• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2291-2296
• /
• 2007

Thermal transport from vertical heated surface to falling liquid film in a channel has been investigated experimentally. Air-flow is introduced into channel to make a counter flow against falling liquid film. This problem is of particular interest in the design of direct contact heat exchange system, such as cooling tower, evaporative cooling system, absorption cooling system, and distillation system. The effects of channel width and air flow rate on the heat transfer to falling liquid film are studied in detail. The results obtained indicate that heat transfer rate is gradually decreased with an increase in the channel width without air flow as well as with air flow in a channel. It is also found that heat transfer rate of air-flow is increased while heat transfer rate of falling liquid film is decreased with an increase in the air flow rate at a given channel width. However, total heat transfer rate form the heated surface is increased as the air flow rate is increased.

• 공업화학
• /
• 제10권5호
• /
• pp.677-681
• /
• 1999

휘발성 액체 혼합물의 분리공정에 필요한 증류탑 설계의 필수 요건인 기-액평형에 관한 연구로서 cyclohexanol-cyclohexanone 2성분계에 대한 감압하 즉 150, 300 및 500 mmHg에서의 기-액평형치를 측정하고, 이 측정치와 30, 100, 200, 395 및 750 mmHg에서의 이미 발표된 기-액평형치를 이용하여 비휘발도와 익조성의 관계로부터 cyclohexanol-cyclohexanone 2성분계의 기-액평형치를 추산하는 추산식을 구하고, 여기서 구한 추산치를 실측치 및 문헌치와 비교 검토하였다. 그 결과 적은 오차 범위에서 잘 일치함을 확인하였다.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.34-39
• /
• 2017

Vapor-liquid equilibrium calculation is required to properly design and operation of distillation process. The general calculation method is to use binary interaction parameter. Lower flash points of cyclohexanol+aniline and cyclohexanol+cyclohexanone were measured by using Seta-flash closed cup apparatus. The measured flash points were compared with those calculated by the method based on Raoult's law and the optimization method using Wilson equation. The absolute average errors(A.A.E.) of the results calculated by Raout's law are $0.25^{\circ}C$ and $1.07^{\circ}C$ for cyclohexanol+aniline and cyclohexanol+cyclohexanone, respectively. The absolute average errors of the results calculated by the optimization method are $0.22^{\circ}C$ and $0.65^{\circ}C$ for cyclohexanol+aniline and cyclohexanol+cyclohexanone, respectively. As can be seen from A.A.E., the calculated values based on the optimization method were found to be better than those based on the Raoult's law. The binary interaction parameters calculated by the optimization method are used to predict the dew points of cyclohexanol+aniline and cyclohexanol+cyclohexanone. The A.A.E. for these mixtures show that there is an acceptable agreement between experimental and calculated dew poins.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.238-242
• /
• 2015

다중 효용 해수 담수화 설비에 적용되는 증기이젝터 진공장치에 대한 수치해석적 연구를 수행하였다. 본 연구의 목적은 해수 담수화 과정을 위한 증기이젝터 진공장치의 성능특성에 대한 수치적 검토를 수행하는 데에 있다. 증기이젝터 내부의 유동특성을 보다 잘 파악하고 최적의 설계를 도모하기 위하여, 노즐 사이즈 및 디퓨저 축소각의 변화와 같은 설계변수의 변화가 증기이젝터의 성능에 미치는 영향에 대해서도 논의하였다. 해석결과는 실험결과와 전반적으로 잘 일치함을 알 수 있으며, 목부에서의 shock train 현상도 잘 재현하고 있음을 알 수 있다.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.458-466
• /
• 2005

회분식 증류 공정을 모델링하기 위해서는 평형상수와 엔탈피값이 필요하며 이 값들은 열역학적인 계산 방법에 의해 계산된다. 석탄 유분인 coal tar의 경우에는 성분이 다양하고 coal tar내의 성분을 대부분 알 수 없으므로 가상성분으로 만들어 적절한 물성예측식을 사용하여 물성값을 계산해 주어야 한다. 본 연구에서는 기존의 물성예측식에 의해 계산된 값과 이미 알려진 coal tar 유분의 실제물성값의 차이를 기 개발된 물성예측식에 대해 비교하였고 물성예측식에 필요한 2개의 parameter(NBP, SG)대신 1개의 변수(NBP)를 사용하여 간단한 물성예측식을 도출하였다. 또한 이상 기체 열용량 예측식의 경우에도 같은 방법을 적용하였다. 개발된 물성 예측식 및 회분식 증류공정프로그램은 coal tar계에 적용하여 coal tar 중 유효성분 분리를 위해 효율적으로 적용할 수 있다 하겠다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1094-1100
• /
• 2014

오폐수처리, 해수담수화 및 식품산업의 경우 증발과정은 필수공정이며, 이는 기본적으로 용액으로부터 용매인 순수한 물성분을 추출하여 점차 용액의 농도를 증가시키는 방식이다. 농축을 위한 방식은 전기투석, 증발식, 막방식 등의 다양한 방법이 사용되고 있으나, 본 연구에서는 여러 산업분야에서 적용되고 있는 증발식을 대상으로 운전방식에 따른 가열열원의 소모량을 이론적으로 분석하고, 이에 근거하여 다단증발식 해수담수화설비의 운전특성을 파악하였다. 본 연구의 결과에 따르면 시스템에서 이용할 수 있는 전체 온도차, 즉 인입해수의 온도와 1단 증발부로 유입되는 해수온도와의 차를 기준으로 증발단의 수를 증가시킬수록 에너지효율이 상승함을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.2055-2061
• /
• 2013

청정대체 에너지로 관심이 고조되고 있는 바이오 에탄올의 경제적 생산은 고유가 시대에 있어 매우 중요하다. 분리공정에서 성공적인 정류탑의 설계에는 정확한 기-액 평형치가 이용된다. 2성분 Ethanol/3-methyl-1-butanol 계에 대하여 정온하 즉 50, 55, 60, 65, 70, 75 및 $80^{\circ}C$에서 2성분 기-액평형측정치를 측정하고, 그 측정치를 이용하여 기액평형치를 추산하는 추산식을 이끌어 내었다. 측정치와 추산치를 비교 검토한 결과 ${\pm}0.0005$, ${\pm}0.0022$의 범위 내에서 잘 일치함을 확인하였다.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.335-341
• /
• 2008

Thermal transport from vertical heated surface to falling liquid film in a channel has been investigated experimentally. Air-flow is introduced into channel to make a counter flow against falling liquid film. This problem is of particular interest in the design of direct contact heat exchange system, such as cooling tower, evaporative cooling system, absorption cooling system, and distillation system. The effects of channel width and air flow rate on the heat transfer to falling liquid film are studied in detail. The results obtained indicate that heat transfer rate is gradually decreased with an increase in the channel width without air flow as well as with air flow in a channel. It is also found that heat transfer rate of air-flow is increased while heat transfer rate of falling liquid film is decreased with an increase in the air flow rate at a given channel width. However, total heat transfer rate from the heated surface is increased as the air flow rate is increased.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.119-123
• /
• 2002

Liquefied Natural Gas(LNG) continues to attract modern gas industries as well as domestic markets as their main energy source in the recent years. This is mainly because LNG is inherently cleaner and more energy efficiency than other fuels. Offshore LNG production plant is of interest to many oil producing companies all over the world. This article discuss about the production process encountered while developing such a production facility. Typical offshore oil and gas processing required for oil stabilization and other optional units that can be added to the facilities. The production process can broadly be divided into five major units namely, (i) Oil Stabilization unit, (ii) Gas Treatment unit, (iii) Methane Recovery unit, (iv) Distillation unit and (v) LNG Liquefaction unit. The process simulation was carried out for each unit with a given wellhead composition. The topside facilities of offshore LNG production plant will be very similar to the process adopted in offshore processing platform along with the typical onshore LNG production plant. However, the process design problems associated with FPSO motion to be taken care of while developing floating LNG production plant.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.36-43
• /
• 2022

Breakthrough analysis has widely been explored for the dynamic separation of gaseous mixtures in porous materials. In general, breakthrough experiments measure the components of a flowing gas when a gaseous mixture is injected into a column filled with an adsorbent material. In this paper, we report on the design and fabrication of a breakthrough curve measurement device to study the dynamic adsorptive separation of hydrogen isotopologues in porous materials. Using the designed system, an experiment was conducted involving a 1:1 mixture of hydrogen and deuterium passed through a column filled with zeolite 13X (1 g). At room temperature, both hydrogen and deuterium were adsorbed in negligible amounts; however, at a temperature of 77 K, deuterium was preferentially adsorbed over hydrogen. The selectivity was different from that in the existing literature due to the different sample shapes, measurement methods, and column structures, but was at a similar level to that of cryogenic distillation (1.5).