• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.279-290
• /
• 2004

The differential quadrature method (DQM) for a system of coupled differential equations governing the elastic stability of thin-walled curved members is presented, and is applied to computation of the eigenvalues of out-of-plane buckling of curved beams subjected to uniformly distributed radial loads including a warping contribution. Critical loads with warping, which were found to be significant, are calculated for a single-span wide-flange beam with various end conditions, opening angles, and stiffness parameters. The results are compared with the exact methods available. New results are given for the case of both ends clamped and clamped-simply supported ends without comparison since no data are available The differential quadrature method gives good accuracy and stability compared with previous theoretical results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.511-518
• /
• 2009

A lot of methods are proposed to provide services for object informations in distributed domain to satisfy the recent increase of user-centered services. This paper proposed a method called fuzzy drop manager for the service of reliable distribution application domain objects. The proposed system accesses the domain using replica parameter ci,j and access matrix Z, and evaluates the reference relatedness inside the domain using the relatedness, given by the mapping of intra-domain fuzzy relevance, between fuzzy sets. Objects in the domain generated an $\alpha$-level set according to the reference relatedness obtained by applying $\alpha$-level to extend queries. Simulation results showed that the proposed method has better performance than the other methods.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.106-112
• /
• 2011

This study developed preliminary assessment methodology for priority listing of soil and groundwater contamination sources, considering source characteristics, local environments and risk receptors. Source characteristics were evaluated by scoring relative risk of contamination sources. Local environments were evaluated by scoring annual rainfall, hydraulic conductivity of aquifer, and annual groundwater use. Risk receptors were evaluated by scoring local population, direct distance to surface water, direct distance to drinking-water wells. Scores of each parameter were allocated by analysing distribution of parameter values obtained from government databases. Distributed scores of source characteristics local environments: risk receptors were 12 : 12 : 12. The preliminary assessment scored 0 to 36 for each soil and groundwater sources. Inventory of soil and groundwater sources consisted of 7 categories. This study applied the preliminary assessment methodology to Manan-Gu, Anyang City, Korea. The number of car repair and washing facility was the largest in the contamination source inventory. Petroleum storage facilities showed the highest assessment score. The preliminary assessment methodology also indicated that Anyang-Dong was the priority section among Anyang-Dong, Suksu-Dong, Bakdal-Dong. This study is the first trial for relative ranking soil and groundwater contamination sources by considering source and local characteristics. Therefore, further researches and revision of the preliminary assessment methodology need to be pursued for various applications.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.159-166
• /
• 2010

For a grid-connected inverter in distributed generation systems, the current control is essential, and recently, the predictive current control based on a high performance digital signal processors (DSP) to satisfy a fast dynamic response has been widely investigated. However, the performance of predictive current control is degraded by the time delay due to digital implementation, the parameter and measured value errors and the interference of noise, and also theses make system even unstable. Therefore, this paper proposes the predictive current control using grid voltage observer for grid-connected inverter applications. To determine the relevant voltage observer gain, the low-order harmonics of grid voltage are considered, and the effect of filter parameter errors is analyzed. The proposed method has a fast current response capability, the robustness to noise and simple implementation due to voltage sensorless control and the robust current control performance to low-order grid harmonics. The feasibility of the proposed method is verified by simulation and experimental results.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.14-24
• /
• 2020

This paper aims to establish an efficient national R&D Application Programming Interface (API) management system for national R&D data-driven management and explore the possibility of using operational data according to the recent global data openness and sharing policy. In accordance with the trend of opening and sharing of national R&D data, we plan to improve management efficiency by analyzing operational data of the national R&D API service. For this purpose, we standardized the parameters for the national R&D APIs that were distributed separately by integrating the individual APIs to build a national R&D API management system. The results of this study revealed that the service call traffic of the national R&D API has shown 554.5% growth in the year as compared to the year 2015 when the measurement started. In addition, this paper also evaluations the possibility of using operational data through data preparation, analysis, and prediction based on service operations management data in the actual operation of national R&D integrated API management system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.88-95
• /
• 2000

In this paper, an expansion-resonator type pulsation attenuator is proposed to absorb and attenuate flow an pressure ripple with high frequencies generated from hydraulic control systems. The basic principle of a pulsation attenuator proposed here is applied to propagation, reflection, absorption of pressure waves at the cross section of discontinuity and resonance in the pipeline. It has advantage of the compact size and high degree fo freedom for installation in hydraulic systems. The design scheme based on distributed parameter pipeline system with dissipative viscous compressible model is developed. To investigate the reduction of flow and pressure ripple with high frequencies produced by swash plate type axial piston pump, two kinds of attenuators are manufactured. It is experimently confirmed that the spectral intensity of flow and pressure ripple with high frequencies from the pump are reduced up to about 20$^{\circ}$~30dB by using attenuators proposed here. The calculated results were in good agreement with the measured values. From there sults of this study, it is shown that an expansion-resonator type pulsation attenuator is effective in a wide frequency ranges to attenuate the flow and pressure ripple from hydraulic components.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.145-152
• /
• 1999

JPL(Jet Propulsion Laboratory) has been routinely produced the precise GPS ephemeris and clock's correction parameter using data collected from globally distributed permanent GPS tracking stations, and has been offering the automated GPS data analysis(Precise Point Positioning： PPP) service by using them. In this study, after investigating the potential capacity of JPL's PPP service, the coordinates computation of the GPS base station by this service were investigated. For this, the dual frequency P codes data of 24 hours were observed from continuously operating four reference stations in USA. sent to the JPL's main computer through E-mail and/or ftp, and then were processed by Gipsy/Oasis-II (GOA-II) software with the precise GPS transmitter parameters. Centimeter-level positioning results were available to obtain in X, Y, Z geocentric rectangular coordinate system.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.1065-1084
• /
• 2016

The analysis and design of skeletal structures is greatly influenced by the behaviour of beam-to-column connections, where patented designs have led to a wide range of types with differing structural quantities. The behaviour of beam-to-column connections plays an important role in the analysis and design of framed structures. This paper presents an overview of the influence of connection behaviour on structural stability, in the in-plane (bending) mode of sway. A computer-based method is presented for geometrically nonlinear plane frames with semi-rigid connections accounting for shear deformations. The analytical procedure employs transcendental modified stability functions to model the effect of axial force on the stiffness of members. The member stiffness matrix were found. The critical load has been searched as a suitable load parameter for the loss of stability of the system. Several examples are presented to demonstrate the validity of the analysis procedure. The method is readily implemented on a computer using matrix structural analysis techniques and is applicable for the efficient nonlinear analysis of frameworks. Combined with a parametric column effective length study, connection and frame stiffness are used to propose a method for the analysis of semi-rigid frames where column effective lengths are greatly reduced and second order (deflection induced) bending moments in the column may be distributed via the connectors to the beams, leading to significant economies.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.411-416
• /
• 1999

The measurement of unsteady flow rate is of vital importance to clarify and improve the dynamic characteristics in pipeline, hydraulic components and system. There is also demand for a real time flow sensor of ability to measure unsteady flow rate with high accuracy and fast response to realize feedback control of flow rate in fluid power systems. In this paper, we propose an approach for estimating unsteady flow rate through a pipeline and components under high pressure condition. In the method, unsteady flow rate is estimated by using hydraulic pipeline dynamics and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-checking functions of the method, the validity is investigated by comparison with the measured and estimated pressure waveforms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate waveforms and theroetical those under unsteady laminar flow conditions. the method proposed here is useful in estimating unsteady flow rate through an arbitray cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1257-1263
• /
• 1998

To realize a highly reliable satellite-base data distribution system efficiently, a hierarchical distributed control network which utilizers a sub control station(SCS) in addition to a hub and a user station(US) is proposed and evaluated. The results show that there exists an optimum number of sub control stations that minimizes the polling processing time as a parameter of the processing time ratio between US-SCS and SCS-CS links. From a viewpoint of the control network cost, it is shown that the cost can be less compared to the conventional one, when the communication cost between the US and SCS is slightly reduced.