• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.741-753
• /
• 2008

This paper explores the throughput performance of CSMA/CA-based DCF protocol over both ideal channels and fading channels with payload size at the MAC layer in the 802.11a wireless LAN. In the ideal channel, there are no errors and at the transmission cycle there is one and only one active station which always has a packet to send and other stations can only accept packets and provide acknowledgements. In the fading channel, bit errors appear in the channel randomly and the number of stations is assumed to be fixed. And each station always has packets for transmission. In other words, we operate in saturation conditions. Up to now conventional research work about DCF throughput analysis of IEEE 802.11 a wireless LAN has been done over the ideal channel, but this paper is done over the Rayleigh/Ricean fading channel. So, the ratio of received average energy per bit-to-noise power spectral density $E_b/N_o$ is set to 25 dB and the ratio of direct-to-diffuse signal power in each sub-channel $\xi$ is set to 6 for combined Rayleigh/Ricean fading channel. In conclusion, it is shown that the saturation throughput is always less than the maximum throughput at all the payload size and the higher the transmission rate be, the higher the decreasing rate of saturation throughput compared to the maximum throughput be.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.61-68
• /
• 2021

The application of renewable energies such as wind and solar has become an inevitable choice for many countries in order to achieve the reduction of greenhouse gases and healthy economic development. However, due to the intermittent characteristics of renewable energy, the issue with integrating a larger proportion of renewable energy into the grid becomes more prominent. A complex energy system, usually consists of two or more renewable energy sources used together to provide increased system efficiency as well as greater balance in energy supply. Compared with the power system, control and optimization of the complex energy system become more difficult in terms of modeling, operation, and planning. The main purpose of the complex energy system retrofit for samado island with microgrid system is to coordinate the operation with various distributed energy resources, energy storage systems, and power grids to ensure its reliability, while reducing the operating costs and achieving the optimal economic benefits. This paper suggests the improved complex energy system of samado island with optimal microgrid system. The results of test operation show about 12% lower SOC variation band of ESS, elimination of operation limit in PV and reduction of operation time in diesel generator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.277-286
• /
• 2021

Background: As trade increases, the influx of various alien species and their spread to new regions are prevalent and no longer a special problem. Anthropogenic activities and climate changes have made the distribution of alien species out of their native range common. As a result, alien species can be easily found anywhere, and they have nothing but only a few differences in intensity. The prevalent distribution of alien species adversely affects the ecosystem, and a strategic management plan must be established to control them effectively. To this end, hot spots and cold spots were analyzed according to the degree of distribution of invasive alien plants, and major environmental factors related to hot spots were found. We analyzed the 10,287 distribution points of 126 species of alien plants collected through the national survey of alien species by the hierarchical model of species communities (HMSC) framework. Results: The explanatory and fourfold cross-validation predictive power of the model were 0.91 and 0.75 as AUC values, respectively. The hot spots of invasive plants were found in the Seoul metropolitan area, Daegu metropolitan city, Chungcheongbuk-do Province, southwest shore, and Jeju island. Generally, the hot spots were found where the higher maximum temperature of summer, precipitation of winter, and road density are observed, but temperature seasonality, annual temperature range, precipitation of the summer, and distance to river and sea were negatively related to the hot spots. According to the model, the functional traits accounted for 55% of the variance explained by the environmental factors. The species with higher specific leaf areas were more found where temperature seasonality was low. Taller species preferred the bigger annual temperature range. The heavier seed mass was only preferred when the max temperature of summer exceeded 29 ℃. Conclusions: In this study, hot spots were places where 2.1 times more alien plants were distributed on average than non-hot spots (33.5 vs 15.7 species). The hot spots of invasive plants were expected to appear in less stressful climate conditions, such as low fluctuation of temperature and precipitation. Also, the disturbance by anthropogenic factors or water flow had positive influences on the hot spots. These results were consistent with the previous reports about the ruderal or competitive strategies of invasive plants instead of the stress-tolerant strategy. The functional traits are closely related to the ecological strategies of plants by shaping the response of species to various environmental filters, and our result confirmed this. Therefore, in order to effectively control alien plants, it is judged that the occurrence of disturbed sites in which alien plants can grow in large quantities is minimized, and the river management of waterfronts is required.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.2
• /
• pp.109-118
• /
• 2020

This study examines the relative usefulness of the TPB and Extended TPB with the addition of the "Battery" variable to participants in marine sports experiences. The characteristics of behavioral theories (attitude, subjective norms, perceived behavioral control, and revisit intention) were compared. A total of 420 questionnaires were distributed and surveyed using the convenience sampling method to the general public who participated in the marine sports experience in S city in 2019. Finally, 385 copies of valid samples were extracted, except for the questionnaire. The following analyzes were performed using SPSS 21.0 and AMOS 21.0. Frequency analysis, confirmatory factor analysis, concept reliability, AVE value, Cronbach's α correlation analysis, hierarchical regression analysis, and independent sample t-test were performed. First, in the TPB, three predictors were found to have a positive effect on revisit intention. Attitudes, subjective norms, and prior knowledge, except for behavioral control, were found to have a positive effect. Second, the explanatory power to explain the return intention was 51.8% (3.3% more than plan behavior theory, p = .000). It can be seen that when prior knowledge is added as a new variable, it is an important factor in explaining intention to return. Third, prior knowledge variables were classified into high and low groups to compare the characteristics of the extended planning behavior theory. The results of the analysis showed that the group with higher prior knowledge had a higher mean value for the constituent variables of the extended planning behavior theory.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.2
• /
• pp.79-93
• /
• 2021

The question of why do you want to start a "start?" Is the most basic step in trying to do something. In other words, previous studies have shown that the degree of confidence in an individual's decision affects the setting of a specific purpose. Based on this, this study aims to provide basic data for deriving the direction of entrepreneurship education in college students by analyzing the effects of goal-oriented behavioral model on college students' self-determination and intention to start a business through the 5 factor model. To achieve the purpose of the study, a self-report questionnaire was conducted from October 01 to November 11, 2019 for university students attending located in Gyeonggi-do, Seoul. A total of 150 questionnaires were distributed, and 125 parts were used for the final analysis, except 25 parts with insincere responses or errors. Data were analyzed using SPSS Win 24, and reliability, validity analysis, frequency analysis, One-way ANOVA and regression analysis were performed, and three-step regression analysis and Sobel verification were performed for mediating effects. The summary of the study is as follows. First, the influence of university students' goal-oriented behavioral model on self-determination showed that attitudes, subjective norms, and perceived behavioral controls had statistically significant positive effects, and positive and negative expectations were statistically significant. Did not affect. Therefore, the higher the attitude, subjective norms, and perceived behavioral control, the higher the university students' self-determination. Second, the influence of college students' goal-oriented behavioral model on the intention to start a business was as follows.). As a result, the higher the perceived behavioral control and positive expectation, the higher the intention to start up. Third, regression model 1 showed that the behavioral control and positive expectation sentiment among the goal-oriented behavioral model had a significant positive influence on the college students' intention to start a business. Affected. Regression model II added the parameters of the 5 factor model, which increased 2.5% of explanatory power than the first regression model. Perceived behavioral control and positive expectations had a statistically significant positive effect, negative expectations had a statistically significant negative effect, and among the 5 factor model, openness had a statistically significant positive (+) Affected. From these results, it can be seen that the Big Five personality factors have a mediating effect on the relationship between goal-oriented behavior model and intention to start up. This study confirmed that the goal-oriented behavioral model of college students is an important variable in implementing self-determination and intention to start a business. In addition, by using his Big 5 personality factors as positive feedback, he has proved to play an important role by identifying the mediation role that can be set, planned and utilized to plan and achieve his life. The result of this study is that college students are interested in the intention of individual start-ups, so they are not freed from difficult employment difficulties. It is intended to provide basic data useful in the age of creation of government.

• Journal of Drive and Control
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2020

This study was to develop a simulation model of a compound planetary gear reducer for the final driving shaft using a gear analysis software (KISSsoft, Version 2017, KISSsoft AG, Switzerland). The aim of this study is to analyze transmission error and the tooth load distribution through micro-geometry using the simulation model. The tip and root relief were modified with Micro-geometry in the profile direction, and crowning was modified with Micro-geometry in the lead direction. The transmission error was analyzed using the PPTE (Peak to Peak Transmission Error) value, and the tooth load distribution was analyzed for the concentrated stress on the tooth surface. As a result of modifying tip and relief in the profile direction, the transmission error was reduced up to 40.7%. In the case of modifying crowning in the lead direction, the tooth load was more evenly distributed than before and decreased the stress on the tooth surface. After modifying the profile direction for the 1st and 2nd planetary gear train, the bending and contact safety factors were increased by 31.7% and 17%, and 18.3% and 12.5% respectively. Moreover, the bending and safety factors after modifying lead direction were increased by 59.5% and 32.7%, respectively for the 1st planetary gear train, and 59.6% and 43.6%, respectively for the 2nd planetary gear train. In future studies, the optimal design of a compound planetary gear reducer for the final driving shaft is needed considering both the transmission error and tooth load distribution.

• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.117-126
• /
• 2004

In general, the patients who transferred to the hospital by 119 rescue service at night go to the emergency room(ER) of general hospital rather than that of their nearby the 1st(clinic) and 2nd(local hospital) hospital. And the hospital is mainly selected not by 119 EMST but by patients or his/her conservators. Therefore we had studied retrospectively with emergency situation diary and medical chart for 697 patients of being transferred to one emergency medical center for 6 months since January 2004, and results are as follows. 1. The 280 patients(42.5%) of being transferred hospital at night by 119 rescue service were not emergency case and their average staying time in hospital was about $7.15{\pm}10.06$ minutes. 2. Transfer time was distributed in each time intervals of 1819, 2021, 2223, and 2401 and patients ratio in each intervals were 15.1%, 17.8%, 16.4%, and 15.2%. 3. In response of ambulance, the average time from the spot to the hospital was $14.53{\pm}9.27min$. and average distance of that was $7.95{\pm}9.21km$. 4. Diseases rather than traffic accidents or traumatic injury were main causes of ambulance calling and its value was 533(76.5%), and accidents were mainly occurred in patients' house and its value was 479(68.7%). 5. In time of transfer by 119 rescue service, hospital was mainly selected by patient/conservator and its value was 648(93.0%). In result. the hospital was selected not by EMST but by patient/conservator. 6. The case that the 1st grade EMT was rode in ambulance was 161(23.1%), and the case that 2nd EMT and emergency team member who educated for emergency were rode in ambulance were 504(72.3%). So the number of the 1st grade EMT was short in fire station of Kwangju metropolitan city than other city. 7. The first aids for patients before reaching hospital were limited to oxygen inhalation, airway control, and BLS for maintaining limbs and spine. So it seems to be a simple patients transfer. Consequently, to establish an efficient emergency medical system, it has been thought that it should be advanced a moderate education and public information about the appropriate use of emergency medical system toward citizen, and also need the hospital selection by the patients categorizing standards for 119 rescue service member, securing the 1st grade EMT, appropriate first-aids education, and securing professional human power in emergency room of the Ist(clinic) and 2nd(local hospital) hospital at night.