• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.892-904
• /
• 2008

As a video encoding in resource constrained environments such as sensor networks has become an important issue, DVC(Distributed Video Coding) has been intensively investigated as a solution for light weighted video encoding problem. Known as one of the representative schemes of DVC, the Wyner-Ziv coding generates side information of current frame only at decoder, using correlation among frames, and reconstructs video through noise elimination on the side information using channel code. Accordingly, the better quality of side information brings less channel noise, thus attains better coding performance of the Wyner-Ziv coder. However, since it is hard for decoder to generate an accurate side information without any information of original frame, a method to successively improve side information using successively decoded original frame, based on decoding reliability, was previously developed. However, to improve side information from decoding results, not only an error rate of the decoding result as a reliability, but also the amount of reliable information from the decoding result is important. Therefore, we propose TDWZ(Transform-domain Wyner-Ziv coding) with successively improving side information based on decoding reliability considering not only an error rate but also the amount of reliable information of the decoding results. Our experiment shows the proposed method gains average PSNR up to 1.7 dB over the previous TDWZ, that is without successive side information improvement.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.66-74
• /
• 2010

Recently distributed video coding (DVC) is spotlighted for the environment which has restriction in computing resource at encoder. Wyner-Ziv (WZ) coding is a representative scheme of DVC. The WZ encoder independently encodes key frame and WZ frame respectively by conventional intra coding and channel code. WZ decoder generates side information from reconstructed two key frames (t-1, t+1) based on temporal correlation. The side information is regarded as a noisy version of original WZ frame. Virtual channel noise can be removed by channel decoding process. So the performance of WZ coding greatly depends on the performance of channel code. Among existing channel codes, Turbo code and LDPC code have the most powerful error correction capability. These channel codes use stochastically iterative decoding process. However the iterative decoding process is quite time-consuming, so complexity of WZ decoder is considerably increased. Analysis of the complexity of LPDCA with real video data shows that the portion of complexity of LDPCA decoding is higher than 60% in total WZ decoding complexity. Using the HDA (Hard Decision Aided) method proposed in channel code area, channel decoding complexity can be much reduced. But considerable RD performance loss is possible according to different thresholds and its proper value is different for each sequence. In this paper, we propose an adaptive HDA method which sets up a proper threshold according to sequence. The proposed method shows about 62% and 32% of time saving, respectively in LDPCA and WZ decoding process, while RD performance is not that decreased.

• Journal of Korea Multimedia Society
• /
• v.20 no.5
• /
• pp.731-739
• /
• 2017

Distributed compressed video sensing (DCVS) is a framework that integrates both compressed sensing and distributed video coding characteristics to achieve a low complexity video sampling. In DCVS schemes, motion estimation & motion compensation is employed at the decoder side, similarly to distributed video coding (DVC), for a low-complex encoder. However, since a simple BCS-SPL algorithm is applied to a residual arising from motion estimation and compensation in conventional MC-BCS-SPL (motion compensated block compressed sensing with smoothed projected Landweber) scheme, the reconstructed visual qualities are severly degraded in Wyner-Ziv (WZ) frames. Furthermore, the scheme takes lots of iteration to reconstruct WZ frames. In this paper, the conventional MC-BCS-SPL algorithm is improved to be operated in more effective way in WZ frames. That is, first, the proposed algorithm calculates a correlation coefficient between two reference key frames and, then, by selecting adaptively the reference frame, the residual reconstruction in pixel domain is performed to the conventional BCS-SPL scheme. Experimental results show that the proposed algorithm achieves significantly better visual qualities than conventional MC-BCS-SPL algorithm, while resulting in the significant reduction of the decoding time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.355-363
• /
• 2011

Recently, as one of several methods to improve the performance of DVC(Distributed Video Coding) system, many research works are focusing on the iterative refinement of side information. Most of the conventional techniques are mainly based on the relationship between the reconstruction level and side information, or the vector median filtering of motion vectors, but, their performance improvements are restricted. In order to overcome the performance limit of the conventional schemes, in this paper, a side information generation scheme is designed by measuring the block-cost estimation. Then, by adaptively selecting the compensation mode using the received bit-plane information, we propose a block-adaptive iterative refinement which is efficient for non-symmetric moving objects. Computer simulations show that, by using the proposed refinement method, the performance can be improved up to 0.2 dB in rate-distortion.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.58-66
• /
• 2009

Recently the emerging demands of the light-video encoder promotes lots of research efforts on DVC (Distributed Video Coding). As an appropriate video compression method, DVC has been studied, and Wyner-Ziv (WZ) video compression is its one representative structure. The WZ encoder splits the image into two kinds of frames, one is key frame which is compressed by conventional intra coding, and the other is WZ frame which is encoded by WZ coding. The WZ decoder decodes the key frame first, and estimates the WZ frame using temporal correlation between key frames. Estimated WZ frame (Side Information) cannot be the same as the original WZ frame due to the absence of the WZ frame information at decoder. As a result, the difference between the estimated and original WZ frames are regarded as virtual channel noise. The WZ frame is reconstructed by removing noise in side information. Therefore precise noise estimation produces good performance gain in WZ video compression by improving error correcting capability by channel code. But noise cannot be estimated precisely at WZ decoder unless there is good WZ frame information, and generally it is estimated from the difference of corresponding key frames. Also the estimated noise is limited by comparing with frame level noise to reduce the uncertainty of the estimation method. However these methods cannot provide good noise estimation for every frame or each bit plane. In this paper, we propose a noise nodel selection method which chooses a better noise model for each bit plane after generating candidate noise models. Experimental result shows PSNR gain up to 0.8 dB.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.20-28
• /
• 2012

DVC(Distributed Video Coding) technique is a new paradigm, which is based on the Slepian-Wolf and Wyner-Ziv theorems. DVC offers not only flexible partitioning of the complexity between the encoder and decoder, but also robustness to channel errors due to intrinsic joint source-channel coding. Many conventional research works have been focused on the light video encoder and its rate-distortion performance improvement. However, in this paper, we propose a new DVC codec which is effectively applicable for error-prone environment. The proposed method adopts a quantiser without dead-zone and symmetric Gray code around zero value. Through computer simulations, the proposed method is evaluated by the bit errors position as well as the number of burst bit errors. Additionally, it is shown that the maximum and minimum transmission rate for the given application can be linearly determined by the number of bit errors.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.14-24
• /
• 2012

DVC (Distributed Video Coding) techniques need feedback channel for parity bit control to achieve the good RD performances, however, this causes the DVC system to have high decoding latency. In order to implement in real time environments and to accelerate commercializations, many research works have been focusing on the development of fast video decoding algorithm. As one of the real time implementations, this paper deals with a novel DVC scheme suitable for some application areas where source statistics such as motion information can be provided to the encoder side from the decoder side. That is, this paper propose a fast distributed video decoding scheme to improve the decoding speed by using the feedback of motion information derived in SI generation. Through computer simulations, it is shown that the proposed method outperforms the conventional fast DVC decoding schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1675-1685
• /
• 2012

DVC (Distributed Video Coding) technique plays an essential role in providing low-complexity video encoder. But, in order to achieve the better rate-distortion performances, most DVC systems need feedback channel for parity bit control. This causes the DVC-based system to have high decoding latency and becomes as one of the most critical problems to overcome for a real implementation. In order to overcome this problem and to accelerate the commercialization of the DVC applications, this paper analyzes an effect of LDPCA frame size for adaptive LDPCA frame-based parity bit request estimations. First, this paper presents the LDPCA segmentation method in pixel-domain and explains the temporal-based bit request estimation method and the spatial-based bit request estimation method using the statistical characteristics between adjacent LDPCA frames. Through computer simulations, it is shown that the better performance and fast decoding is observed specially when the LDPCA frame size is 3168 in QCIF resolution.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.128-138
• /
• 2010

In this paper, we propose a new bit assignment scheme for Wyner-Ziv video coding. Distributed video coding (DVC) is a new video coding paradigm which enables greatly low complexity encoding because it does not have any motion prediction module at encoder. Therefore, it is very well suited for many applications such as video communication, video surveillance, extremely low power consumption video coding, and other portable applications. Theoretically, the Wyner-Ziv video coding is proved to achieve the same rate-distortion (RD) performance comparable to that of the joint video coding. However, its RD performance has much gap compared to MC-DCT-based video coding such as H.264/AVC. Moreover, Transform Domain Wyner-Ziv (TDWZ) video coding which is a kind of DVC with transform module has difficulty of exact bit assignment because the entire image is treated as a same message. In this paper, we propose a feasible bit assignment algorithm using adaptive quantization matrix selection for the TDWZ video coding. The proposed method can calculate suitable bit amount for each region using the local characteristics of image. Simulation results show that the proposed method can enhance coding performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.383-393
• /
• 2010

DVC (Distributed Video Coding) allows us to explore the video statistics at the decoder side, resulting in a less complex encoder and more complex decoder. In this approach, it is important to generate a good prediction to the current Wyner-Ziv frame, called side information, which plays a crucial role in the overall performance of a DVC system. Conventional MCFI (motion compensated frame interpolation) techniques, which explore temporal correlations between neighbor frames of the current frame, preform the block-based or object-based motion estimation, but, they do not include the basis frame for the Wyner-Ziv frame. This paper proposes an efficient way to get better side information, by finding the average frame between neighbor frames and by comparing adaptively the candidate blocks. Through computer simulations, it is shown that the proposed method can improve the performance up to 0.4dB and provide better subjective and objective visual qualities in Wyner-Ziv CODEC.