• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.915-920
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_{2}-gain$ from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.59-65
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_2$-gain from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.508-519
• /
• 2018

This paper concerns on stabilization control of a gyro-stabilized 2-axes gimbal system which is mounted on a moving vehicles such as automobiles, armored vehicles, ships, flying vehicles, etc. A target image acquisition system is attached on the inner gimbal, and the gimbal systems are required to retain high stabilization accuracy in the absolute coordinate in order to provide fine target image while vehicle is moving. The stabilization control performance is hardly depended upon disturbance rejection ability of control, and disturbance feedforward compensation is effective because feedforward compensation reduce the amount of disturbance before the disturbance disturbs the systems. This paper suggests an experimental method which can estimate system parameters and disturbance torques by using 3-axes accelerometer mounted on the inner gimbal. Furthermore, a simple disturbance identification method which can be applied to any slanted base conditions has been suggested to identify mass unbalance vector and friction torques of each gimbal simultaneously. By using the estimated parameters, a feedforward compensation has been applied to the gyro-stabilized 2-axes gimbal system. The experimental results showed that the feedforward compensation based on the identification method suggested is effective to improve stabilization performances.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.131-136
• /
• 2006

최근 전통적인 PI제어를 적용한 유도전동기의 제어운전시스템이 산업현장에 많이 보급되어 있다. 그러나, 이러한 방법은 파라미터 변동이나 부하외란에 대해 매우 민감하며, 속도 제어기의 이득이 고정되어 전동기 운전 중에 파라미터가 변하거나 스텝상태로 변화하는 부하가 걸리게 되면 안정성과 추종성능이 악화되는 경향이 있다. 본 논문에서는 전동기의 기계적인 파라미터 변화와 함께 외란의 변화에 대하여 강인한 외란상쇄 제어를 고려하였다. 제안한 시스템은 부하토크를 최소차원 상태관측기를 근거로 추정하였다. 따라서 상태관측기를 사용한 속도제어기는 토크에 대한 Feedforward 루프를 조건으로 사용할 수 있으므로 강인한 속도제어 시스템을 실현할 수 있다. 또한 스텝입력 상태의 외란에 대하여 최적제어 시스템 설계를 하였다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3581-3586
• /
• 2009

이 논문은 피드포워드 왜란상쇄 관측기를 이용하여 유도전동기의 강인한 제어를 얻을 수 있었다. 전통적인 비례적분 제어기의 속도응답 특징은 부하 토크 요소의 변이에 영향을 받는다. 제안한 시스템에서 속도제어 특성은 부하토크 외란에 영향을 받지 않는 피드포워드 제어를 사용하였다. 벡터제어를 위한 높은 속도의 계산과 처리를 위해 TMS320C31 디지털 프로세서를 사용하였다. 제안한 제어 방법의 타당성을 입증하기 위해 시뮬레이션과 실험을 통해 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.816-819
• /
• 2003

This paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control with Matlab simulink. The speed response of conventional PI controller characteristics is affected by variation of load torque disturbance. In this system, the speed control characteristics using a feedforward control toughen about a load torque disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1088-1090
• /
• 2002

This paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional PI controller characteristic is affected by variations of load torque disturbance. In the proposed system. the speed control characteristic using a feedforward control isn't affected by a load torque disturbance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.150-153
• /
• 2002

This paper designed a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional Pl controller characteristic is affected by variations of load torque disturbance. In the proposed system the speed control characteristic using a feedforward control isn't affected by a load torque disturbance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.179-182
• /
• 2002

This Paper described a robust control of an induction motor using a disturbance cancellation observer of a feedforward control, The speed response of conventional Pl controller characteristic is affected by variations of load torque disturbance. Tn the proposed system, the speed control characteristic using a feedforward control isn't affected by a load torque disturbance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.488-493
• /
• 2005

In gun stabilization systems, the torque comes from the unbalance mass of gun and the base acceleration is an important source of disturbance which degrades stabilization performance. Fatigue of gear train is another important factor affecting structural safety problems. In this paper, a feedback control gain is designed by optimal control weighting to difference between motor and gun velocity, and a feedforward controller using FXLMS algorithm is adopted to investigate those problems. Experimental results show that the feedforward compensator based on FXLMS can reduce the disturbance effects. The directional convergence property according to initial conditions of the FXLMS is also shown through experiments.