• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.201-213
• /
• 1990

Mineralogy, chemistry, physical property, and fossil abundance have been studied for the samples collected from three weathering profiles, two from the Duho Formation and one from the Hagjeon Formation in the Tertiary sediments in the Pohang area. The mineralogy of the samples from the Duho Formation shows somewhat different from that of the Hagjeon Formation. Kaolinite is more abundant and shows higher crystallinity in samples from the Duho Formation than those in the Hagjeon Formation, but clay mineral assemblage in each weathering profile remain fairly constant with depth. This difference in mineral distribution seems to be inherited from original source materials. It indicates that little or not severe leaching has been taking place in these three weathering profiles. Weathering indicies indicate different degrees of susceptibility to chemical weathering in these two formations. The Duho Formation has a higher degree of susceptibility to weathering than that of the Hagjeon Formation which is mainly due to differences in clay mineral assemblages in both formations. A noticeble colour difference between oxidized and unoxidized zones in each profile can be easily recognized which is definetely due to different decomposition rate organic carbon by various oxidation state from surface to bottom of the profile. Weathering process have also intensively influenced microfossil preservation about up to 7-10 m in depth in the Duho Formation. Consequently, characteristics observed at weathering surface should be used as a subsidiary tool in setting geologic boundary or establishing formation. Great care must be taken to choose sampling site for microfossil study.

• The Journal of Fisheries Business Administration
• /
• v.44 no.3
• /
• pp.15-28
• /
• 2013

Abalone aquaculture has developed very rapidly in Korea. Until the mid 1990s it has annually produced about 100 tons. Since then the yield has increased to about 9,000 tons in 2012. The amount accounts for 20% of the global abalone yield. About 86% of produced abalone is consumed domestically and the rest is exported. 100 tons for export seemed as an unattainable goal back in 2003. However, the export rose up to 1,333 tons in 2012. Despite its rapid growth, Korean abalone industry is faced with some problems. The first is the slowdown of yield increase rates. Abalone production increased by 50~60% until the mid 2000. However, the rate continued to drop to below 10%. Reasons behind the slow increase are deteriorating aquaculture grounds and worsening market problems. Constant aquaculture aggravated productivity and overcrowded facilities at a limited space made matters worse. Moreover, abalone export has stalled and so did domestic consumption. In the meantime, rising mortality of young abalone has lowered productivity at abalone breeding places. The mortality rates of abalone remained below 5% in the early 2000s but rose to 30~40% these days. This translates into rising abalone prices. The market problems imply stagnant or shrinking export as well as domestic consumption. The export increase rates took a nosedive from 200 to below 50 between the early 2000s and the late 2000s. Moreover, the increase rates of domestic consumption have become remarkably sluggish. According to, it stood at 50~60% in the mid 2000s but continued to decrease after 2008. These problems, in turn, affected the size of abalone. The usual abalone size for market was 10~12 shells per kg, but recently the size became smaller and smaller to 15~16 shells per kg. The change of size implies shift in consumption patterns: Consumers not only eat live abalone but also they cook soup with it. The size of abalone for uncooked dish is usually very big, like 10~12 shells per kg. In contrast, smaller abalone, such as 20~25 shells per kg, are used for making soup. Increasing use of smaller abalone leads to lower income of abalone aquaculture households. This is partly because that the size determines the price and the price gap between big abalones and smaller ones is extreme in Korea. For the sustainable growth of Korean abalone industry, we need to come up with strategies. First, a reasonable production system needs to be in place, especially for better management of abalone aquaculture grounds. Management of abalone licenses is also necessary because local governments issue relevant licenses as well as supervising abalone grounds. Second, abalone export destination need to be diversified. Japan, the major importer of Korean abalone, takes up a lion's share of export, at 95%. Third, new consumption style of abalone needs to be developed. Abalone used to be consumed as 'raw type' or Sashimi in Korea. This sole type of consumption hampers the growth of abalone market. Moreover, more strategies are needed to encourage and distribute home cooking of abalone rather than eating-out at restaurants. Last but not least, distribution system should be improved for better delivery of live abalone.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.446-452
• /
• 2003

Some new nanohybrid materials have been synthesized by intercalating the oxotitanium(IV) meso-tetrakis(4- sulfonatophenyl) porphyrin$(O=Ti^{(IV)} TSPP)$ into the Zn/Al layered double hydroxides (LDHs), and their structures and photophysical properties have been investigated by various laser spectroscopic techniques. According to the XRD pattern of the synthesized nanohybrid materials, the macrocycle plane of $O=Ti^{(IV)}$ TSPP are grafted perpendicular to the LDH layers. The $O=Ti^{(IV)}$ TSPP-intercalated LDH exhibits band broadening of the absorption spectrum and a blue shift of Q-band as compared to that observed in solution. Resonance Raman spectral measurements demonstrate that the positively charged LDHs give rise to a slight decrease of the electronic density of the porphyrin ring accompanying a small change of the electronic distribution of the $O=Ti^{(IV)}$ TSPP. Consequently the LDH environment affects the energies of the two highest occupied molecular orbitals (HOMOs) of the $O=Ti^{(IV)}$) TSPP, $a_{1u}$ and $a_{2u}$, producing a mixed orbital character. Being consistent with these electronic structural changes of $O=Ti^{(IV)}$ TSPP in LDH, both the fluorescence spectral change and the fsdiffuse reflectance transient measurements imply that the photoexcitation of the $O=Ti^{(IV)}$ TSPP intercalated into LDH undergoes fast relaxation to the O=Ti(IV) $TSPP^+-LDH^- $charge transfer (CT) state within a few picoseconds, followed by a photoinduced electron transfer between the O=Ti(IV) TSPP and LDHs with a rate constant greater than %1×10^{10}S^{-1}$. No evidence is found for back electron transfer. In conclusion, the $O=Ti^{(IV)}$ TSPP intercalated LDH seems to be a possible candidate for an artificial reaction center for an efficient solar energy conversion system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.20-30
• /
• 1993

Liquid Chromatographic behavior of Pd(II) in Isonitosoethylacetoacetate imine IEAA-NR: R=H, CH3, C2H5, n-C3H7, n-C4H9, C6H5-CH2) Chelates were investigated by reversed phase high performance 1iquid chromatography on Micropak MCH-5 Column using Methanol /water as mobile phase. The optimum condition for the separation of Pd-Isonitrosoethylacetoacetate imine chelates were examined with respect to the flow rate, mobile phase strength. It was found that Pd(IEAA-NR)2 chelates were eluted in an acceptable range of the capacity factor value (0 $\leq$ log k' $\leq$ 1), The dependence of the logarithm of capacity factor(k') on the volume fraction of water in mixture with in the binary mobile phase was examined. Also, the dependence of k'on the liquid-liquid extraction distribution constant in methanol-water / n-alkane extraction system was on system was invert tigated for Pd(IEAA-NR)2. Both kinds of dependence are linear, which suggests that the retention of the electroneutral metal chelates be largely due to the solvophobic effect.

• Korean Journal of Clinical Pharmacy
• /
• v.12 no.2
• /
• pp.91-95
• /
• 2002

The pharmacokinetics of intravenous paclitaxel (1 mg/kg) were investigated in rabbits with renal failure induced by folic acid. The area under the plasma concentration-time curve from time zero to time infinity (AUC) of paclitaxel was significantly (p<0.05) greater in rabbits with severe renal failure induced by folic acid $(1030\pm382)$ compared to that in rabbits with in moderate renal failure induced by folic acid $(780\pm209\;ng/ml{\cdot}hr)$. The apparent volume of distribution (Vd) $(0.008\pm0.002\;L/kg)$ and the elimination rate constant $(\beta)\;(0.09\pm0.025\;hr^{-1})$ of paclitaxel in rabbits with severe renal failure were significantly (p<0.05) smaller and slower respectively than those of control rabbits $(0.016\pm0.004\;L/kg,\;0.12\pm0.03\;hr^{-1})$, but not significantly different compared with that in rabbits with moderate renal failure $(0.010\pm0.003\;L/kg,\;0.10\pm0.026\;hr^{-1})$. total body clearance (CL) of paclitaxel in rabbits with severe renal failure $(0.97\pm0.183\;L/hr/kg)$ was significantly (p<0.05) slower than that in control rabbits $(1.68\pm0.440\;L/hr/kg)$, but not significantly different compared with that in rabbits with in moderate renal failure $(1.28\pm0.311\;L/hr/kg)$. The terminal half-life ($t_{1/2}$) of paclitaxel in rabbits with severe renal failure $(7.46\pm2.16\;hr)$ was significantly (p<0.05) longer than that in control rabbits $(5.75\pm1.44\;hr)$, but not significantly different compared to that in rabbits with moderate renal failure rabbits $(6.67\pm1.76\;hr)$. The above data could be at least partly decrease in due to paclitaxel excretion in rabbits with renal failure, since $7-15\%$ of interavenous paclitaxel was excreted via kidney as unchanged forms plus its metablites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1211-1218
• /
• 2007

The aim of this study was to compare the fermentability and characteristics of fermented broths for white ginseng, red ginseng and extruded white ginseng at $110^{\circ}C$ (A), $120^{\circ}C$ (B) and $130^{\circ}C$ (C). The scanning electron microphotograph of B and C was uniform aircell distribution, but A had increased pore size and exploded some aircell's wall. Saccharification rate constant of C was the highest (10.123 $mg/mL·hr^{1/2}$). Fermentation temperature was $27^{\circ}C$ for 30 days and the cultivation was fixed with Saccharomyces cerevisiae, Aspergillus usamii, and Rhizopus japonicus. The pH of red ginseng fermented broth was 3.79, which was the highest among the fermented samples. The fermented broth of B had the highest acidity (4.46%). The fermented broth of A had the highest reducing sugar content in ginseng suspensions (32.36 mg/mL). In ginseng fermented broths, reducing sugar content was decreased rapidly during the initial 5 days and alcohol content was increased during the initial 5 days. On the fifth day, the fermented broth of C showed the highest alcohol content (5.20%).

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.477-481
• /
• 2022

As a part of improving the quality of crude methylnaphthalene (CMNO), this study was experimentally examined the reduction of nitrogen-containing compounds (NC) present in the CMNO by solvent extraction. The CMNO was composed of three kinds of NC [quinolone (QU), iso-quinoline (IQU), indole (IN)], three kinds of bicyclic aromatic compound [BAC; naphthalene (NA), 1-methylnaphthalene (1MNA), 2-methylnaphthalene (2MNA)] and biphenyl (BP) etc., in addition to an aqueous formamide solution, which were used as raw materials and a solvent, respectively. The increase in the volume fraction of water to the solvent in the initial state (y_w,0) caused a sharp decrease in the distribution coefficient and the yield of NC, but conversely raised the increased selectivity of NC based on 2MNA. The compositions of QU, IQU and IN in the raffinate oil recovered through the equilibrium extraction of batch co-current 5-stage under constant conditions [y_w,0 = 0.1, volume fraction of solvent to feed (CMNO) at the initial state = 1, operating temperature = 303 K, liquid-liquid contacting time = 72 h] were reduced by about 51.5%, 55.2%, and 71.8%, respectively, when compared to those of CMNO. From the excellent reduction rate of NC, the formamide extraction method suggested in this study can be expected to be a useful reduction method for NC contained in the CMNO.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.23-32
• /
• 2010

This study was especially conducted to find out the characteristics of the lightweight air-mixed soil (slurry density 10 kN/$m^3$) containing silt related to water. Compression strength, permeability, and capillary height of the lightweight air-mixed soil were studied, and also to support these studies, the structure of that soil was analyzed in detail. Air bubbles of various sizes are inside the lightweight air-mixed soil, and its distribution in a location is almost constant. A numerous tiny pores are inside the air bubbles so that the lightweight air-mixed soil can be saturated with water. Porosity is also estimated through the image analysis. Peak strength of the lightweight air-mixed soil is not dependent on water, but behavior of stress-strain is affected by the water. Permeability is about $4.857{\times}10^{-6}cm/sec$, which is a little bit higher than the clay's permeability. Capillary rise occurs rapidly at the beginning of the test until the lapse of 100 minutes and then its increase rate becomes slow. The capillary rise causes the increase of the density of the lightweight air-mixed soil, and thus it is required to pay attention to this phenomenon during structure design and maintenance of the lightweight air-mixed soil.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.312-318
• /
• 2018

We investigated the effect of postharvest treatments of calcium chloride, lysophosphatidyl ethanolamine (LPE) or 1-methylcyclopropene (1-MCP) on fruit quality during simulated marketing in Asian pear (Pyrus pyrifolia Nakai). 'Whangkeumbae' pear fruits were immersed in 0.25, 0.5 or 1.0% $CaCl_2$ solution with or without ultrasound (40kHz) at $25^{\circ}C$ for 3min followed by storage at $1^{\circ}C$ for 30 days simulated as abroad exportation. After simulated marketing at $25^{\circ}C$ and 80% relative humidity (RH) up for 10 days, quality parameters were evaluated. Results indicated that the ultrasound and $CaCl_2$ treatment had a synergic effect on keeping the green skin color which showed lower $a^*$ value. The combination treatment of ultrasound and 0.5% and 1.0% $CaCl_2$ significantly reduced internal browning disorders, although severe skin blemish disorder (20-23%) occurred in 1.0% $CaCl_2$ treatment. 'Wonhwang' pears were immersed in 1,000ppm LPE for 3 minutes or were fumigated in 1,000 ppb 1-MCP for 12 hours, respectively. The results of the fruit quality survey during the 21 days of distribution period are as follows. The 1-MCP treatment was maintained at a constant flesh firmness of 33N or higher during the distribution period. The LPE treated fruits had a lower physiological disorder index than the untreated group, but showed a relatively higher value than the 1-MCP treated group. In the case of 1-MCP treatment, the fruit respiration rate was significantly lower than of untreated control ($6.0mL{\cdot}kg^{-1}{\cdot}hr^{-1}$) during the simulaed marketing period. Consequently, it was expected that the postharvest treatments of 0.5% calcium chloride in pararell with ultrasound and 1-MCP fumigation can help to maintain Asian pear quality during distribution period.