• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.249-257
• /
• 2006

지반 설계 인자는 공간적으로 분포하는 특성이 있으며, 이는 터널의 설계와 시공과정 뿐만 아니라 장기 거동에 큰 영향을 미친다. 그러나 일반적으로 터널의 수치해석을 위한 설계 지반 인자는 대상 영역을 대표하는 값 또는 대상 영역의 광역적 평균값 등이 적용되고 있다. 특히, 지하공간의 크기가 증가할수록 설계 지반 인자의 불확실성 및 공간적 분포 또한 증가한다. 결국 이러한 불확실성과 공간적 분포 특성의 확대는 해석의 정확성 및 신뢰성 저하를 초래하게 된다. 따라서, 대형 터널의 구조적 안정성을 확보하기위해 지반 물성치들의 공간적인 분포에 대한 정량적인 조사가 설계시 포함되어야 한다. 본 연구에서는 지반 물성치 및 구조적 설계 인자의 공간적 분포가 터널의 변위에 미칠 수 있는 영향을 분석하였다. 여러 COV(Coefficient of Variation)에 따라 정규분포하는 지반 물성치의 공간적 특성이 이상화된 원형 터널의 변위에 미치는 영향에 대한 분석과, NATM(New Austrian Tunneling Method) 터널에서 숏크리트의 강도의 공간적 분포가 터널 변위에 미치는 영향을 분석하였다. 공간적 분포의 COV가 증가할수록 터널 주변 발생하는 변위량도 증가하는 것으로 나타났으며, 분석 결과 이들은 지반 물성치에 따라 고유한 계수를 갖는 삼차방정식으로 표현된다.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.111-127
• /
• 2020

The goal of this study is to fill this apparent gap in the area about investigating the effect of porosity distributions on vibrational behavior of FG sectorial plates resting on a two-parameter elastic foundation. The response of the elastic medium is formulated by the Winkler/Pasternak model. The internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The model is proposed with material parameters varying in the thickness of plate to achieve graded distributions in both porosity and nanofillers. The elastic modulus of the nanocomposite is obtained by using Halpin-Tsai micromechanics model. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. The 2-D differential quadrature method as an efficient and accurate numerical approach is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution. Results show that for better understanding of mechanical behavior of nanocomposite plates, it is crucial to consider porosities inside the material structure.

• 농업과학연구
• /
• 제33권2호
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.137-146
• /
• 2007

구조물의 거동에 대한 파사드리거의 보강 효과를 검토하고 파사드리거의 최적위치를 추정할 수 있는 수치해석방법이 제시되었다. 구조물 상부의 수평변위를 최소화할 수 있는 파사드리거의 최적위치는 파사드리거의 구속효과에 의한 수평변위 감소량을 극대화함으로서 구할 수 있으며 가새골조와 파사드리거의 휨강성과 전단강성에 의해 크게 영향을 받는다. 본 연구에서는 3가지 형태의 하중, 즉 등분포하중과 삼각분포하중 그리고 구조물 상단에 작용하는 집중하중이 고려되었다. 파사드리거의 최적위치는 무차원 강성변수 ${\omega}$와 ${\beta}$의 함수로서 표현되었으며, 1개부터 4개의 파사드리거를 갖는 구조물을 대상으로 최적위치에 대한 도표를 작성하였다. 비록 본 연구에서 제시된 해석방법이 몇 가지의 가정을 기초로 유도되었으나 고층건물의 초기설계단계에서 파사드리거의 최적위치 결정을 위한 비교적 정확한 정보를 제공할 수 있다고 사료된다.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.403-409
• /
• 2007

In this paper, effects of the trench angle($\theta$) on the breakdown voltage according to the process parameters of p-base region and doping concentrations of n-drift region in a Trench Gate IGBT (TIGBT) device were analyzed by computer simulation. Processes parameters used by variables are diffusion temperature, implant dose of p-base region and doping concentration of n-drift region, and aspects of breakdown voltage change with change of each parameter were examined. As diffusion temperature of the p-base region increases, depth of the p-base region increases and effect of the diffusion temperature on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 134.8 % in the case of high trench angle($90\;^{\circ}$). Moreover, as implant dose of the p-base region increases, doping concentration of the p-base region increases and effect of the implant dose on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 232.1 % in the case of high trench angle($90\;^{\circ}$). These phenomenons is why electric field concentrated in the trench is distributed to the p-base region as the diffusion temperature and implant dose of the p-base increase. However, effect of the doping concentration variation in the n-drift region on the breakdown voltage varies just 9.3 % as trench angle increases from $45\;^{\circ}$ to $90\;^{\circ}$. This is why magnitude of electric field concentrated in the trench changes, but direction of that doesn't change. In this paper, respective reasons were analyzed through the electric field concentration analysis by computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• Wind and Structures
• /
• 제25권2호
• /
• pp.131-156
• /
• 2017

This paper deals with the dynamic stability of embedded functionally graded (FG)-carbon nanotubes (CNTs)-reinforced micro cylindrical shells. The structure is subjected to harmonic non-uniform temperature distribution and 2D magnetic field. The CNT reinforcement is either uniformly distributed or FG along the thickness direction where the effective properties of nano-composite structure are estimated through Mixture low. The viscoelastic properties of structure are captured based on the Kelvin-Voigt theory. The surrounding viscoelastic medium is considered nonhomogeneous with the spring, orthotropic shear and damper constants. The material properties of cylindrical shell and the viscoelastic medium constants are assumed temperature-dependent. The first order shear deformation theory (FSDT) or Mindlin theory in conjunction with Hamilton's principle is utilized for deriving the motion equations where the size effects are considered based on Eringen's nonlocal theory. Based on differential quadrature (DQ) and Bolotin methods, the dynamic instability region (DIR) of structure is obtained for different boundary conditions. The effects of different parameters such as volume percent and distribution type of CNTs, mode number, viscoelastic medium type, temperature, boundary conditions, magnetic field, nonlocal parameter and structural damping constant are shown on the DIR of system. Numerical results indicate that the FGX distribution of CNTs is better than other considered cases. In addition, considering structural damping of system reduces the resonance frequency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권2호
• /
• pp.162-167
• /
• 2009

Reproductive abilities in beef cattle herds are receiving increased attention due to recent rises in production costs. To achieve more efficient management, a measure of fertility, namely the number of calves produced at k yr of age ($NCP_k$), was developed and its genetic parameters were estimated from Japanese Black cows by restricted maximum likelihood procedures. The k examined were distributed from 2 to 10 yr of age and $NCP_2$ averaged 1.077 calves over 43,536 cows. The averages increased by approximately 0.9 calf with each additional 1 yr increment in k. Heritabilities of $NCP_k$ were estimated to be low ranging from 0.083 to 0.162, which seemingly suggested a difficulty of genetic improvement. However, large genetic variation and high accuracy were observed in predicted breeding values of $NCP_k$. For example, the breeding values of $NCP_7$ were predicted between -0.303 and +0.213 with average accuracy of 0.607 for cows with observations. Genetic correlations among different k were generally high and positive (0.474 to 0.995). The analyses showed that at least $NCP_4$ was required to maintain the genetic correlations of 0.8 or higher with subsequent $NCP_k$. Also $NCP_5$ maintained the genetic correlations of 0.9 or higher with subsequent $NCP_k$ The results suggested some possibilities for $NCP_k$ to be a selection criterion considering its genetic variation, high accuracy and consistency with subsequent performance.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.262-273
• /
• 2006

The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and sediment simulation worldwide. In most cases, the SWAT model is first calibrated with adjustments in model parameters, and then the validation is performed. However, very little study regarding the effects on SWAT estimation of subwatershed delineation was performed. Thus, the SWAT model was applied to the Doam-dam watershed with various threshold values in subwatershed delineation in this study to examine the effects on the number of subwatershed delineated on SWAT estimation. It was found the flow effect of subwatershed delineation is negligible. However there were huge variations in SWAT estimated sediment, T-N, and T-P values with the use of various threshold value in watershed delineation. Sometimes these variations due to watershed delineation are beyond the effects of parameter adjustment in model calibration and validation. The SWAT is a semi-distributed modeling system, thus, the subwatershed characteristics are assumed to be the same for all Hydrologic Response Unit (HRU) within that subwatershed. This assumption leads to variations in the SWAT estimated sediment and nutrient output values. Therefore, it is strongly recommended the SWAT users need to use the HUR specific slope length and slope value in model runs, instead of using the slope and the corresponding slope length of the subawatershed to exclude the effects of the number of subwatershed delineated on the SWAT estimation.

• 한국정보통신학회논문지
• /
• 제19권10호
• /
• pp.2457-2464
• /
• 2015

무선 네트워크를 통한 네트워크 제어 시스템 (NCS: Networked Control Systems)은 다양한 제어 시스템의 효율성을 극대화 할 수 있는 잠재력을 가지고 있다. 본 연구에서는 네트워크 제어 시스템으로부터 이끌어낸 상태갱신주기(SUI: State Update Interval)라는 성능 메트릭을 정의한다. 제시된 상태갱신주기는 제어와 통신 시스템 계층 사이의 핵심적인 상호작용을 포함하고 있다. 제시된 성능 메트릭은 NCS를 위한 최적화 문제를 도출하는데 사용이 되었으며, 이러한 최적화 문제의 목적 함수는 상태갱신주기의 제한 요소를 만족하는 확률이며 변수는 매체접근 확률로 표현되었다. 본 연구에서는 제시된 최적화 문제의 최적 매체접근 확률이 유일한 해를 가진다는 것을 증명하였다. 또한 NCS를 위한 최적의 매체접근 확률은 전송률을 극대화하는 기존의 매체접근 확률보다 낮다는 결론을 도출하였다. 성능 분석 결과를 통하여 시스템의 안정도가 상태갱신주기를 고려한 최적의 매체접근 확률을 사용하였을 때가 전송률을 최대화하는 매체접근 확률을 사용 했을 때 보다 높다는 점을 보였다.