• 물과 미래
• /
• 제29권4호
• /
• pp.177-186
• /
• 1996

하천 만곡부에서의 하상 횡경사 결정은 유수와 유수의 소류력에 의해 변동하는 하상면과의 상호관계를 규명하는 이론적인 접근에서 출발하게 된다. 이러한 경우 흐름은 완전히 발달한 흐름으로 해석하게 되며 하상에서는 소류사가 일어나고 있는 상태에서 유수력과 하상물질에 의한 저항력간의 평형을 바탕으로 해석을 시도하게 된다. 한계소류력을 대표하는 연구로서 Shields diagram이 많이 이용되고 시동조건으로 Shields parameter를 0.06으로 대표해 주고 있다. 지금까지 만곡부의 하상횡경사 결정에서는 대부분의 방법들이 Shields parameter 의 적용에서 0.06을 일률적으로 채택하고 있다. 본 연구에서는 Shields parameter에서의 실험조건인 균일입경하상이라는 조건이 적용되지 않는 일반 자연하천에서 혼합입경하상의 입도분포곡선 형태에 따라 생기는 Shields parameter의 변동을 고려할 수 있도록 하므로써 보다 정확한 만곡부 하상횡경사 추정이 가능한 방법을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1133-1137
• /
• 2000

Gibbs ensemble Monte Carlo simulations were performed to calculate the vapor- liquid coexistence properties for the binary mixtures $CO_2/C_3H8$, $CO_2/CH_3OCH_3$, and $CO_2/CH_3COCH_3.$ For all the molecules the potential between sites in different molecules was simply calculated by the Lennard-Jones potential. Density of the mixture, composition of the mixture, the pressure-composition diagram, the chemical potential of component, and the radial distribution function were calculated at vapor- liquid equilibrium. The composition and the density of both vapor and liquid from simulation agreed considerably well with the experimental values over a wide range of pressures. The radial distribution functions in the liquid mixtures showed that $CO_2$ molecules tended to form cluster with each other and $C_3H8$ molecules also aggregated each other due to the weak interaction between $CO_3$ and $C_3H8$ molecule. However the interaction potentials between the same components were similar to those between the different components in the liquid mixtures $CO_2/CH_3OCH_3$ and $CO_2/CH_3COCH_3$.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.164-171
• /
• 2023

Vibration and noise must be considered to maximize the efficiency of a yaw system and reduce the fatigue load acting on a wind turbine. This study investigated a method for analyzing yaw-system vibration based on the change in the load-duration distribution (LDD). A substructure synthesis method was combined with a planetary gear train rotational vibration model and finite element models of the housing and carriers. For the vibration excitation sources, the mass imbalance, gear mesh frequency, and bearing defect frequency were considered, and a critical speed analysis was performed. The analysis results showed that the critical speed did not occur within the operating speed range, but a defect occurred in the bearing of the first-stage planetary gear system. It was found that the bearing stiffness and first natural frequency increased with the LDD load. In addition, no vibration occurred in the operating speed range under any of the LDD loads. Because the rolling bearing stiffness changed with the LDD, it was necessary to consider the LDD when analyzing the wind turbine vibration.

• 환경생물
• /
• 제37권3호
• /
• pp.299-308
• /
• 2019

2012년 8월 1일부터 7일까지 한국 남해 연안의 목포에서 부산에 이르는 37개의 정점에서 채집된 Acartia속 요각류의 공간 분포 양상에 대하여 분석하였다. A. erythraea는 용존산소가 2 mg L^-1 이하인 반 폐쇄적인(가막만, 마산만)만에서 높은 출현 개체수를 보였다. A. sinjiensis는 엽록소-a 농도가 2 ㎍ L^-1 이상인 반 폐쇄적인 만에서 높은 출현 개체수를 보였다. A. ohtsukai는 수온 26℃ 이상, 염분 30 이하일 때 높은 출현 개체수를 보였다. A. hongi, A. hudsonica는 수온이 27℃ 이하, 용존산소 5 mg L^-1 이상인 해역에서 출현하였다. 이러한 결과 환경요인이 여름철 남해 연안에 출현하는 Acartia속 요각류의 공간적 분포에 영향을 미칠 수 있음을 시사하고 있다.

• 천문학논총
• /
• 제27권4호
• /
• pp.209-212
• /
• 2012

We present the results of the near-infrared (NIR) to mid-infrared (MIR) slit spectroscopic observations of the diffuse emission toward nine positions in the nearby irregular galaxy Large Magellanic Cloud (LMC) with the Infrared Camera (IRC) on board AKARI. The unique characteristic of AKARI/IRC provides a great opportunity to analyze variations in the unidentified infrared (UIR) bands based on continuous spectra from 2.5 to $13.4{\mu}m$ of the same slit area. The observed variation of $I_{3.3}/I_{11.3}$ suggests destruction of small-sized UIR band carriers, polycyclic aromatic hydrocarbons (PAHs) in harsh environments. This result demonstrates that the UIR $3.3{\mu}m$ band provides us powerful information on the excitation conditions and/or the size distribution of PAHs, which is of importance for understanding the evolutionary process of hydrocarbon grains in the Universe. It also suggests a new diagnostic diagram of two band ratios, such as $I_{3.3}/I_{11.3}$ versus $I_{7.7}/I_{11.3}$, for the interstellar radiation conditions. We discuss on the applicability of the diagnostic diagram to other astronomical objects, comparing the LMC results with those observed in other galaxies such as NGC 6946, NGC 1313, and M51.

• 정보처리학회논문지D
• /
• 제10D권3호
• /
• pp.471-488
• /
• 2003

최근의 대부분의 정보시스템은 웹 기반 정보시스템이며 이의 개발과 유지보수시에 “웹 위기” 현상이 발생하고 있다 이를 해결하기 위해, 웹 엔지니어링 기술 중 웹 기반 비즈니스 프로세스로의 리엔지니어링 기술이 필요하다. 본 논문에서는 웹 기반 정보시스템으로의 이주와 웹 기반 비즈니스 프로세스 모형화를 위한, BPN(Business Process Net) 모형과 이를 이용한 리엔지니어링 휴리스틱스를 적용 예와 함께 제시한다. BPN모형은 베타분포형 확률 패트리넷이며 수행가능형 Activity diagram이라 할 수 있다. BPN을 모형화 할 때, Use Case 분석을 이용하며 비즈니스 프로세스의 수행시간 및 비용적 불확실성은 베타분포를 이용하고 있다. BPN 모형은 XML 기반의 비즈니스 프로세스의 명세언어를 위한 공통 명세모형으로 이용될 수 있으며, 제시한 리엔지니어링 방법 및 지침은 웹 기반 정보시스템의 분석 및 설계단계에서 적용할 수 있다.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.

• 천문학회보
• /
• 제36권2호
• /
• pp.143.1-143.1
• /
• 2011

Deep Ca,b,y images obtained from the CTIO 4m Blaco telescope are used to investigate the multiple stellar populations of red giant branch (RGB) and sub-giant branch (SGB) in Galactic globular clusters NGC 6656 and NGC 6723. For NGC 6656, confirming the result of Lee et al. (2009), we find two discrete populations of the RGB stars of which mean color separation is about 0.2 mag in hk[=(Ca-b)-(b-y)] index. Furthermore, we also find the bimodel distribution of the SGB stars in (hk, y) color-magnitude diagram. A new finding is that the (hk, y) color-magnitude diagram of NGC 6723 shows two distinct RGB stars with different calcium abundances of which mean color separation is about 0.12 mag in hk index. This multiple stellar feature has not been observed in previous observation, suggesting that NGC 6723 may also be a possible relic of dwarf galaxies that merged into the Milky Way in the past. Thus our result adds further constraints to the merging scenario of the Galaxy formation. Unfortunately, the split of SGB stars in NGC 6723 is not obvious. We will present some statistical results to compare properties of two populations in two clusters.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.211-235
• /
• 2004

Component based design is perceived as a key technology for developing advanced real-time systems in a both cost- and time effective manner. Already today, component based design is seen to increase software productivity, by reducing the amount of effort needed to update and maintain systems, by packaging solutions for re-use, and easing distribution. Nowdays, a thousand and one companies in If(Information Technology) industry such as Sl(System Integration) and software development companies, regardless of scale of their projects, has spent their time and endeavor on developing reusable business logic. The component software is the outcome of software developers effort on overcoming this problem; the component software is the way propositioned for quick and easy implementation of software. In addition, there has been lots of investment on researching and developing the software development methodology and leading If companies has released new standard technologies to help with component development. For instance, COM(Component Object Model) and DCOM(Distribute COM) technology of Microsoft and EJB(Enterprise Java Beans) technology of Sun Microsystems has turned up. Component-Based Development (CBD) has not redeemed its promises of reuse and flexibility. Reuse is inhibited due to problems such as component retrieval, architectural mismatch, and application specificness. Component-based systems are flexible in the sense that components can be replaced and fine-tuned, but only under the assumption that the software architecture remains stable during the system's lifetime. In this paper, It suggest that systems composed of components should be generated from functional and nonfunctional requirements rather than being composed out of existing or newly developed components. about implements and accomplishes the modeling for the Product Control component development by applying CCD(Contract-Collaboration Diagram), one of component development methodology, to MRP(Material Requirement Planning) System

• 한국환경과학회지
• /
• 제12권5호
• /
• pp.521-527
• /
• 2003

To study the intruded phenomena of North Pacific Ocean around Boso peninsular, water property distribution in the adjacent seas to Japan is studied using the hydrographic data obtained by Japan Maritime Agency and Japan Fisheries Agency from 1973 to 1996, The scattering of water type in T-5 diagram is relatively small in the Kuroshio Region. Both the envelopes of saline side and of fresh side of the scattered data points shifts gradually from saline side to fresh side as the observation Line moves from southwest to northeast. In mixed water region, the scattering of water type increases rapidly as the observation line moves north; the envelope of fresh cold side moves towards fresh cold side much faster than that of saline side. This suggests that the water does not advect along the salinity minimum layer, but the salinity minimum layer can be understood as a boundary of two different waters aligned vertically, We defined the typical water masses as the Oyashio Water and the Kuroshio Water. The water mass below the salinity minimum layer may be created by isopycnal mixing of these two water masses with a fixed mixing rate. While the water mass above the salinity minimum cannot be created simply by isopycnal mixing. The salinity minimum layer may be eroded from upper side due to active minxing processes in the surface layer, while the water of the salinity minimum layer moves gradually southward. This appears to give an explanation why the thermosteric anomaly value at salinity minimun decereases towards south.