• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1043-1048
• /
• 2009

열차제어시스템의 소프트웨어 발전에 의해 PES가 사용되고 있다. PES는 현재 세계적으로 널리 사용하고 있고, 하드웨어, 펌웨어, 응용 소프트웨어로 구성되어 있다. PES의 실행이 높은 유연성을 가지고 있기 때문에 PES는 많은 응용분야에 쉽게 적용할 수 있다. 많은 안전 필수 기능들은 소프트웨어를 통해 수행되고 있다. 보통 PES는 매우 복잡하여 결함의 근원을 발견하기 쉽지 않다. 그래서 소프트웨어 결함허용 기법을 이용한 신뢰도 해석이 필요하다. 현재 소프트웨어 결함허용 기법에는 복구블록, 분산 복구 블록, N-버전 프로그래밍, N 자기검사 프로그램이 있다. 본 논문에서는 마르코프 모델을 이용하여 소프트웨어 결함허용 기법 중에 복구 블록과 N-버전 프로그래밍의 모델을 제시하였다. 또한 열차제어시스템의 신뢰도를 시간 변화에 따라 분석하였다. 프로그램의 결함 발생률, 수용테스트 결함발생률, 보터의 결함발생률은 고정시켰다. 그래서 시간과 신뢰도 사이의 관계를 Matlab 프로그램을 이용하여서 제시하였다. 같은 수의 대체블록이 있는 경우에 신뢰도 분석결과 복구 블록의 신뢰도는 N-버전 프로그래밍의 신뢰도보다 높게 해석되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2400-2402
• /
• 2004

The Controller Area Network (CAN) is being widely used in real-time control applications such as automobiles, aircraft, and automated factories. Unfortunately, CAN, in its current form, is not able to either share out the system bandwidth among the different devices fairly or to grant an upper bound on the transmission times experienced by the nodes connected to the communication medium as it happens, for instance, in the token-based networks. In this paper, we present the message scheduling for CAN, based on the distributed control scheme to integrate actuators and sensors in a humanoid robot. Besides introducing the new algorithm, this paper also presents some performance figures obtained using a specially developed software simulator, while the behavior of the new algorithm is compared with the traditional CAN systems, in order to see how effective they are.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2542-2544
• /
• 2000

In this paper, CAN(Controller Area Network)is used to solve the wire harness problem in the outside mirror of automobile which has a lot of functions in narrow space. If the number of wires is reduced, it has benefits of lower product cost and maintenance. CAN was originally developed by the German company Robert Bosch for use in the car industry to provide a cost-effective communications bus for in car electronics and as alternative to expensive and cumbersome wiring looms. CAN controller is a serial communication protocol which efficiently supports distributed real-time control with a very high level of security. The communication between master CAN controller and slave CAN controller is realized and controller's performance is tested by experiment.

• 인터넷정보학회논문지
• /
• 제22권6호
• /
• pp.1-8
• /
• 2021

With the rapid growth of intelligent devices and communication technologies, 5G network environment has become more heterogeneous and complex in terms of service management and orchestration. 5G architecture requires supportive technologies to handle the existing challenges for improving the Quality of Service (QoS) and the Quality of Experience (QoE) performances. Among many challenges, traffic steering is one of the key elements which requires critically developing an optimal solution for smart guidance, control, and reliable system. Mobile edge computing (MEC), software-defined networking (SDN), network functions virtualization (NFV), and deep learning (DL) play essential roles to complementary develop a flexible computation and extensible flow rules management in this potential aspect. In this proposed system, an accurate flow recommendation, a centralized control, and a reliable distributed connectivity based on the inspection of packet condition are provided. With the system deployment, the packet is classified separately and recommended to request from the optimal destination with matched preferences and conditions. To evaluate the proposed scheme outperformance, a network simulator software was used to conduct and capture the end-to-end QoS performance metrics. SDN flow rules installation was experimented to illustrate the post control function corresponding to DL-based output. The intelligent steering for network communication traffic is cooperatively configured in SDN controller and NFV-orchestrator to lead a variety of beneficial factors for improving massive real-time Internet of Things (IoT) performance.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.616-622
• /
• 2015

A microgrid which is composed of distributed generation systems, energy storage systems and loads is operated in the grid-connected mode and in the islanded mode. Especially, in the islanded mode, a microgrid should maintain frequency in the allowed range. The frequency is decided by a balance between power supply and power demand. In general, the frequency is controlled by using battery energy storage systems (BESSs) in the microgrid. Especially, droop control is applied to controlling BESSs in the microgrid. Meanwhile, over-charging and deep-discharging of BESS in operation and control cause life-shortening of batteries. In this paper, a fuzzy droop control is proposed to change droop gains adaptively by considering state of charge (SOC) of BESSs to improve the life cycle of the battery. The proposed fuzzy droop control adjusts droop gains based on SOC of BESSs in real time. In other to show the performance of the proposed fuzzy droop control, simulation based on Matlab/Simulink is performed. In addition, comparison of the convention droop control and the proposed fuzzy droop control is also performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1178-1183
• /
• 2003

As personal robots coexist with a person with a role to help a person, while adapting various human life and environment, the personal robots have to accommodate frequently-changing or different-from-home-to-home environment. In addition, personal robots may have many kinds of different Kinematic configurations depending on the capabilities. Some may have a mobile base and others may have arms and a head. The motivation of this study arises from this not-well-defined home environment and varying Kinematic configuration. So the goal of this study is to develop a general control architecture for personal robots. There exist three major architectures; deliberative, reactive and hybrid. We found that these are applicable only for the defined environment with a fixed Kinematic configuration. Neither could accommodate the above two requirements. For the general solution, we propose a Supervised Hybrid Architecture (SHA), in which we use double layers of deliberative and reactive controls, distributed control with a modular design of Kinematic configurations, and real-time Linux OS. Deliberative and reactive actions interact through a corresponding arbitrator. These arbitrators help a robot to choose an appropriate architecture depending on the current situation to successfully perform a given task. The distributed control modules communicate through IEEE 1394 for the easy expandability. With a personal robot platform with a mobile base, two arms, a head and a pan-tilt stereo eye system, we tested the developed SHA for static as well as dynamic environments. For this application, we developed decision-making rules for selecting appropriate control methods for several situations of navigation task. Examples are shown to show the effectiveness.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1936-1945
• /
• 2008

In Korea, TCN has applied to the Korean High-speed Train (HSR350X) through G7 High-speed Train development project. TCN is the most suitable international standard communication network for distributed control systems that is adopted for high-speed of vehicle, safety and flexibility. TCN is the network exclusively for the high-speed train and electrical trains. This TCN satisfies the network standards. The network standards are real time communication, fault tolerance design, integrated data system, resistance of environment, automated recognition for modification of vehicle formation and maintenance. The purpose of this research is applying the development of WTB analyzer which is part of communication network system TCN, to check the communication of high-speed trains and electrical trains.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1046-1055
• /
• 2016

A controller to mitigate the destabilizing effect of constant power load (CPL) is proposed for a DC/DC buck-boost converter. The load profile has been considered to be predominantly of CPL type. The negative incremental resistance of the CPL tends to destabilize the feeder system, which may be an input filter or another DC/DC converter. The proposed sliding mode controller aims to ensure system stability under the dominance of CPL. The effectiveness of the controller has been validated through real-time simulation studies and experiments under various operating conditions. The controller has been demonstrated to be robust with respect to variations in supply voltage and load and capable of mitigating instabilities induced by CPL. Furthermore, the controller has been validated using all possible load profiles, which may arise in modern-day DC-distributed power systems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.288-294
• /
• 2011

본 논문에서는 FPGA기반의 SoC보드(Xilinx Virtex-4 ML401 EVM)를 이용한 전력인버터제어시스템을 설계하였다. 선박에 전력시스템을 적용하기 위해서 선박의 최신 통신 프로토콜인 NMEA 2000 표준 프로토콜을 적용하였으며 전력 시스템의 성능을 평가하기 위한 PC기반의 모니터링 프로그램을 제작하였다. 전력 제어시스템은 FPGA기반의 임베디드 SoC보드상에서 이중프로세서(Dualprocessor)형태로 설계하였으며 이중프로세서를 적용함으로써 실시간 제어 감시가 가능하다. 이중프로세서 중 하나는 전력 제어를 위한 PWM신호생성 및 전력 회로내의 주요 전력 파라미터를 센싱 하는 제어용 프로세서로 동작하며(Control processor) 다른 프로세서는 제어프로세서의 각종 전력 센서 파라미터와 제어 파라미터들을 이중포트 램(Dual Port RAM)을 이용하여 정보를 공유하고 외부 NMEA 2000프로토콜 기반의 모니터링 장치와 네트워크 기반의 통신을 수행하는 통신용 프로세서(Communication processor)로 구성된다. 본 논문에서 제작한 전력 제어시스템은 선박내의 분산발전,송배전 및 전압 레귤레이션 시스템에 적용 될 수 있다.

• 정보처리학회논문지A
• /
• 제12A권1호
• /
• pp.23-30
• /
• 2005

인과순서 메시지 전달 알고리즘은 모든 전송되는 메시지가 인과순서로 전달되도록 한다. 인과순서를 유지하기 위해서는 전송되는 모든 메시지가 제어정보를 가지고 다녀야 하고, 제어정보의 크기는 관련된 프로세스의 수에 비례하여 커지게 되므로 제어정보의 크기를 줄이는 것은 분산시스템의 주요한 관심사가 되어 왔다. 본 논문에서는 실시간 성질을 가지는 멀티미디어 자료를 위한 효율적인 ${\Delta}$-인과순서 알고리즘을 제안하고 평가하였다. 제안된 알고리즘은 전송 부하를 줄이기 위하여 인과순서를 유지하는데 필수적이지 않은 정보를 가능한 이른 시기에 찾아내어 제거하며, 기존 알고리즘보다 훨씬 적은 전송부하를 가지게 된다.