• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.462-467
• /
• 2013

This paper presents a modified disturbance observer (MDOB) for controlling two arms of a manipulator designed for a home service robot. The MDOB is slightly different from the original DOB in that it uses an accelerometer to measure acceleration of the robot arm. Then it uses the acceleration to estimate the disturbance to cancel out in the control loop. Relying on the acceleration information of the robot arm, a partial model-based control structure is formed. Experimental studies of position control of 2 DOF robot arm are conducted to evaluate the performance of the proposed position control by an MDOB method.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.360-362
• /
• 2006

This paper proposes a new track-following control method using disturbance observer with the freedom of gain and frequency adaptation in optical disk drive system. Recent ODDs use smaller track pits, higher rotation speed and broader rotational speed variations to increase the data capacity and data transfer rate. This cause the degradation of track-following performance by increasing the disturbance of the rotary system. In this paper, we discussed on a DOB structure that efficiently attenuate the disturbance without effecting the overall feedback loop characteristics on CLV type ODD which uses a higher and broader range of rotational speed. DOB structure uses two band pass filter. We analyzed the track-following performance sensitivity on rotational frequency variance and gain changes. This analysis is done on a computer simulation environment and actual ODD product.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.74-79
• /
• 2010

Many control techniques have been purposed in order to improve the control performances of the control system. The freedom on control in the control system is decided by the number of the closed-loop transfer function which can adjust independently. The design method of the controller with two degrees of freedom(TDOF) is used extensively for following the desired value and rejecting the disturbance. In this paper, the control system with the disturbance observer(DOB) for rejecting the disturbance is transformed by the control system with TDOF and the rejection of a transient response is easy at the starting time and load variation. The design method of the DOB is proposed in the frequency-domain and the control system with TDOF is constructed by using the DOB which is designed with this method. Through the simulation results, the usefulness of the proposed algorithm is proved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.15-22
• /
• 2014

The automobile cruise control system tries to maintain a constant velocity in the face of disturbance mainly caused by mass changes or changes in the slope of a road. The controller should compensate for such disturbances and model uncertainties. In this paper, we study on the disturbance observer based controller for cruise control system. In the presence of disturbances and model uncertainties, we carry out computer simulations in order to compare the performance of the conventional PI controller and DOB controller. From the simulation results, we found that the performance of DOB controller is superior to that of the conventional PI controller.

• The Journal of Korea Robotics Society
• /
• v.18 no.2
• /
• pp.155-163
• /
• 2023

Auto Guided Vehicle (AGV) equipped with mecanum wheels can move in all directions, unlike ordinary wheeled AGVs. In this paper, we propose a robust trejectory tracking control method for the mecanum wheeled AGVs in the presence of disturbances. It is constructed by combining impedance control with Integral Sliding Mode Control (ISMC), which shows robust performance against disturbances, and adding a disturbance observer (DOB) that estimates and removes disturbances. Simulation result using MATLAB/SIMULINK shows that the proposed control method has robust performance in tracking the reference trajectory under the circumstance with disturbance. The control performance is further improved when the disturbance observer is additionally used. In addition, the performance of the proposed control method was verified through experiment. It shows the result of tracking the set trajectory well.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.693-696
• /
• 2003

Among many servo control systems in steel making plant, AGC system in hot rolling mill is very important to get a accurate strip thickness for good quality. AGC (Auto Gauge Control) system controls the roll gap to maintain the required thickness by using the variation of roll force and the measure of output thickness. In this paper, a simulator of AGC system which unifies both hydraulic servo control system and AGC algorithm is suggested. After proving the concurrence of algorithms between the simulator and real system, main actuator system is added. Instead of usual PI system used in present system, DOB control scheme is applied and shows the effect of disturbance attenuation well.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.82-87
• /
• 2023

This paper proposes a disturbance observer-based control for 6-DOF remotely operated underwater vehicles with model uncertainties. The sum of external disturbance and the forces generated from model parameters except for the inertial matrix of the hydrodynamic model is defined as a lumped disturbance in this paper. Then, the lumped disturbance caused by model uncertainties and the external forces is estimated using the disturbance observer. Fortunately, the disturbance observer is constructed as a linear form because all the elements of the inertial matrix of the hydrodynamic model are constants. To verify the proposed control scheme, we show that the actual lumped disturbance is similar to the estimated lumped disturbance obtained by the disturbance observer. Finally, the position tracking performance in the disturbance environment is confirmed through the comparative study with a traditional inverse dynamics PD controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.950-955
• /
• 2014

In this paper, we propose a drug treatment protocol for the three state HIV infection model that explicitly includes the concentration of healthy T cells, infected T cells, and HIV. While most of the previous methods are not able to achieve the treatment goal in the presence of modelling errors, the proposed method is designed so as to compensate for the model uncertainties. Based on the Jacobain linearization of nonlinear HIV infection model, disturbance observer(DOB) based control is employed to design the drug treatment for the HIV patients. Computer simulation is carried out for nonlinear model in order to compare the performance of the proposed method with that of the conventional technique. The simulation results show that, in the presence of parameter uncertainties, the substantial improvement in the performance can be achieved by the proposed DOB controller.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1299-1306
• /
• 2017

This paper presents a boundary tracking control of an agent. To this end, it is shown that the boundary tracking problem can be reformulated into a robust control of uncertain double integrator first. Then, a disturbance observer (DOB) based control is proposed solving the robust control problem. Unlike the existing results in the literature, the proposed DOB based control requires only the local position measurement of the boundary (not the gradient information). The performance of the proposed control is demonstrated for two cases: the measurement of the boundary is given in a continuous or discrete manner. Finally, it is shown that the proposed control can be used for environmental monitoring as well by showing that the agent follows a level curve of real environmental monitoring data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1179-1185
• /
• 2010

This paper deals with a robust controller design problem for a small one-link robot arm system subject to input time delay and load variations. The uncertain parameters of the system are considered as a disturbance input. A disturbance observer(DOB) has been designed to alleviate disturbance effects and to compensate performance degradation owing to the time-delay. This paper employs a new DOB structure for non-minimum phase systems together with the Smith predictor. We propose a new controller for reducing the both effects of disturbance and time-delay. In order to test the performance of proposed controller, four different other control laws are compared with the proposed one by computer simulations. The simulation results show the effectiveness of the proposed control method.