• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.618-638
• /
• 2022

The Middle Jurassic granite dike swarm intruding into the Paleoproterozoic banded gneiss is pervasively observed in Ueumdo, Hwaseong City, mid-western Gyeonggi Massif. Based on their cross-cutting relationships in a representative outcrop, there are four dikes (UE-A, UE-C, UE-D, UE-E), and depending on the direction, there are three granite dike groups, which are NW- (UE-A dike), NW to WNW- (UE-C dike), and NE-trending (UE-D and UE-E dikes). These granite dikes are massive, medium-to coarse-grained biotite granites, and their relative ages observed in outcrops are in the order of UE-A, UE-D (=UE-E), and UE-C. The geometric analysis of the dikes indicates that the UE-A and UE-C dikes intrude under approximately NE-SW trending horizontal minimum stress fields. The UE-A dike, which showed a relatively low average SiO2 content by major element analysis, is a product of early magma differentiation compared to other dikes; therefore, it is consistent with the relative age of each dike. The ²⁰⁶Pb/²³⁸U weighted mean ages for each dike obtained from SHRIMP zircon U-Pb dating were calculated to be 167 Ma (UE-A), 164 Ma (UE-C), 167 Ma (UE-D), and 167 Ma (UE-E), respectively. The samples of the UE-A, UE-D, and UE-E dikes showed very similar ages. The UE-C dike shows the youngest age, which is consistent with the results of the relative age in the outcrops and major element analysis. Therefore, the granite dikes intruded into the Middle Jurassic (approximately 167 and 164 Ma), coinciding with those of the Gyeonggi Massif, where the Middle Jurassic plutons are geographically widely distributed. This result indicates that the wide occurrence of the Middle Jurassic plutons on the Gyeonggi Massif was formed as a result of igneous activity moving in the northwest direction with the shallower subduction angle of the subducting oceanic plate during the Jurassic.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.157-168
• /
• 2008

Statement of problem: Over the past two decades, implant supported fixed prosthesis have been widely used. However, there are few studies conducted systematically and intensively on the splinting effect of implant systems in mandible. Purpose: The purpose of this study was to investigate the changes in stress distributions in the mandibular implants with splinting or non-splinting crowns by performing finite element analysis. Materials and methods: Cortical and cancellous bone were modeled as homogeneous, transversely isotropic, linearly elastic. Perfect bonding was assumed at all interfaces. Implant models were classified as follows. Group 1: $Br{{\aa}}nemark$ length 8.5mm 13mm splinting type Group 2: $Br{{\aa}}nemark$ length 8.5mm 13mm Non-splinting type Group 3: ITI length 8.5mm 13mm splinting type Group 4: ITI length 8.5mm 13mm Non-splinting type An load of 100N was applied vertically and horizontally. Stress levels were calculated using von Mises stresses values. Results: 1. The stress distribution and maximum von Mises stress of two-length implants (8.5mm, 13mm) was similar. 2. The stress of vertical load concentrated on mesial side of implant while the stress of horizontal load was distributed on both side of implant. 3. Stress of internal connection type was spreading through abutment screw but the stress of external connection type was concentrated on cortical bone level. 4. Degree of stress reduction was higher in the external connection type than in the internal connection type.

• Journal of dental hygiene science
• /
• v.6 no.3
• /
• pp.207-212
• /
• 2006

In parallel with social and economic progress, motives of patients to consult dentists have increased and diversified. An increasing number of people visit dental clinics to improve their facial appearance and masticating functions deteriorated largely due to malocclusion. There is also greater interest in and concern as well as demand for teeth alignment treatment among people. Under this situation, it is required to find and suggest ways to enhance quality and profitability of dental care in view of managerial needs for dentists to cope with changing circumstances. This study, thus, aims to measure satisfactions of orthodontics patients and to determine the elements influencing their satisfactions. For this aim, a survey was performed for 20 days from March 7th to 26th, 2005 by means of questionnaires distributed to randomly selected samples, resulting in following conclusions: 1. From comparison of satisfactions with dental service by their elements, higher satisfaction was reported from orthodontics patients in the element of dental hygienists(4.21). Least satisfaction, however, was found in the procedure for treatment and waiting hours(3.73). 2. By gender, male orthodontics patients turned out to be more satisfactory with dental service than females. In terms of intention for return visits, both male and female orthodontics patients showed higher satisfaction than non-orthodontics ones. 3. As for satisfaction with dental service by age of orthodontics and non-orthodontics patients, with regard to intention for return visit, orthodontics patients of all ages showed to have higher grade of satisfaction. 4. Regarding satisfaction with dental treatment by orthodontics and non-orthodontics patients by monthly income, Dental hygienist with intention for return visit, the higher the satisfaction of orthodontics patients. 5. In regard to satisfaction with dental treatment by education, higher satisfaction was expressed by orthodontics patients with elementary school education kept dentist, dental hygienist and internal and external environments. As a result from this study, we knew that dental service of the orthodontics patients is higher satisfaction than that of the non-orthodontics patients.

• Journal of Life Science
• /
• v.25 no.10
• /
• pp.1081-1090
• /
• 2015

Diabetes has been one of major health risks in industrialized countries. Allium hookeri is a wild herb distributed in India and Myanmar. The root of the plant has been used as food and medicine in Southeast Asia. We investigated Allium hookeri extract improves type 2 diabetes mellitus in C57BL/KSJ db/db obese mouse. C57BL/KSJ db/db obese mouse arise out of Type 2 diabetes and we treated Allium hookeri methanol extract 400 mg/kg (AH 400), 800 mg/kg (AH 800), positive control group (thiazolidinedine;TZDs) were administered orally for 8weeks. AH treated group normalized lipid enzyme system (triglyceride, total cholesterol, HDL-cholesterol and LDL-cholesterol) and serum glucose, HbA1c and plasma insulin level. AH treated group recovered β-cell damage by hyperglycemia and fatty liver disease. AH treated group significantly up regulated expression of Peroxisome proliferator-activated receptor gamma (PPAR-γ), pyruvate dehydrogenase kinase4 (PDK4), Sterol regulatory element-binding protein 1c (SREBP 1) and fork head box O1 (FOX 01) proteins in C57BL/KSJ db/db obese mouse liver. And we found that AH treated group decreased hepatic malondialdehyde formation in C57BL/KSJ db/db obese mouse liver. These results indicate that Allium hookeri methanol extract might be a potential anti-diabetic agent and could be useful in the treatment of type 2 diabetes mellitus.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.10-20
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. Materials and methods: The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and $2^{nd}$ premolars, 10 mm posterior to $2^{nd}$ premolars. Results: Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. Conclusion: The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment.

• Korean Security Journal
• /
• no.24
• /
• pp.91-123
• /
• 2010

The threat factors available for occurrence given G20 Summit Meeting are expected leader terrorism, hostage terrorism, bomb terrorism, public facilities terrorism, and aircraft terrorism. As for the threat groups, which are expected in Korea, the North Korea, Islam extremist group, and the group such as NGO organization of being opposed to international meeting are regarded as having possibility of causing hazard. Thus, the purpose of this study is to suggest VIP Security-measure plans in the main site in preparation for G20 Summit Meeting. Accordingly, each country in the world is adopting 'the principle of Triple Ring' in common. Thus, it elicited a coping plan by 1st line(inner ring) 2nd line(middle ring) 3rd line(outer ring) based on this principle, and proposed even an opinion together that will need to be reflected in light of policy for the VIP security measures. In conclusion, as for the VIP Security-measure plans in the main site in preparation for G20 Summit Meeting, In the inner ring(safety sector), first, an intercepting measure needs to be devised for a spot of getting into and out of vehicles given the Straight Street. Second, the Walking Formation needs to be reinforced boldly in the exposed area. In the middle ring(security sector), first, the control plan needs to be devised by considering particularity of the main site. Second, there is necessity for adopting the efficient security badge operation plan that is included RFID function within security badge. In the outer ring(aid protective sector), first, there is necessity of preparing for several VIP terrorisms, of collecting information and intelligence, and of reinforcing the information collection system against terrorism under the cooperation with the overseas information agency. Second, the urgent measure training in time of emergency needs to be carried out toward security agent event manpower. Third, to maintain the certain pace in VIP motorcade, the efficient traffic control system needs to be operated. Finally, as for what will need to be reflected in light of policy for VIP security measures, first, there is necessity for allowing VIP residence to be efficiently dispersed to be distributed and controlled. Second, there is necessity for allowing impure element to misjudge or attack to be failed by utilizing diverse deception operations. Third, according to the reorganization in North Korea's Organization of the South Directed Operations, the powerful 'military-support measure' needs to be driven from this G20 Summit Meeting. For this, the necessity was proposed for further reinforcing the front back defense posture under the supervision of the Ministry of National Defense and for positively coping even with detecting and removing poison in preparation for CBR (chemical, biological, and radio-logical) terrorism.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.57-82
• /
• 2008

The volcanic sequence of the late Cretaceous Moonyu volcanic mass which distributed in the southwestern part of Ryeongnam massif, can be divided into felsic pyroclastic rocks, andesite and andesitic pyroclastic rocks, rhyolite in ascending order. The earliest volcanic activity might commence with intermittent eruptions of felsic magma during deposition of volcaniclastic sediments. Explosive eruptions of felsic pyroclastic rocks began with ash-falls, to progressed through pumice-falls and transmitted with dacitic to rhyolitic ash-flows. Subsequent andesite and andesitic pyroclastic rocks were erupted and finally rhyolite was intruded as lava domes along the fractures near the center of volcanic mass. Petrochemical data show that these rocks are calc-alkaline series and have close petrotectonic affinities with subduction-related continental margin arc volcanic province. Major element compositions range from medium-K to high-K. Petrochemical variation within the volcanic sequence can be largely accounted for tractional crystallization processes with subordinate mixing. The most mafic rocks are basaltic andesite, but low MgO and Ni contents indicate they are fractionated by fractional crystallization from earlier primary mafic magma, which derived from less than 20% partial melting of ultramafic rocks in upper mantle wedge. Based on the stratigraphy, the early volcanic rocks are zoned from lower felsic to upper andesitic in composition. The compositional zonation of magma chamber from upper felsic to lower andesitic, is interpreted to have resulted from fractionation within the chamber and replenishment by an influx of new mafic magma from depth. Replenishment and mixing is based on observations of disequilibrium phenocrysts in volcanic rocks. REE patterns show slight enrichment of LREE with differentiation from andesite to rhyolite. Rhyolite in the final stage can be derived from calc-alkaline andesite magma by fractional crystallization, but it might have underwent crustal contamination during the fractional crystallization.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.291-312
• /
• 2014

This study is based on the theory of R.Caillois about element of play which is motivated to infant for studying Hangul. The ultimate goal of play has to be accompanied by pleasure. And learning means permanent changes from experiences for the individual's. Play and learning, these two elements are united to the genre of serious game since the GBL (game based learning) was lead. Most importantly, in order to achieve their own Hangul learning is the fun. Coupled with fun and learning has an important issue for flow because concentration is low in infants than adults. In this case study is to know about fun factor has been applied effectively to Hangul serious mobile game. 20 Infant Hangul mobile serious games of Google Android mobile game section were selected as a case study based on more than 10,000 downloads and user's review rate by April 22, 2014. After that is currently available on the market can play a variety of cases of infant learning Hangul from previous research of R.Caillois offers four categories of play. R.Caillois of Agon, Mimicry, Alea, Ilinx have unique characteristics in comparison with its functional characteristics Hangul four are present any role in Hangul serious mobile games. As a result of the cases selected and the rules of the game will include a maximum of two of the most common types of Agon. Each attribute of the play, rather than one single factor is applied to four kinds of game play performance when properties are distributed to experience together gave the best flow. As a result of this study will be a based research for infants Hangul serious mobile game reflects the properties of the elements of a fun game that you want to combine learning.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.162-171
• /
• 2014

As the foodservice industry is labor intensive, the efficient management of human resources is an essential element for improving operational efficiency. This study was designed to investigate the performance level of human resource management in self-operated school foodservices and to examine the relationship between human resource management, organizational commitment, and productivity. Whether these factors rated differently by employment and job types was also examined. Data were collected through questionnaires distributed to 60 dieticians and 240 cooks in Seongnam and Yongin. Frequency analysis, factor analysis, the t-test and multiple regression analysis were tested using Minitab. Human resource management practices rated highly in the dimension of employee training (3.51), followed by working environment (3.39), and turnover management (3.37). In contrast, reward management (1.73) and working condition (1.56) received the lowest score. Organizational commitment scored 3.65 points, and showed that dedication (3.82) was the highest score; however, self-esteem (3.50) was the lowest score. For human resource management, there were significant differences between employment types as full time workers (3.85) rated management more highly than part-time worker (3.43). Overall productivity was fairly high, especially in high school foodservices. Only the performance appraisal had an influence on organizational commitment (${\beta}$=0.292, P<0.05). Productivity was positively correlated with human resource management (r=0.432, P<0.001) and organizational commitment (r=0.36, P<0.01). In conclusion, school foodservices need to establish objective performance standards, and increase employee morale by enhancing reward systems and working conditions. In particular, irregular employees require training with job performance standards and given a proper reward program, depending on their performance, to improve organizational commitment.