• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.150-157
• /
• 2002

The number of required modes to provide accurate force information in a truncated model of a flexible structure is investigated. In the case of modal truncation of a distributed parameter system, the difference in convergence rates between displacements and forces is discussed. The residual flexibility. a term from past literature, is used to recapture some of the lost force information in a truncated model. This paper presents numerical and experimental results of a study where the residual flexibility is used in conjunction with a Kalman filter so that accurate force information may be obtained from a small set of displacement measurements wish a reduced-order model. The motivation for this paper is to be able to obtain accurate information about unmeasurable dynamic reaction forces in a rotating machine for diagnostic and control purposes.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.297-303
• /
• 2012

This paper presents the simulation results for the analysis of a lightning surge, switching transients and very fast transients within a thermal plant. The modeling of gas insulated substations (GIS) makes use of electrical equivalent circuits that are composed of lumped elements and distributed parameter lines. The system model also includes some generators, transformers, and low voltage circuits such as 24V DC rectifiers and control circuits. This paper shows the simulation results, via EMTP (Electro-Magnetic Transients Program), for three overvoltage types, such as transient overvoltages, switching transients, very fast transients and a lightning surge.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.375-383
• /
• 2021

We present a simulation method to design antireflection coating (ARCs) for fiber-coupled superconducting nanowire single-photon detectors. Using a finite-element method, the absorptance of the nanowire is calculated for a defined unit-cell structure consisting of a fiber, ARC layer, nanowire absorber, distributed Bragg reflector (DBR) mirror, and air gap. We develop a method to evaluate the uncertainty in absorptance due to the uncontrollable parameter of air-gap distance. The validity of the simulation method is tested by comparison to an experimental realization for a case of single-layer ARC, which results in good agreement. We show finally a double-layer ARC design optimized for a system detection efficiency of higher than 95%, with a reduced uncertainty due to the air-gap distance.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1799-1806
• /
• 1991

본 연구에서는 양단이 지지된 단순 모델을 사용하여, 양단 사이의 한 위치에 탄성지지를 할 때 고유진동수 변화를 검토하고 고유진동수를 높이는 방안을 제시하고 자 한다. 또한 분산변수계(distributed parameter system)을 사용하는 경우, 일반적 으로 홀수차항이 있는 미분방정식에서 그 해를 다항식, 고유벡터나 삼각함수의 무한개 의 합 등으로 표시하고 있으나 본 연구에서는 미분 방정식으로 표시하는 방법을 사용 하여 완전해(closed form solution)로 표시하여 구함으로서 오차를 제거하고 계산을 간결하게 하였다.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.365-372
• /
• 2017

Reliability analysis is a probabilistic approach to determine a safety level of a system. Reliability is defined as a probability of a system (or a structure, in structural engineering) to functionally perform under given conditions. In the 1960s, Basler defined the reliability index as a measure to elucidate the safety level of the system, which until today is a commonly used parameter. However, the reliability index has been formulated based on the pivotal assumption which assumed that the considered limit state function is normally distributed. Nevertheless, it is not guaranteed that the limit state function of systems follow as normal distributions; therefore, there is a need to define a new reliability index for no-normal distributions. The main contribution of this paper is to define a sophisticated reliability index for limit state functions which their distributions are non-normal. To do so, the new definition of reliability index is introduced for non-normal limit state functions according to the probability functions which are calculated based on the convolution theory. Eventually, as the state of the art, this paper introduces a simplified method to calculate the reliability index for non-normal distributions. The simplified method is developed to generate non-normal limit state in terms of normal distributions using series of Gaussian functions.

• Smart Structures and Systems
• /
• 제26권5호
• /
• pp.545-558
• /
• 2020

A design method of a Multiple Tuned Mass Damper (MTMD) system is presented for wind induced vibration control of a cable-supported roof structure. Modal contribution analysis is carried out to determine the dominating modes of the structure for the MTMD design. Two MTMD systems are developed for two most dominating modes. Each MTMD system is composed of multiple TMDs with small masses spread at multiple locations with large responses in the corresponding mode. Frequencies of TMDs are distributed uniformly within a range around the dominating frequencies of the roof structure to enhance the robustness of the MTMD system against uncertainties of structural frequencies. Parameter optimizations are carried out by minimizing objective functions regarding the structural responses, TMD strokes, robustness and mass cost. Two optimization approaches are used: Single Objective Approach (SOA) using Sequential Quadratic Programming (SQP) with multi-start method and Multi-Objective Approach (MOA) using Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The computation efficiency of the MOA is found to be superior to the SOA with consistent optimization results. A Pareto optimal front is obtained regarding the control performance and the total weight of the TMDs, from which several specific design options are proposed. The final design may be selected based on the Pareto optimal front and other engineering factors.

• 한국컴퓨터정보학회논문지
• /
• 제11권2호
• /
• pp.35-42
• /
• 2006

본 논문에서는 Parsec을 이용하여 병렬디지털신호처리용 분산공유메모리 다중처리시스템의 성능 분석을 위한 시뮬레이터를 구현한다. 이 시뮬레이터의 특징은 TMS320C6701 DSP 칩의 DMA 기능과 빠른 접근시간을 가진 지역메모리를 사용하는 시스템의 시뮬레이션에 적합하다는 것이다. 또한 시스템의 성능 매개변수 수정과 하드웨어 구성요소들에 대한 재구성이 쉽기 때문에 다양한 실행 환경에서 시스템의 성능을 분석할 수 있다. 시뮬레이션에서는 DSP 알고리즘에서 널리 사용하는 FET, 2D FET, Matrix Multiplication, Fir Filter를 사용하여 프로세서의 수 데이터 크기, 하드웨어 요소의 변화에 따른 실행 시간을 측정한다. 그리고 그 결과를 비교함으로써 본 논문에서 구현한 시뮬레이터의 성능을 검증한다.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.69-78
• /
• 2023

The purpose of this paper is to develop a scalable grey predictive controller with unavoidable random delays. Grey prediction is proposed to solve problems caused by incorrect parameter selection and to eliminate the effects of dynamic coupling between degrees of freedom (DOFs) in nonlinear systems. To address the stability problem, this study develops an improved gray-predictive adaptive fuzzy controller, which can not only solve the implementation problem by determining the stability of the system, but also apply the Linear Matrix Inequality (LMI) law to calculate Fuzzy change parameters. Fuzzy logic controllers manipulate robotic systems to improve their control performance. The stability is proved using Lyapunov stability theorem. In this article, the authors compare different controllers and the proposed predictive controller can significantly reduce the vibration of offshore platforms while keeping the required control force within an ideal small range. This paper presents a robust fuzzy control design that uses a model-based approach to overcome the effects of modeling errors. To guarantee the asymptotic stability of large nonlinear systems with multiple lags, the stability criterion is derived from the direct Lyapunov method. Based on this criterion and a distributed control system, a set of model-based fuzzy controllers is synthesized to stabilize large-scale nonlinear systems with multiple delays.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.1123-1141
• /
• 2016

To explore the application of traditional tuned mass dampers (TMDs) to the earthquake induced vibration control problem, a pounding tuned mass damper (PTMD) is proposed by adding a viscoelastic limitation to the traditional TMD. In the proposed PTMD, the vibration energy can be further dissipated through the impact between the attached mass and the viscoelastic layer. More energy dissipation modes can guarantee better control effectiveness under a suite of excitations. To further reduce mass ratio and enhance the implementation of the PTMD control, multiple PTMDs (MPTMD) control is then presented. After the experimental validation of the proposed improved Hertz based pounding model, the basic equations of the MPTMD controlled system are obtained. Numerical simulation is conducted on the benchmark model of the Canton Tower. The control effectiveness of the PTMD and the MPTMD is analyzed and compared under different earthquake inputs. The sensitivity and the optimization of the design parameters are also investigated. It is demonstrated that PTMDs have better control efficiency over the traditional TMDs, especially under more severe excitation. The control performance can be further improved with MPTMD control. The robustness can be enhanced while the attached mass for each PTMD can be greatly reduced. It is also demonstrated through the simulation that a non-uniformly distributed MPTMD has better control performance than the uniformly distributed one. Parameter study is carried out for both the PTMD and the MPTMD systems. Finally, the optimization of the design parameters, including mass ratio, initial gap value, and number of PTMD in the MPTMD system, is performed for control improvement.

• 한국수자원학회논문집
• /
• 제44권7호
• /
• pp.553-563
• /
• 2011

분포형 유출모형에 대하여는 컴퓨터의 발달과 지리정보시스템의 구축 및 관련정보의 제공이 활성화되면서 최근 많은 연구가 진행되고 있다. 이러한 분포형 유출모형은 대상유역을 보다 세분 요소화하여 계산하는 이론적이고 물리적인 기반의 모형이다. 본 연구에서는 토지피복 상태에 따라 결정되는 매개변수와 2차원 확산파 방정식에 기초하여 지표면에서의 유출량을 계산하는 모형을 개발하였다. 기존에 연구되었거나 개발 중인 유출모형은 대부분 Manning-Strickler의 평균 유속공식과 Manning 조도계수를 이용하여 유속과 유량을 산정하고 있다. Manning 조도계수는 사용상의 편의성 때문에 보편적으로 사용하고 있으나, 차원이 일치하지 않고 추정 시 모호한 문제점이 있다. 이러한 문제를 개선하기 위해 본 연구에서는 Manning-Strickler식뿐만 아니라 차원이 일치하는 Chezy의 평균유속공식을 적용하여 유출모형을 개발하였다. 또한, Chezy의 마찰계수를 적용하기 위하여 조고의 함수로 표현되는 지수형 마찰계수 산정식을 도입하였다. 따라서 모호한 조도계수의 개념을이용하지 않고 거친 정도를수치화하여 물리적인 의미를 가진마찰계수를 산정하고 적용 가능성을 검토하였다. 본 연구에서는 개발된 모형을 부채꼴 실험유역과 장방형 실험유역 및 실제유역인 안성천유역을 대상으로 6개의 사상을 적용하여 그 적용성을 확인하였다.