• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.61-65
• /
• 2014

Pressure distribution around rotating impeller blades in centrifugal pump has been main issue for design of efficient and high performance automotive water pump. In addition, pressure losses of inlet water pipes should be considered to reduce additional pressure drop and design high performance engine cooling system. In this paper, pressure distribution inside water pump and pressure drop between inlet and outlet of water pump are investigated numerically to design plastic water pump for clean diesel engine application. And the inlet geometry of water pump was considered to analysis the effect of inlet water pipe geometry on pressure distribution around impeller blades and outlet pressure. The prediction results are compared with experimental data to validate and determine optimal operation condition without water pump cavitation. Major design parameters such as blade angle, volute geometry, system pressure, and coolant flow rate are considered to confirm applying possibility of plastic blades to the clean diesel engine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.183-185
• /
• 2004

Despite high cost, the underground power distribution system has been preferred by utilities and customers due to its stability and good living environment. Utilities, however, are burdened with the cost of installation as the service region of underground power system is getting enlarged. In this paper, a design method is proposed in order to reduce the construction cost of underground distribution system. That is an optimum algorithm, which can increase the total number of pipes in a limited space compared with a conventional design method. As a result, the proposed design method can reduce efficiently the construction cost of underground distribution system.

• Management Science and Financial Engineering
• /
• 제5권2호
• /
• pp.25-41
• /
• 1999

This paper generalizes the classic two-stage multicommodity distribution system design problem to the one that includes plant locations as well as distribution center locations. Accommodating plant location leads to subproblems which are mixed are mixed integer. Hence. no LP-type subproblems are avail-able, and therefore standard Benders decomposition no longer applies. We develop new solution method which combines an integer L-shaped method with Benders decomposition to suit the purpose, and pre-sent the test results.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1942-1948
• /
• 2010

Recently, the radial distribution system is operating as one-way power flow. These are popular because of their simple design and relatively low cost. However, radial systems are sensitive to outages due to single contingencies. Also, reliability of supply is becoming increasingly important. Accordingly, an appearance of the loop distribution system is inevitable and the other countries such as Macau, Florida, Taiwan are actively working on. The reliability of distribution system is estimated with reliability indices. In this paper, comparing with the radial distribution system, we evaluate and analyse the reliability of loop distribution system quantitatively considering directional relay.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.50-56
• /
• 2003

Most engineering products contain more than one component. Failure occurs either at the connection itself or in the component at the point of attachment of the connection in many engineering structures. The allocation and design of connections such as bolts, spot-welds, adhesive etc. usually play an important role in the structure of multi-components. Topology optimization of connection component provides more practical solution in design of multi-component connection system. In this study, a topology optimization based on density distribution approach has been applied to optimal location of fasteners such as T-shape, L-shape and multi-component connection system. From the results, it was verified that the number of iteration was reduced, and the optimal topology was obtained very similarly comparing with ESO method. Therefore, it can be concluded that the density distribution method is very suitable for topology optimization of multi-component structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1137-1139
• /
• 1998

Effective database is the key to manage automatic distribution system. Currently, automatic distribution system database has been studied with a relational concept. But, it is hard to describe the characteristic of automatic distribution system data which require real time management and composite type. This paper present the way how to design conceptual schema for EMS database using object-oriented concept which is free to decribe composite data type and support inheritance concept.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.239-242
• /
• 2009

Power Control and Distribution Unit (PCDU) plays roles of power generation control for solar array panel, power storage control for battery system, power conversion for unregulated and regulated primary bus and power distribution to bus and payload system. The selection and design of the proper auxiliary power interface for PCDU depending on various mission is one of the most important step for electrical power subsystem design. In this paper, the general design approach of auxiliary power interface for PCDU which can be used for small-sized LEO satellites application is given. And, the auxiliary power design concept for always alived modules such as solar array regulator and house keeping module is also suggested.

• Asia pacific journal of information systems
• /
• 제6권1호
• /
• pp.165-194
• /
• 1996

Data distribution is one of the most important steps in distributed database design. This paper proposes a methodology for distributing database by using a relational schema as an input. A design support system called DBDD (Database Distribution Design) is implemented within the framework of this methodology. The methodology consists of three phases such as (i) schema analysis, (ii) fragmentation, and (iii) allocation. In the schema analysis phase, all the table names are acquired from a global relational schema. In the fragmentation phase, fragments are generated according to transaction retrieval patterns. Furthermore, DBDD enhances the design quality by allocating fragments in a progressive manner. A real-life case is illustrated to demonstrate the practical usefulness of the DBDD.

• 물과 미래
• /
• 제27권4호
• /
• pp.161-171
• /
• 1994

관수로시스템 최적설계는 수리학적 및 시스템 운영제약조건 아래서 시스템의 전체비용을 최소비용으로 구하는 것이다. 본 연구에서는 논관개용 수지상배관 시스템설계에 관해 상술하였다. 이는 선형계획론을 이론적 배경으로 하여 관로의 비용과 에너지비용을 함께 고려함으로서 시스템 전체비용으로 구하는 것을 시도하였으며 논 관개용 관수로시스템 설계에 있어서 두 개의 수요양상과 가압펌프를 고려함으로서 전체 시스템의 최소비용을 구하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권1호
• /
• pp.6-10
• /
• 2023

2 K superfluid helium cryogenic system is the crucial component of many large accelerators. When the cryogenic system is operating at 2K@3129Pa, many room-temperature parts are connected to superfluid helium via tubes. Air Leakage in these connections may lead to air contamination of the cryogenic system. Air contamination may cause equipment failure in cryogenic systems and, in extreme cases, render the entire accelerator system inoperable. Helium guard is a technique that guards against air contamination of these sub-atmospheric pressure connections in 2 K superfluid helium cryogenic system. This paper introduces a typical 2 K cryogenic distribution design for large accelerators, and make risk analysis of air contamination. Finally, the analysis of specific leakage points and detailed engineering design are presented, which may be used as a reference when designing of a 2 K superfluid helium cryogenic distribution system.