• Journal of the Korean Solar Energy Society
• /
• v.38 no.4
• /
• pp.55-66
• /
• 2018

nZEH (net-Zero Energy House) is defined as a self-sufficient energy building where the sum of energy output generated from new & renewable energy system and annual energy consumption is zero. The electricity generated by new & renewable energy system with the form of distributed generation is preferentially supplied to electrical demand, and surplus electricity is transmitted back to grid. Due to the recent expansion of houses with photovoltaic system and the nZEH mandatory by 2025, the rapid increase of distributed generation is expected. Which means, we must prepare for an electricity-power accident and stable electricity supply. Also electricity charges have to be reduce and the grid-connected should be operated efficiently. The introduction of ESS is suggested as a solution, so the analysis of the load matching and grid interaction is required to optimize ESS design. This study analyzed the load matching and grid interaction by expected consumption behavior using actual data measured in one-minute intervals. The experiment was conducted in three nZEH with photovoltaic system, called all-electric houses. LCF (Load Cover Factor), SCF (Supply Cover Factor) and $f_{grid}$ (Grid Interaction Index) were evaluated as an analysis indicator. As a result, LCF, SCF and $f_{grid}$ of A house were 0.25, 0.23 and 0.27 respectively; That of B house were 0.23, 0.23, 0.19, and that of C were 0.20, 0.19, 0.27 respectively.

• Journal of KIISE:Software and Applications
• /
• v.27 no.4
• /
• pp.315-326
• /
• 2000

As Internet is being widely used as an infra of distributed applications, the most of today's softwares are changing into Internet-based distributed applications. The development methods using the middleware, like CORBA ORB, make the development of the web-based software easy. However, the performance verification method useful for an optimized software distribution is not provided at software development. Additionally, monitoring methods and metrics for dynamic load-balancing are not presented at run-time. This paper presents the method to monitor the message between objects, load metric, and metrics for load-balancing. To calculate a load of a node, we define events occurred between applications, time between the events, then extract the data related to a load. And we derive formula calculating the load from the extracted data. Then using the formula, we present the metrics for dynamic load-balancing. Moreover, we observe the utilization and efficiency of the monitoring algorithm, load metric, and load-balancing metrics.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.3-11
• /
• 1999

The atomic fuel rods between top and bottom end pieces of reactor need to be extended for high combustion rate of future-type fuel to increase the irradiation in the axial direction. For allowing axial extension of the fuel rods, the space between top and bottom end pieces should be expanded. Thus the thickness reduction of the flow plate is necessary. This study was carried out the mechanical strength test by using strain gages as a function of flow plate thickness, the existence of skirt and loading condition for the Korean Fuel Assembly(KOFA). The experimental apparatus was designed for load conditions, uniformly distributed load and displacement. Test method using whiffle tree of uniformly distributed load has been comparatively conservative. The test results were compared with those of finite element analysis and the test method on bottom end piece was established.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.89-98
• /
• 1994

In this paper, a criteria for selecting an appropriate load redistribution algorithm is devised so that a fault-tolerance distributed system can operte at its optimal efficience. To present the guideline for selecting redistributing algorithms, simulation models of fault-tolerant system including redistribution algorithms are developed using SLAM II. The job arrival rate, service rate, failure and repair rate of nodes, and communication delay time due to load migration are used as parameters of simulation. The result of simulation shows that the job arrival rate and the failure rate of nodes are not deciding factors in affecting the relative efficiency of algorithms. Algorithm B shows relatively a consistent performance under various environments, although its performance is between those of other algorithms. If the communication delay time is longer than average job processing time, the performance of algorithm B is better than others. If the repair rate is relatively small or communication delay time is longer than service time, algorithm A leads to good performance. But in opposite environments, algorithm C is superior to other algorithms.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.87-93
• /
• 2002

In this paper, an advanced load balancing algorithm in nth order Hypercube distributed system has been proposed. The new algorithm uses centralized load-balancing to avoid blocking phenomenon and processor thrashing, and shows the results which makes loads to approach average value of loads. The new algorithm is compared with several other algorithm and it shows a merit in cost function value.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.106-114
• /
• 1999

This paper explores the geometrical non-linear behavior of the simply supported tapered beams subject to the trapezoidal distributed load and end moments. In order to apply the Bernoulli -Euler beam theory to this tapered beam, the bending moment equation on any point of the elastical is obtained by the redistribution of trapezoidal distributed load. On the basis of the bending moment equation and the BErnoulli-Euler beam theory, the differential equations governging the elastical of such beams are derived and solved numerically by using the Runge-Jutta method and the trial and error method. The three kinds of tapered beams (i.e. width, depth and square tapers) are analyzed in this study. The numerical results of non-linear behavior obtained in this study from the simply supported tapered beams are appeared to be quite well according to the results from the reference . As the numerical results, the elastica, the stress resultants and the load-displacement curves are given in the figures.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1407-1418
• /
• 2018

Novel mechanism of customized adequacy formulation is proposed in order to enhance micro grids system reliability. The mechanism accounts for 2-levles of load curtailment, and is mainly based on probabilistic load profile and hybrid Distributed Generation (DG) units modeling. The two load curtailments are needed in order to ensure adequate technical constraints at steady state condition during islanding mode of operation. The effectiveness of the proposed formulation has been verified using system independent analytical expressions for the evaluation of both reliability and Expected Energy Not Served (EENS) indices. The evaluation has examined the impact of different penetration levels of Hybrid DG Units in case study islands. Results show the enhancement of the overall distribution system reliability and the recommended conditions for successful islanding mode of operation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.109-120
• /
• 2001

Live load data were collected with a systematic manner from a survey of a refrigeration stores. Using the collected floor live load survey data, the basic statistics, a histogram of the uniformly distributed loads, and the equivalent uniformly distributed loads are computed for various structural members. Based on the above results, the maximum values of a combined live loads during the design life have been estimated and compared with current design live loads. The ultimate goals of this study are to develop probabilistic live load models to analyze survey data of domestic refrigeration stores, and to propose design live loads for structural types.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.106-108
• /
• 2014

본 논문에서는 노드의 로드밸런싱 속성을 이용하여 분산경로를 설정하는 L.T(Load Tolerance)알고리즘을 제안한다. 모바일 애드 혹 네트워크(Mobile Ad hoc Network)는 유동성을 가진 노드들로 구성된 네트워크로 토폴로지의 변화가 빈번하여, 기존 알고리즘에서는 라우팅 경로를 유지하기 위한 계층적 네트워크연구가 진행되어 왔다. 하지만 계층적 네트워크에서 특정 클러스터 헤드노드에게 로드밸런싱이 집중될 경우, 클러스터 헤드노드의 제한된 로드밸런싱을 초과되어 통신이 단절된다. 본 논문에서 제안한 알고리즘은 유효한 통신 반경 안에 존재하는 클러스터 헤드노드들의 로드밸런싱을 측정한다. 클러스터 헤드노드의 로드밸런싱이 높을 경우, 소속된 클러스터 멤버노드는 클러스터 헤드노들의 로드밸런싱과 동적속성을 분석하여 L.T 속성을 계산하며, 계산된 L.T 속성을 이용하여, 노드의 분산경로를 설정한다. 모의실험을 통해 클러스터 헤드노드의 로드 밸런싱이 높을 경우, 로드밸런싱이 낮은 분산 경로를 제공함에 따라 향상된 패킷 전송률을 보일 것으로 기대된다.

• Coupled systems mechanics
• /
• v.11 no.4
• /
• pp.297-313
• /
• 2022

The objective of this paper is to study the effect of frequency in a two-dimensional orthotropic thermoelastic rotating solid with fractional order heat transfer in generalized thermoelasticity with two-temperature due to inclined load. As an application the bounding surface is subjected to uniformly and linearly distributed loads (mechanical and thermal source). The problem is solved with the help of Fourier transform. Assuming the disturbances to be harmonically time dependent, the expressions for displacement components, stress components, conductive temperature and temperature change are derived in frequency domain. Numerical inversion technique has been used to determine the results in physical domain. The results are depicted graphically to show the effect of frequency on various components. Some particular cases are also discussed in the present research.