• Journal of Korea Water Resources Association
• /
• v.39 no.10 s.171
• /
• pp.833-844
• /
• 2006

The objective of this study is to evaluate the snowmelt effects on the hydrological components, especially on the runoff, by using the soil water assessment tool(SWAT) which is a continuous semi-distributed long term rainfall-runoff model. The model was applied to the basin located in the upstream of the Chungju Dam. Some parameters in the snowmelt algorithm were estimated for the Chungju basin in order to reflect the snowmelt effects. The snowmelt effects were assessed by comparing the simulated runoff with the observed runoff data at the outlet of the basin. It was found out that the simulated runoff with considering the snowmelt component matches more satisfactorily to the observed one than without considering snowmelt effect. The simulation results revealed that the snowmelt effects were noticeable on March and April. Similar results were obtained at other two upstream gauging points. The effect of the elevation bands which distribute temperature and precipitation with elevation was analyzed. This study also showed that the snowmelt effect significantly affects the temporal distribution as well as quantity of the hydrological components. The simulated runoff was very sensitive to the change of temperature near the threshold temperature which the snowmelt can occur. However, the reason was not accounted for this paper, Therefore, further analyses related to this feature are needed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.245-251
• /
• 2014

As delineating market areas of retail businesses has become an interesting topic in marketing field, Lee and Lee recently suggested a noteworthy method, which applied the hydrological analysis of geographical information system (GIS), based on Christaller's central place theory. They used a digital elevation model (DEM) which inverted the kernel density of retail businesses, which was measured by using bandwidths of pre-determined 500, 1000 and 5000 m, respectively. In fact, their method is not a fully data-based approach in that they used pre-determined kernel bandwidths, however, this paper has been planned to improve Lee and Lee's method by using a kind of data-based approach of the L-index that describes clustering level of point feature distribution. The case study is implemented to automobile-related retail businesses in Seoul, Korea with selected Kernel bandwidths, 1211.5, 2120.2 and 7067.2 m from L-index analysis. Subsequently, the kernel density is measured, the density DEM is created by inverting it, and boundaries of market areas are extracted. Following the study, analysis results are summarized as follows. Firstly, the L-index can be a useful tool to complement the Lee and Lee's market area analysis method. At next, the kernel bandwidths, pre-determined by Lee and Lee, cannot be uniformly applied to all kinds of retail businesses. Lastly, the L-index method can be useful for analyzing the space structure of market areas of retail businesses, based on Christaller's central place theory.

• Journal of Biosystems Engineering
• /
• v.30 no.6 s.113
• /
• pp.340-346
• /
• 2005

Major quality features of the beef carcass in most countries including Korea are size, marbling state of the lean tissue, color of the fat and lean tissue, and thickness of back fat of the 13th rib. To evaluate the beef quality, extracting loin parts from the sectional image of the 13th beef rib is crucial and is the first step. However, because of the inhomogeneous distribution and fuzzy pattern of the fat and lean tissues on the beef cut, it is difficult to extract automatically the proper contour of the lean tissue. In this paper, a prototype mobile beef quality measurement system, which can be implemented practically at the beef processing site was developed. The developed system was composed of the hand held image acquisition unit and mobile processing unit mounted with touch-pad screen. Algorithms to extract the boundary of the lean tissue and a proper tool to evaluate the marbling status have been developed using color image processing. The boundary extraction algorithm showed successful results for the beef cuts with simple and moderate patterns of the lean tissue and fat. However, it had some difficulty in eliminating complex pattern of the extraneous tissues adhered to the lean tissue in the boundary extraction. The developed algorithms were implemented to the prototype mobile processing unit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3080-3086
• /
• 2009

We have analyzed the output characteristics of a LGP with pyramid shaped pattern by using a 3-D simulation tool. The influences on the LGP output of various parameters such as the pattern shape, pattern occupation ratio, pattern size, and etching angle were investigated. Comparing the pyramid shaped pattern with hemispherical patterns, little difference was observed. And, it was proved that the pattern occupation ratio and etching angle have relatively large effects on LGP output characteristics, while the pattern size has no effect. Therefore, we can improve the LGP characteristics by optimizing pattern structure and distribution.

• Journal of Information Management
• /
• v.42 no.4
• /
• pp.115-136
• /
• 2011

Recently, the cases of archiving for digital contents are being increased throughout the world. Owing to the characteristics of digital contents including the issues on volatile property and authenticity, preservation weakness, and aging in the reproductive tool, it requires special management for long-term preservation. A successful digital archiving seems to be possible in the stage-oriented practice through the cooperation of interested organizations based on the systematically established and stipulated policy. This is the basic study that was designed for the establishment of the policy on digital contents archiving in KISTI(Korea Institute of Science and Technology Information), which is a representative organization for the distribution of science and technology information. By investigating and analyzing the cases of overseas policies on digital contents archiving, it intended to understand the framework of digital archiving policy while suggesting measures on the macroscopic items that were included in the archiving policies through the interview conducted to expert groups.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.41-46
• /
• 2018

This study proves the causes of cylinder and piston jam by scratches which is the fatal problem of hydraulic breaker through the thermal analysis and thermal-structural coupled field analysis. The trouble from the scratch is a complex problem which can be caused by manufacturing process (this is an internal factor) and the users mistake or contamination in the hydraulic circuit (these are an external factor). Hence, it's not easy to investigate the causes, also hard to prevent the recurrence. In this reason, hydraulic breaker manufacturers are trying to improve the manufacturing process such as machining, heat treatment, grinding, cleaning, also to prevent the contamination in hydraulic circuit and to remove the remains. It's being managed thoroughly by manufacturers. This study shows the effect of the temperature rise by the frictional heat generated when the piston hits the tool on the hydraulic oil while the hydraulic breaker is operating, also the temperature distribution when it starts to affect main components of hydraulic breaker. The stress and the amount of deformation also could be found through thermal-structural coupled field analysis. It proved that the stress and deformation are proportionally increased according to the temperature rise in hit area, and it affects the cylinder and the viscosity of hydraulic oil inside the cylinder when it heats up beyond the certain temperature.

• Journal of Food Hygiene and Safety
• /
• v.18 no.3
• /
• pp.107-112
• /
• 2003

Probabilistic exposure assessment has been recognized as an important tool in microbial risk assessment, because of obtained the desired results to characterize of variability and uncertainty associated with the microbial hazards. In addition, it will be provided much more actuality information than the point-estimate approaches. In this study, we present methodology using mathematical probability distribution in exposure assessment and estimating of contamination level of Listeria monocytogenes in meat and meat products as a case study. The result of estimation contaminatin level was mean ($50^{th}$ percentile) -4.08 Log CFU/g minimum ($5^{th}$ percentile) -4.88 Log CFU/g, maximum ($95^{th}$ percentile) -3.56 Log CFU/g.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.551-563
• /
• 2007

Numerical analysis for flow characteristics of a twin skeg container ship was carried out according to skeg vertical angles($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) and skeg distances(16m, 20m, 24m) by using a commercial CFD code, FLUENT. Computed: pressure distributions, wake distributions and resistance coefficients have been compared with experimental and WAVIS results carried out by MOERI. Flow characteristics from numerical analysis such as nominal wake fractions, wake distribution and directions of the transverse vectors give good agreement with WAVIS results, even though there are quantitative discrepancy comparing with experimental measurements at the propeller plane. It is found that the better resistance performance can be obtained with the increase of the skeg vertical angle and the decrease of the skeg distance, which are mainly caused by viscous pressure resistance due to the skeg form and pressure recovery around the skeg. In addition, a vertical angle of the skeg gives more effect to the resistance coefficient comparing with the skeg distance. On the basis of results of the present study, it shows that numerical analysis using the commercial code, FLUENT, is useful and efficient tool for the evaluation of the complex stern hull form with twin-skegs.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.477-485
• /
• 2011

For the identifying of spatial distribution pattern, Moran's Index(I) which has the range of values from -1 to +1 is common method for the spatial autocorrelation measurement. When I is close to 1, all neighboring features have close to the same value, indicating clustered pattern. Conversely, if the spatial pattern is dispersed, I is close to -1. And I closing to 0 means spatially random pattern. However, this index equation is influenced by how defining the neighboring features for target feature. To compare and understand the difference of neighborhood definition methods, fixed distance neighboring method and Gabriel Network method were used for I. In this study, these two methods were applied to two marine environments with water quality data. One is Gwangyang Bay which has complex geometric coastal structure located in South Sea of Korea. Another is Uljin area adjacent to open sea located in east coast of Korea. The distances between water quality observed locations were relatively regular in Gwangyang Bay, however, irregular in Uljin area. And for the fixed distance method popular Arc GIS tool was used, but, for the Gabriel Network, Visual Basic program was developed to produce Gabriel Network and calculate Moran's I and its Z-score automatically. According to this experimental results, different spatial pattern was showed differently for some data with using of neighboring definition methods. Therefore there is need to choose neighboring definition method carefully for spatial pattern analysis.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2004

This paper describes a method of detecting formation boundaries, and permeable fractures, from frequency-domain Stoneley wave logs. Field data sets were collected between the depths of 330 and 360 m in well EE-4 in the Higashi-Hachimantai geothermal field, using a monopole acoustic logging tool with a source central frequency of 15 kHz. Stoneley wave amplitude spectra were calculated by performing a fast Fourier transform on the waveforms, and the spectra were then collected into a frequency-depth distribution of Stoneley wave amplitudes. The frequency-domain Stoneley wave log shows four main characteristic peaks at frequencies 6.5, 8.8, 12, and 13.3 kHz. The magnitudes of the Stoneley wave at these four frequencies are affected by formation properties. The Stoneley wave at higher frequencies (12 and 13.3 kHz) has higher amplitudes in hard formations than in soft formations, while the wave at lower frequencies (6.5 and 8.8 kHz) has higher amplitudes in soft formations than in hard formations. The correlation of the frequency-domain Stoneley wave log with the logs of lithology, degree of welding, and P-wave velocity is excellent, with all of them showing similar discontinuities at the depths of formation boundaries. It is obvious from these facts that the frequency-domain Stoneley wave log provides useful clues for detecting formation boundaries. The frequency-domain Stoneley wave logs are also applicable to the detection of a single permeable fracture. The procedure uses the Stoneley wave spectral amplitude logs at the four frequencies, and weighting functions. The optimally weighted sum of the four Stoneley wave spectral amplitudes becomes almost constant at all depths, except at the depth of a permeable fracture. The assumptions that underlie this procedure are that the energy of the Stoneley wave is conserved in continuous media, but that attenuation of the Stoneley wave may occur at a permeable fracture. This attenuation may take place at anyone of the four characteristic Stoneley wave frequencies. We think our multispectral approach is the only reliable method for the detection of permeable fractures.