• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.996-998
• /
• 1996

The drum-type hill-drop unit, an important working device of the plastic -film-covered hill planter, can finish filling and separating seed precisely, perforating film and holing , and its seeding depth and spacing are stability . The unit is applied to hole seed many crops, for example, cotton, corn , soybean, etc. The drum-type hill-drop unit(DHU) , the key work unit to the plastic film-covered planter, mainly consists of distributor box , seeding parts, hole forming unit and drum , It can be operated to accomplish seeds distributing, hole forming , plastic film perforating . Moreover , its inner cavity can be used as seed box.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.81-84
• /
• 2002

With the increasing market dynamics, the concept of agile manufacturing system gets more and more attention. For a manufacturing system to be agile, the supply chain should also have sufficient agility. However, most of the supply chain design methods are based on the human experience or trial-and-errors. In this paper, a systematic methodology is proposed. It takes into account the agility of supply chain, the behavior of which is represented as a beam model in mechanics, composed of supplier, transporter, manufacturer, distributor, and customer.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2000

A new hose slurry spreader with improved spreading uniformity is developed to distribute the slurrynear to the soil surface and to reduce odor problems. The precision of distributed slurry was investigated using 3 types of slurry and found to be dependent on the rotor speed. For the solid matter separated fluid containing 0.1% of dry matter rotor speed of 150 rpm showed best uniformity with CV of 10% In the case of slurry from dairy cattle which contains 8.2% of dry matter high rotor speed of 330 rpm showed best result with CV of 7.2% Also swine slurry which has a 13.6% of dry matter content showed the best result of 8.1% CV at the high rotor speed of 250rpm. A high rotor speed generates enough pressure in the central distributor and as a result uniform distribution of slurry can be achieved. In conclusion it is highly recommended rotor speed of 300 rpm to get the best performance.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.313-321
• /
• 2014

본 연구는 공급자(supplier)가 중간 유통자(wholesaler/retailer)의 수요 증대를 목적으로 중간 유통자의 주문량에 따라 차별적으로 외상 기간을 허용한다는 기본적인 가정 하에 중간 유통자의 재고 모형을 다루었다. 문제 분석을 위하여 최종 고객(customer)의 수요는 중간 유통자의 재고 수준에 따라 선형적(linearly)으로 증가한다는 가정하에 모형을 분석하였고, 모형 분석을 통하여 중간 유통자의 이익을 최대화하는 경제적 주문주기와 경제적 주문량 결정 방법을 제시하고, 예제를 통하여 그 제시된 해법의 타당성을 보였다.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2002

This paper is concerned with the development of a new method for making, separating ice and storage floated ice by installing an evaporation plate at under-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating an ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. Developed new harvest-type method shows good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, however these components are not necessary in a new method. In this study ice storage systems are experimentally investigated to study the charge and discharge of thermal energy. The results show the applicable possibility and performance enhancement of a new type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.460-467
• /
• 2010

In housing units constructed recently in Korea, the length of ondol coil is different in each room, so the flow rate of hot water is adjusted by setting valve opening. If the flow rate is not appropriate for heating load, the room temperature seriously deviates from the set temperature range for comfort. In particular, too small valve opening can induce a noise by cavitation. In order to adjust the valve opening, two methods by zone area and a new method by return temperature rise were modelled and simulated using TRNSYS and EES. As a result, heating energy consumption during one week was the same on three methods, but the room temperature of the new method minimally deviated from the range of set temperature with a low possibility of noise.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.201-202
• /
• 2017

시중에는 범용 전자상거래 솔루션이 다수 출시되어 있으나, 소규모 B2B 유통업체 및 그 소비자를 대상으로 하는 특수한 요구사항을 충족하기에 힘든 문제점으로 인하여, 해당 분야에서는 전통적인 방식의 상거래 위주로 이루어지고 있다. 본 논문에서는 소규모 B2B 유통업체의 요구사항에 최적화된 전자상거래 시스템을 제안하고, 제안한 시스템의 특징과 그 개발사례를 제시한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.11
• /
• pp.762-768
• /
• 2011

We use floor radiant heating system in the house of commons in winter Floor radiant heating system, which transfer heat by radiation, is one of the energy efficient and comfortable systems that. Floor radiant heating system is configured to be controlled by the room for energy-saving. Proper flow rate to a comfortable heating in the room is important. However, Using a constant speed circulation pump in separate rooms, heating system may cause an imbalance because of the difference of length of coil when operating in the rooms. In this study, our Research team examined heating imbalance due to the variation length through the coil length changes and flow control of the circulation pump.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.155-167
• /
• 2006

본 논문은 제품공급자, 중간분배자 그리고 고객으로 구성된 2 단계 공급사슬에서 공급자가 수요 증대를 목적으로 중간분배자에게 일정기간 동안 제품대금에 대한 지불연기를 허용하는 상황을 고려하여 중간분배자의 신뢰성있는 판매가격 및 재고보충정책을 결정하는 문제를 다루었다. 문제 분석을 위하여 고려하는 제품은 시간에 따라 일정률로 퇴화한다는 가정과 함께 수송량에 따라 할인되는 수송비를 고려하여 모형을 수립하였고, 중간분배자의 수익 증대를 위한 경제적 판매가격 및 재고보충정책 결정을 위한 해법을 개발하였다.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.167-174
• /
• 2008

본 연구는 공급자, 중간분배자 그리고 고객으로 구성된 2 단계 공급사슬에서 시간에 따라 일정률로 퇴화하는 퇴화성 제품을 취급하는 중간분배자의 경제적 재고모형을 분석하였다. 문제 분석을 위하여 공급자는 고객으로부터의 수요를 증대시키기 위한 수단으로 일정한 묶음 단위별로 일정한 양의 덤을 제공한다는 가정 하에 재고모형을 설계하였고, 모형 분석을 통하여 이익을 최대화하는 경제적 주문량 결정 방법을 제시하였다. 또한 예제를 통하여 제시된 해법을 적용하고, 그 타당성을 보였다.