• 한국환경과학회지
• /
• 제28권12호
• /
• pp.1157-1169
• /
• 2019

We used numerical models to reliably analyze the groundwater flow and hydraulic conductivity on Jeju Island. To increase reliability, improvements were made to model application factors such as hydraulic watershed classification, groundwater recharge calculation by precipitation, hydraulic conduction calculation using the pilot point method, and expansion of the observed groundwater level. Analysis of groundwater flow showed that the model-calculated water level was similar to the observed value. However, the Seogwi and West Jeju watersheds showed large differences in groundwater level. These areas need to be analyzed by segmenting the distribution of the hydraulic conductivity. Analyzing the groundwater flow in a sub watershed showed that groundwater flow was similar to values from equipotential lines; therefore, the reliability of the analysis results could be improved. Estimation of hydraulic conductivity distribution according to the results of the groundwater flow simulation for all areas of Jeju Island showed hydraulic conductivity > 100 m/d in the coastal area and 1 - 45 m/d in the upstream area. Notably, hydraulic conductivity was 500 m/d or above in the lowlands of the eastern area, and it was relatively high in some northern and southern areas. Such characteristics were found to be related to distribution of the equipotential lines and type of groundwater occurrence.

• 한국작물학회지
• /
• 제46권1호
• /
• pp.57-63
• /
• 2001

Barley Yellow Dwarf Virus (BYDV) has been a major disease causing a severe loss of yield in winter cereals worldwide. It has been recently reported that BYDV occurs frequently in wheat field and also causes serious yield reduction in Korea. This study was performed to investigate the regional distributions of BYDV strains in Korea and to identify the resistant cultivars or lines of wheat to the predominant BYDV strains, providing basic information for the breeding of BYDV-resistant wheat varieties. Using RT-PCR and EcoRI digestion methods, the regional distribution of BYDV strains in Korea from 1999 to 2000 showed that PAV strain was mainly detected about 65% (Vic-PAV 52.6% ; CN-PAV 47.4%) and MAV strain about 3%. Using ELISA test for the examination of BYDV resistance with 17 cultivars and 4 lines among Korean wheat, three cultivars, Gurumil, Topdongmil, and Olgurumil, were susceptible to BYDV and the others were resistant. In plant growth and yield component responses to BYDV infection, Gurumil showed significant difference between the uninfected and the infected, suggesting the most susceptible to BYDV among Korean wheat, but Eun-pamil and Seohae118 did no difference, an indication that they have the highest resistance.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.241-248
• /
• 2021

High cycle fatigue life for the cables with two different types of clamps is estimated comparatively through acceleration testing. The high cycle fatigue fracture of overhead lines is caused mainly by the aeolian vibration which is induced by vortex shedding. It is necessary to manage the integrity of cables continuedly considering that the aeolian vibration is unavoidable since it occurs in steady and relatively low wind velocity. Two types of clamps which are largely used for overhead lines of the distribution grids are selected and failure data are obtained by step stress testing with a electrodynamic shaker with them. The inverse power law is assumed to describe the stress-life relationship and the fatigue limit at any specified life is supposed to follow Weibull distribution. The life of the cable is defined as the number of cycles to the time that one of strands is completely broken. Finally, the fatigue limits of the cables with two clamp types are estimated at the reference life of 500 Mcycles and compared each other based on a bending vibration amplitude.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권12호
• /
• pp.670-677
• /
• 2004

The Conventional approach for estimating the locations of transmission line shunt faults has been to measure the apparent impedance to the fault from a line terminal and to convert the reactive component of the impedance to line length. But, these methods do not adequately address the problems associated with the fault location on distribution systems. This thesis presents a technique that estimates the location of shunt fault on a radial distribution system that has several single and multiphase laterals. Tapped loads and non-homogenity of the distribution system are take into account. The developed technique, which can handle shunt faults was tested to evaluate its suitability. Results from computer simulation of faults on a model of a 25KV distribution lines like real system are presented. The results approved that the proposed technique works well for estimating the locations of the distribution line shunt faults.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.89-95
• /
• 2010

A new live-line insulator tester was developed to detect faulty insulators in 154kV power transmission lines. This paper is the second part of the two-part paper and deals with its inspection algorithm development. Unlike normal condition with low pollution and low humidity, the inspection data measured in the field under high pollution or high humidity showed that the voltage distribution of an insulator string has offsets in comparison with those of others and its insulation resistances are greatly decreased, which leads to wrong results of the existing inspection algorithms under such conditions. To solve this problem, we propose new diagnosis algorithms that can exactly detect faulty insulators from measured data regardless of environmental conditions. Its effectiveness was validated by live-line field tests in actual power lines.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.134-137
• /
• 2006

Satisfying the customer orders with a short lead-time is one of the essential and competitive factors for business units under a mass customization environment. To shorten the lead-time for fulfilling various orders entails the production capacity expansion and efficient operational policy. Most business firms utilize the multiple production lines or facilities to cope with this business and manufacturing environment by making the manufacturing and distribution more flexible. In this study, we introduce the operational problem determining the joint production and delivery policy in an environment where multiple products are manufactured with more than one production lines. Also, we propose the heuristic solution approach for determining the product-line selection and joint lot size for this problem.

• Ocean and Polar Research
• /
• 제22권1호
• /
• pp.15-23
• /
• 2000

The community structure of meiobenthos was studied in tidal flats of Kanghwado in November, 1997. Nematodes were the most dominant group among 18 total meiofaunal groups at most stations except for at lower tidal flats where the most abundant groups were harpacticoid copepods. Meiobenthos were the most abundant in the upper 1cm and their density decreased depending on the depth from the surface. The highest density of the meiobenthos was 6,094 inds. $10cm^{-2}$ at the upper tidal flat, while the lowest was 1,524 ind. $10cm^{-2}$ at the lower tidal flat. The density was higher in general at the upper tidal flats, but decreased at the stations toward lower tidal flat at all transect lines. At all transect lines, nematodes decreased as stations were along toward lower tidal flat whereas harpacticoids increased. The values of N/C(nematodes/benthic harpacticoids) ratio were higher at the upper tidal flats than the lower tidal flats at all transect lines.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.247-250
• /
• 2003

This paper proposed to digital watermarking technique for architectural drawing using LINES and ARCs based on vertex in CAD system to prevent infringement of copyright from unlawfulness reproductions and distribution. After extract LINES and ARCs from designed drawing, we embed watermarks using adaptive algorithm in each characteristics. Watermarks robust to various attacks like as geometrical transformation as being embedded in LINE's length and ARC's angle information. Also, the proposed method satisfies enough transparency about watermarked drawing because have suitable embedding strength to each component. By experimental result, we confirmed robustness and invisibility of embedded watermarks in several conversions of architectural design drawing.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.29-39
• /
• 1990

In this paper we propose a nonparametric test for testing the equality of several regression lines against ordered alternatives, when the independent variables are positive and all regression lines have a common intercept. The proposed test is based on a Jonckheere-type statistic applied to residuals. Under some conditions our proposed test statistic is asymptotically distribution-free. The small-sample powers of our test are compared with other tests by a Monte Carlo study. The simulation results show that the proposed test has significantly higher empirical powers than the other tests considered in this paper.