-Hilliard spinodal mechanism. The transition temperature obtained from the extrapolation of the diffusion coefficient to zero value turned out to be about 147$\pm$$2^{\circ}$, which is close to the order-disorder transition temperature obtained from the Porod analysis. The transition temperature was also estimated from the inveriant growth rate. By extrapolating the inveriant growth rate to zero, a transition temperature of about 145$\pm$$\pm$$2^{\circ}$ was obtained.