• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.894-897
• /
• 2008

This paper analyzes the throughput performance of a selective repeat (SR)/automatic repeat request (ARQ) scheme to transmit packet data in burst home network channel. To combat the high degree of error caused by transmission of home network data a robust error control scheme is a necessity. Basically, error control schemes can be divided in two categories: ARQ schemes and forward error correction (FEC) schemes. ARQ schemes are often used for reliable data transmission. The performance of packet transmission using SR-ARQ schemes for bursty channels is analyzed and simple analytical expressions of its throughput are presented. Theoretic analysis and numerical results indicate that a small number of packet sizes can get good performance in bursty home network channel.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.395-397
• /
• 2006

Air interlacing serves to protect the yarn against damage, strengthens inter-filament compactness or cohesion, and ensures fabric consistency. The air interlacing nozzle is used to introduce intermittent nips to a filament yarn so as to improve its performance in textile processing. The effect of various interlacing nozzle geometries on the interlacing process was studied. The geometries of interlacing nozzles with single or multiple air inlets located across the width of yarn channels are investigated. The basis case is the yarn channel, with a perpendicular main air inlet in the middle. Other cases have main air inlets, slightly inclined double sub air inlets, The yarn channel cross sectional shapes are either semicircular or rectangular shapes. The compressed impinging jet from the main air inlet hole hits the opposing bottom wall of the yarn channel, is divided into two branches, joins with the compressed air coming out from sub air inlet at the bottom and creates two free jets at both ends of the yarn channel. The compressed air movement in the cross-section consists of two opposing directional vortices. The CFD-FASTRAN flow parallel solver was used to perform steady simulations of impinging jet flow inside of the interlace nozzles. The vortical structure and the flow pattern such as pressure contour, particle traces, velocity vector plots inside of interlace nozzle geometry are discussed in this pater.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1654-1675
• /
• 2014

In practical wireless systems, the erroneous channel state information (CSI) sometimes deteriorates the performance drastically. This paper focuses on robust design of coordinated set planning of coordinated multi-point (CoMP) transmission, with respect to the feedback delay and link error. The non-ideal channel models involving various uncertainty conditions are given. After defining a penalty factor, the robust net ergodic capacity optimization problem is derived, whose variables to be optimized are the number of coordinated base stations (BSs) and the divided area's radius. By the maximum minimum criterion, upper and lower bounds of the robust capacity are investigated. A practical scheme is proposed to determine the optimal number of cooperative BSs. The simulation results indicate that the robust design based on maxmin principle is better than other precoding schemes. The gap between two bounds gets smaller as transmission power increases. Besides, as the large scale fading is higher or the channel is less reliable, the number of the cooperated BSs shall be greater.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.157.2-157.2
• /
• 2012

Direct-conversion receivers often suffer from a DC-offset that is a by-product of the direct conversion process to baseband. In general, a basic approach to reduce the DC-offset is to do simple average of the baseband signal and remove the DC by subtracting the average. However, this gives rise to a residual DC offset which degrades the performance when the receiver adopts the coding schemes with high coding rates such as 8-PSK. Therefore, more advanced methods should be additionally required for better performance. While the training sequences are basically designed to have good auto-correlation properties to facilitate the channel estimation, they may be not good for the simultaneous estimation of the channel response and the DC-offset. Also the DC offset compensation under a bad condition does not give good results due to the estimation error. Correspondingly, the proposed scheme employs the two important points. First, the training sequence codes are divided into two groups by MSE(Mean Squared Errors) for estimating the channel taps and then SNR calculated from each group is compared to predefined threshold to do fine DC-offset estimation. Next, ON/OFF module is applied for preventing performance degradation by large estimation error under severe channel conditions. The simulation results of the proposed scheme shows good performances compared to the existing algorithm. As a result, this scheme is surely applicable to the receiver design in many communications systems.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.8-14
• /
• 2013

For alleviating the low spectrum efficiency problem of orthogonal frequency division multiplexing (OFDM), due to the strong inter-cell-interference (ICI) at cell's edge, we introduce comb-spectrum code division multiple access (CS-CDMA) into broadband OFDM system at downlink channel for enabling the use of entire spectrum for seamless coverage. In addition, we develop a new method, called orthogonal cell code (OCC) scheme, to assist CS-CDMA for nullifying the ICI from contiguous cells. In system operation, each of the conventional cells is divided into an outer cell and an inner cell, and a mobile station (MS) should access to the CS-CDMA when it is in the outer cell and access to OFDM when it is in the inner cell. This study investigates the spectrum efficiency of using CS-CDMA and makes a comparison with that of long term evolution (LTE) in the following cases; (1) under an assumption of perfect channel state information and (2) based on channel estimates at a MS station. The results show the great advantage of utilizing the proposed system.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.1-11
• /
• 1991

As increasing needs of marine transportation , world merchant fleet and ship's size were enlarged and it caused frequent disasters in human lives and natural environment. By the reason of the above, they started to establish the Vessel Traffic System (VTS) at the European coast in 1960' and most of advanced contries established and managed it to prevent the sea traffic accidents in these days. The concept of traffic control at sea can be divided into three types. First, the initial gathering of informations about ship's identity and movement etc.. Second, monitoring of the traffic flow and amendment of instructions. Third , organization and direction of ships by allocating routes and speeds. Where the goal of traffic control is safety of traffics and developing effectiveness of navigation channel, if traffic volume is less tan channel capacity then the above first or second level of control would be sufficient but if it is bigger than that , more positive policy of control should be adopted as same as third type of the above. In this paper where the strategy of VTS is focused on the control of traffic density to be spread equality, as possible , all over the navigation channels and also improvement of effectiveness , it suggests algorithm to assign the vessels to the channels with balanced traffic density , and other algorithms using D.P. to sequence the vessels assigned to one channel in optimum order which decreases the mean waiting time in sense of channel effectiveness with numerical examples.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.5-20
• /
• 2002

To investigate the effect of mechanical parameters on the circulation and its fluctuation in Sagami Bay, baroclinic model experiments were carried out by use of a two-layer source-sink flow in a rotating tank. In the experiment, a simple coastal topography with flat bottom was reproduced. The results show that the path of the Through Flow, which corresponds to the branch current of the Kuroshio, depends on external Rossby number (Ro) and internal Rossby number $(Ro^*)$, and divided into two regimes. For $Ro^*\leq1.0$ in which Rossby internal radius of deformation of the Through Flow is smaller than the width of the approaching channel, the current flows along the Oshima Island as a coastal boundary density current separated from the western boundary of the channel. For $Ro^*>1.0$ it changes to a jet flow along the western boundary of the channel, separated from the coast of Oshima Island. The current is independent on both Ro and Ro* in the regime of $Ro^*>1.0,\;Ro\geq0.06$ and $Ro^*\leq1.0,\;Ro\geq0.06$. The pattern of the cyclonic circulation in the inner part of the bay is also determined by Ro and Ro*. In case of $Ro^*\leq1.0$, frontal eddies are formed in the northern boundary of the Through Flow. These frontal eddies intrude into the inner part along the eastern boundary of the bay providing vorticity to form and maintain the inner cyclonic circulation. For $Ro^*>1.0$, the wakes from the Izu peninsula are superposed intensifying the cyclonic circulation. The pattern of the cyclonic circulation is divided into three types; 1) weak cyclonic circulation and the inner anticyclonic circulation $(Ro<0.12)$. 2) cyclonic circulation in the bay $(0.12\leq Ro<0.25)$. 3) cyclonic circulation with strong boundary current $(RO\geq0.25)$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1738-1746
• /
• 2002

In the FSI (Fluid-Structure Interaction) problems, two different governing equations are to be solved together. One is fur the fluid and the other for the structure. Furthermore, a kinematic constraint should be imposed along the boundary between the fluid and the structure. We use the combined formulation, which incorporates both the fluid and structure equations of motion into a single coupled variational equation so that it is not necessary to calculate the fluid force on the surface of structure explicitly when solving the equations of motion of the structure. A two-dimensional channel flow divided by a Bernoulli-Euler beam is considered and the dynamic response of the beam under the influence of channel flow is studied. The Navier-Stokes equations are solved using a P2P1 Galerkin finite element method with ALE (Arbitrary Lagrangian-Eulerian) algorithm. The internal structural damping effect is not considered in this study and numerical results are compared with a previous work fer steady case. In addition to the Reynolds number, two non-dimensional parameters, which govern this fluid-structure system, are proposed. It is found that the larger the dynamic viscosity and density of the fluid are, the larger the damping of the beam is. Also, the added mass is found to be linearly proportional to the density of the fluid.

• Journal of Korean Medical classics
• /
• v.34 no.3
• /
• pp.73-83
• /
• 2021

Objectives : To organize the acupoints used to treat disorders of the head and face in the Zhenjiuzishengjing, and examine their characteristics in application. Methods : 1. The head and face area was divided into 8 parts according to the textbook of meridians and acupoints. Channels belonging to each part were marked. 2. Disorders as mentioned in the Zhenjiuzishengjing were categorized into 8 groups, accordingly. 3. Acupoints used to treat each disorder were organized according to the channels each belonged to. 4. The points were divided according to their proximity, and their application frequency was organized. 5. Based on the organized contents, the characteristics of using proximal and distal points, together with the interrelationship between the channel belonging to the afflicted area and the points locations were examined. Results : In treating disorders in the head and face area, various distal points along with proximal points were suggested in the Zhenjiuzishengjing. In some cases, points belonging to a channel that was irrelevant to the afflicted area were used widely; for proximal points, the Governor/Conception/Triple Energizer/Gallbladder channels were used. For distal points, channels that were related to the Five Zhang were used. Conclusions : Based on the contents of the Zhenjiuzishengjing, the following could be concluded: 1. When treating disorders of the head and face caused by heat, distal points were mostly used. 2. In cases where points which are not part of channels that pass the head or face were used, Zhang disfunction was likely behind such points selection.