• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.56-62
• /
• 2020

The purpose of this study is to observe the visualization of the flow field for air flow distributed in the car from the ventilation fan installed in the ceiling of the passenger elevator car through the numerical analysis using computational fluid dynamics. STAR-CCM+, which is a code used for the numerical analysis, was used to predict the airflow distribution inside the elevator car. The numerical analysis of the distribution of the air current in the elevator was carried out. As a result, the analysis results for each point and the visualization of the air current distribution and the temperature distribution in the elevator car and were obtained. It was found that heat transfer was actively occurring inside the car due to the influence of the flow field discharged from the ventilation vent installed in the ceiling in the elevator car, and especially the convection heat transfer of Model-2 was more active than that of Model-1. As a result, the temperature distribution inside the car was found to be relatively low. In addition, the temperature distribution at a cross-section of 1700mm height in the elevator car shows that Model-2 is the location of the ventilation vent which makes people feel more comfortable.

• 유통과학연구
• /
• 제20권4호
• /
• pp.51-63
• /
• 2022

Purposes: The purpose of this study is to develop and test a possible model that investigates the relationships between green investment, CSR disclosure, social collaboration initiatives, and firm distribution performance to deal with environmental change because it's become the major stakeholder since it affects increasingly global company performance index. Research methodology: In this study a quantitative method was adopted. The 220 respondents were owners and managers of manufacturing enterprises from Indonesia. The structural equation model (SEM) was used to test the hypotheses, and the Partial Least Square (SmartPLS) was used as the data analysis tool. Findings: The study's finding shows that green investment has a significant effect on CSR disclosure, and CSR disclosure has a positive relationship with social collaborative initiatives and the firm's distribution performance. Similarly, social collaborative initiatives also significantly impact a firm's distribution performance. Limitations: This study uses variables that are still abstract and have not been able to regress the dimensions contained there into conclusion variables for each antecedent variable. In addition, this study only used a sample with a small scope, namely Central Java Province, Indonesia. Contribution: The findings of this study contribute to the body of literature in the field of organizational management and support the agency and stakeholder theories. For the practical contribution, this study provides the way to build and implement green-based investment strategies as a competitive edge and improve firm's distribution performance.

• 산업공학
• /
• 제9권3호
• /
• pp.225-235
• /
• 1996

The SECS Ⅰ and Ⅱ Protocol has been widely used for the TFT LCD and semiconductor industry. This paper shows how the SECS protocol is implemented for data communications between the Host (CAM) and the TFT LCD equipments. In addition, this study introduces a way to apply the SECS protocol to the manufacturing systems control. It provides better throughput in terms of production and faster control of the automated TFT LCD manufacturing system by way of shortcut and distribution of control and data communications. The SECS protocol is successfully used for the control of the real TFT LCD manufacturing system.

• East Asian Economic Review
• /
• 제26권4호
• /
• pp.257-277
• /
• 2022

Does servitization improve manufacturing firms' performance, and in what condition? Following the seminal work of Crozet and Milet (2017), this study analyzes disaggregated firm-level data that covers 40,000 South Korean manufacturing firms surveyed by the Survey of Business Activities of Korea. We compute firm-level servitization intensity with available sales data of each firm by two-digit SIC sub-sectors. We find two novel empirical regularities: Korean servitization intensity distribution shows a very different shape from the French benchmark; Servitized firms tend to perform higher profitability and higher productivity than non-servitized firms.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• 한국경영과학회지
• /
• 제29권3호
• /
• pp.9-21
• /
• 2004

Semiconductor industry is the one whose supply chain network is distributed all over the world. And it has different characteristics with other manufacturing industries as reentrancy, binning, substitution. In this paper, we suggest supply chain models for the semiconductor industry, consisting of production and distribution chains, where manufacturing characteristics are considered. Three policies for the production chain and two policies for the distribution chain are suggested and formulated mathematically. Six combination policies are tested for the evaluation of performances with example. It is shown that the supply chain is operated, if production and distribution are coordinated and managed based on the demand information, without inventory, as efficiently as the chain with inventory.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.102-108
• /
• 2013

In this study, the experiment result and numerical analysis on temperature distribution of a secondary battery module for high temperature operation type were compared. Because experimental battery has been in danger of explosions, experiment on temperature distribution was carried out using dummy batteries. Study on NAS battery module, which is secondary battery of high temperature operation type, is as follows ; Test result showed that battery's temperature is in steady state uniformly after 8 hours in each section. It is similar to experimental result for temperature distribution from the result of numerical analysis, and it takes about 8.5 hours to the $300^{\circ}C$.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.113-118
• /
• 1999

In order to evaluate strength of spot welded joint, at first it is importent that we should know strain distribution near nugget zone. During loading, in HAZ, compressive strain increase with Increase of load, but in nugget zone tensile strain increase. During unloading, on the other hand, even through the decreases, the strain variation is not almost appeared in nugget zone and HAZ. In nugget boundary zone, the strain range increases continuously along with load increase on outer surface, but the strain increases continunously and decreases rapidly beyond yield strength on inner surface. In this paper, strain distribution are measured in inner and outer surface with variation of thickness and load under tensile-shear load. Tensile-shear strength increased as with increase of specimen thickness. As for thickness increase rates are 25%, 50%, 100%, and 150%, tensile-shear strength in crease rates are 40%, 81%, 130% and 228%.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.395-400
• /
• 2009

As the variables affecting the fatigue behavior have uncertainty, the fatigue crack propagation is stochastic in nature. Therefore, the fatigue life prediction is critical for the design and the maintenance of many structural components. In this study, fatigue experiments are conducted on the specimens of magnesium alloy under the different thicknesses of specimen. The effects of specimen thickness on the probability distribution of the fatigue crack propagation life and the crack size are estimated experimentally. The probability distribution of the crack size and the fatigue life for different specimen thicknesses are investigated by Anderson-Darling test and the best fit for those probability distributions are also presented.

• 산업공학
• /
• 제16권spc호
• /
• pp.39-44
• /
• 2003

As one of many design variables, the role of dimension tolerances is to restrict the amount of size variation in a manufactured feature while ensuring functionality. In this study, a nonlinear integer model has been modeled to allocate the optimal tolerance to each individual feature at a minimum manufacturing cost. While a normal distribution determines statistically worst tolerances with its symmetrical property in many previous tolerance allocation studies, a asymmetrical distribution is more realistic because its mean is not always coincident with a process center. A nonlinear integer model is modeled to allocate the optimal tolerance to a feature based on a beta distribution at a minimum total cost. The total cost as a function of tolerances is defined by machining cost and quality loss. After the convexity of manufacturing cost is checked by the Hessian matrix, the model is solved by the Complex Method. Finally, a numerical example is presented demonstrating successful model implementation for a nonlinear design case.