• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1020-1026
• /
• 2012

In this paper, we proposed a RTOS-based lighting control system to improve energy efficiency. This proposed system, real time process was designed to the specified division of the LED streetlight control module for the RTOS-based lighting control into three different tasks. The first task transmits LED lighting signal by measuring illuminance, and the second task transmits motion detecting signal using motion detector. In the third task, lighting control to LED was designed through passed control signal from other tasks The execution status was examined ports that are directly to the ATmega128 MCU for the verification of the system, and illuminance distribution and operating conditions were verified through LED street field test. The proposed RTOS-based lighting control system has brought improving system performance and also facilitate an addition of other functions, and it was possible to optimize energy saving by intelligent lighting pattern control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1824-1833
• /
• 2016

In this paper, we propose networked airborne relay-based positioning scheme (N-ARPS) based on time division multiple access (TDMA) networks to improve the performance of relative navigation (RelNav). To integrate the ARPS into TDMA, there are three problems such as slot allocation, selection of airborne relays, and method for signal loss to be solved. A subframe of N-ARPS is designed to assign the slots for broadcast and relay of navigation signals consecutively to minimize the effect of mobility. The selection algorithm determines the optimum set of airborne relays by selecting evenly distributed nodes depending on their distances to the master station. Finally, we uses precise position location information (PPLI) messages, which are received in data transmission period, to estimate a user position when the navigation signals are missing. The simulation results indicate that N-ARPS significantly improves user accuracy over RelNav.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.48-55
• /
• 2011

In this paper, we analyze the input-output characteristics of fuzzy inference systems according to the division of entire input spaces and the fuzzy reasoning methods to identify the fuzzy model for nonlinear process. And fuzzy model is expressed by identifying the structure and parameters of the system by means of input variables, fuzzy partition of input spaces, and consequence polynomial functions. In the premise part of the rules Min-Max method using the minimum and maximum values of input data set and C-Means clustering algorithm forming input data into the hard clusters are used for identification of fuzzy model and membership function is used as a series of triangular membership function. In the consequence part of the rules fuzzy reasoning is conducted by two types of inferences. The identification of the consequence parameters, namely polynomial coefficients, of the rules are carried out by the standard least square method. And lastly, we use gas furnace process which is widely used in nonlinear process and we evaluate the performance for this nonlinear process.

• Archives of Plastic Surgery
• /
• v.41 no.4
• /
• pp.366-373
• /
• 2014

Background The advent of skin-sparing mastectomy has allowed for the reconstruction of the breast and nipple with improved cosmesis. However, the nipple-areolar complex (NAC) in Asian patients is more pigmented and scars easily. Therefore, commonly described incisions tend to result in poor aesthetic outcomes in Asian patients with breast cancer. Methods We describe an algorithmic approach to skin-sparing mastectomy incisions in Asian patients on the basis of the location of the biopsy scar and the tumor site and size. Four incision types are described: peri-areolar, a peri-areolar incision with a second distant skin paddle, "racquet handle," and peri-areolar with adjacent skin excision. Results 281 immediate breast reconstructions were performed between May 2001 and February 2012 after skin-sparing mastectomy. The mastectomy incisions used included the peri-areolar design (n=124, 44%), peri-areolar design with a second distant skin paddle (n=39, 14%), "racquet handle" (n=21, 7.5%), and peri-areolar design with adjacent skin excision (n=42, 14%). The traditional elliptical incision and other variants where the NAC outline was not preserved were performed in the remaining 55 patients. The average follow-up was 44.7 months during which there was 1 case of total flap loss and 7 cases of partial flap necrosis; all remaining flaps survived. 24% of the patients (68/281) underwent subsequent nipple reconstruction. Conclusions Our algorithm avoids breast incisions that are randomly placed or excessively long and prevents the unnecessary sacrifice of normal breast skin. This allows skin-sparing mastectomy and immediate breast reconstruction to be performed with a consistently achievable aesthetic result in Asian women without neglecting oncological safety.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.1011-1030
• /
• 2019

Remote sensing sensors used in satellites or aircrafts measure electromagnetic waves passing through the earth's atmosphere, and thus the information on the surface of the earth is affected as it is absorbed or scattered by the earth's atmosphere. Although satellites have different wavelength ranges and resolutions depending on the purpose of onboard sensors, in general, atmospheric correction must be made to remove the influence of the atmosphere in order to accurately measure the spectral signal of an object on the earth's surface. The purpose of atmospheric correction is to remove the atmospheric effect from remote sensing images to determine surface reflectivity values and to derive physical parameters of the surface. Until recently, atmospheric correction algorithms have evolved from image-based empirical methods or indirect methods using in-situ observation data to direct methods that numerically interpret more complex radiative transfer processes. This study analyzes the research records of atmospheric correction algorithms developed over the past 40 years, systematically establishes the current state of atmospheric correction technology and the results of major atmospheric correction algorithms and presents the current status and research trends of related technologies.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.403-418
• /
• 2020

In recent years, the use of Fiber Reinforced Polymers (FRPs) as one of the most common ways to increase the strength of concrete samples, has been introduced. Evaluation of the final strength of these specimens is performed with different experimental methods. In this research, due to the variety of models, the low accuracy and impact of different parameters, the use of new intelligence methods is considered. Therefore, using artificial intelligent-based models, a new solution for evaluating the bond strength of FRP is presented in this paper. 150 experimental samples were collected from previous studies, and then two new hybrid models of Imperialist Competitive Algorithm (ICA)-Artificial Neural Network (ANN) and Artificial Bee Colony (ABC)-ANN were developed. These models were evaluated using different performance indices and then, a comparison was made between the developed models. The results showed that the ICA-ANN model's ability to predict the bond strength of FRP is higher than the ABC-ANN model. Finally, to demonstrate the capabilities of this new model, a comparison was made between the five experimental models and the results were presented for all data. This comparison showed that the new model could offer better performance. It is concluded that the proposed hybrid models can be utilized in the field of this study as a suitable substitute for empirical models.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.55-65
• /
• 2002

Wavelet transform has recently emerged as a promising technique for video processing applications due to its flexibility in representing non-stationary video signals. Motion estimation which uses wavelet transform of octave band division method is applied In many places but if motion estimation error happens in the lowest frequency band. motion estimation error is accumulated by next time strep and there has the Problem that time and the data amount that are cost In calculation at each steps are increased. On the other hand. wavelet packet that achieved the best image quality in a given bit rate from a rate-distortion sense is suggested. But, this method has the disadvantage of time costs on designing wavelet packet. In order to solve this problem we solved this problem by introducing Top_down method. But we did not find the optimum solution in a given butt rate. That image variance can represent image complexity is considered in this paper. In this paper. we propose a fast multiresolution motion estimation scheme based on the adaptive wavelet transform for video compression.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.5
• /
• pp.345-351
• /
• 2009

Organic cation transporters (OCTs) are important for absorption, elimination of many endogenous small organic cations as well as a wide array of drugs and environmental toxins. This gene is located in a cluster on chromosome 6 and OCTs are in major organs such as intestine, liver, kidney, brain and placenta. Therefore, expression levels and function of OCTs directly affect plasma levels and intracellular concentrations of drugs and thereby determine therapeutic response. The aim of this study was to investigate the frequency of the SNPs on OCT1 (C181T and C1022T) and OCT2 (G808T) to analyze haplotype frequency in healthy Korean population. Human subjects have been genotyped for OCT1 (C181T for 195 subjects and C1022T for 825 subjects), using polymerase chain reaction-based diagnostic tests (RFLP). And for OCT2 (G808T), a total of 861 subjects have been genotyped, using pyrosequencing method. Haplotype was statistically inferred using an algorithm based on the expectation-maximization (EM). OCT1 C181T genotyping showed 100% homozygous wild-type (C/C). OCT1 C1022T genotyping showed wild-type (C/C), heterozygous (C/T) and homozygous mutant-type (T/T) and each accounted for 72.1, 24.5 and 3.4%, respectively. OCT2 G808T genotyping results also showed homozygous wild-type (G/G), heterozygous (G/T) and homozygous mutant-type (T/T) and each took 81.8, 17.9 and 0.3%, respectively. Based on these genotype data, haplotype analysis between OCT1 C181T and OCT1 C1022T has proceeded. The result has revealed that linkage disequilibrium between alleles is not obvious (P=0.0122).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2757-2763
• /
• 2015

p-Snake is an energy minimizing algorithm that applies an additional prototype energy to the existing Active Contour Model and is used to extract the contour line in the area where the edge information is unclear. In this paper suggested the creation of a prototype energy field that applies a variable prototype expressed as a combination of circle and straight line primitives, and a fudge function, to improve p-Snake's contour extraction performance. The prototype was defined based on the parts codes entered and the appropriate initial contour was extracted in each primitive zones acquired from the pre-processing process. Then, the primitives variably adjusted to create the prototype and the contour probability based on the distance to the prototype was calculated through the fuzzy function to create the prototype energy field. This was applied to p-Snake to extract the contour from 100 images acquired from various small parts and compared its similarity with the prototype to find that p-Snake made with the adaptive prototype was about 4.6% more precise than the existing Snake method.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.246-255
• /
• 2016

The orthogonal frequency-division multiple access (OFDMA) systems are well suited to multi-rate multicast transmission, as they allow flexible resource allocation across both frequency and time, and provide adaptive modulation and coding schemes. Unlike layered video coding, the multiple description coding (MDC) enables flexible decomposition of the raw video stream into two or more substreams. The quality of the video stream is expected to be roughly proportional to data rate sustained by the receiver. This paper describes a mathematical model of resource allocation and throughput in the multi-rate video multicast for the OFDMA wireless and mobile networks. The impact on mean opinion score (MOS), as a measurement of user-perceived quality (by employing a variety of scheduling disciplines) is discussed in terms of utility maximization and proportional fairness. We propose a pruning algorithm to ensure a minimum video quality even for a subset of users at the resource limitation, and show the optimal number of substreams and their rates can sustain.