• Development and Reproduction
• /
• v.19 no.3
• /
• pp.163-166
• /
• 2015

Genomic DNAs were extracted from the muscle of twenty-one specimens of three eel species collected in Anguilla japonica (AJ), Muraenesox cinereus (MC) and Conger myriaster (CM) from the Yellow Sea, respectively. In the present study, 7 oligonucleotides primers generated 191 specific loci in the AJ species, 226 in the (MC) species and 181 in the CM species, respectively. The primer BION-02 generated the most loci (a total of 83), with an average of 11.86 in the AJ species. The specific loci generated by oligonucleotides primers exhibited inter-individual-specific characteristics, thus revealing DNA polymorphisms. With regard to average bandsharing value (BS) results, individuals from Conger myriaster species (0.808) exhibited higher bandsharing values than did individuals from Muraenesox cinereus species (0.729) (P<0.05). The longest genetic distance (0.430) displaying significant molecular difference was also between individual no. 01 within Anguilla japonica eel species and individual no. 04 within Anguilla japonica species. In this study, the dendrogram resulted from reliable seven oligonucleotides primers, indicating three genetic clusters composed of group I (ANGUILLA 01~ANGUILLA 07), group II (MURAENESOX 08~MURAENESOX 14) and group III (CONGER 15~CONGER 21). The existence of species differentiation and DNA polymorphisms among three eel species were detected by PCR analysis. As mentioned above, a dendrogram revealed close relationships between individual identities within three eel species. High levels of a significant genetic distance among three eel species showed this PCR approach is one of the most suitable tools for individuals and/or species biological DNA studies.

• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.141-153
• /
• 2006

Genomic DNA samples isolated from two geographical crayfish (Cambaroides similis) populations in the inland of the Korean Peninsula, at Jeonju (Jeonju crayfish; JJC) and Jeongup (Jeongup crayfish; JUe), were PCR-amplified repeatedly. The six arbitrarily selected primers OPC-03, OPC-06, OPC-09, URP-02, URP07 and URP-09 generated the common, specific, and polymorphic fragments. The sizes of DNA fragments also varied widely, from 100 bp - 2,600 bp. Here, 521 fragments were identified in the JJC population, and 354 in the JUC population: 6 primers generated 60 specific fragments (60/521 fragment, 11.5%) in the JJC population, and 90 (90/354 fragments, 25.4%) in the JUC population. These primers produced 42 polymorphic fragments (8.1%) in the DC population, and 18 (5.1%) in the mc population. Especially these results demonstrate that the primers detected numerous specific fragments. Especially, the decamer primer OPC-06 generated inter-population-common DNA fragments, approximately 400 and 800 bp, respectively, in both the JJC and JUC populations. The universal primer URP-02 also generated inter-population-identical DNA fragments, approximately 350 bp and 600 bp, between the two geographical crayfish populations. Based on the average bandsharing values of all samples, the bandsharing value of individuals within the JJC population was much higher than in the JUC population. The bandsharing value between individuals no. 10 and no. 15 was 0.683, which was the highest between the two geographical populations. The dendrogram obtained by the six primers indicates two genetic clusters: cluster I (CRAYFISH 01 - CRAYFISH II), and cluster 2 (CRAYFISH 12 - CRAYFISH 22). The genetic distance between the two geographical populations ranged from 0.053 to 0.605. Ultimately, the longest genetic distance displaying significant molecular differences was found to exist between individuals in the two crayfish populations, between individuals CRAYFISH no. 02 of Jeonju and CRAYFTSH no. 15 of Jeongup (genetic distance = 0.605).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1430-1437
• /
• 2009

Functional bread was manufactured with single cell detritus (SCD) of sea tangle. The optimum ingredient formula for SCD bread was determined based on mixture model. Flour and water reduced max weight, strength, hardness and specific loaf volume, whereas the increased SCD reversed the volume change of dough. Flour increased $L^*$ and $b^*$ values of SCD bread, while SCD decreased. Flour and water decreased $a^*$ value, while SCD increased. Max weight, strength, hardness, specific loaf volume, $b^*$ value and water holding capacity (WHC) were linear model on ANOVA table, whereas distance, volume change of dough, $L^*$ and $a^*$ values were nonlinear model. The response constraint coefficient showed that SCD influenced texture of SCD bread more than flour and water did, whereas water influenced the volume change of dough, specific loaf volume and WHC more than flour and SCD did. Moreover, flour influenced color value more than did water and SCD. Distance and $a^*$ value fitted nonlinear model with interaction terms for flour-SCD and water-SCD. Optimum ingredient formula for SCD bread was: flour, 48.25%; water, 30.89%; SCD, 3.86%. Sensory evaluation of SCD bread was a little lower than industrial bread and electrolyzed SCD bread.

• ETRI Journal
• /
• v.15 no.3
• /
• pp.27-34
• /
• 1994

There have been traditional approaches to model radio propagation path loss mechanism both theoretically ad empirically. Theoretical approach is simple to explain and effective in certain cases. Empirical approach accommodates the terrain configuration and distance between base station and mobile unit along the propagation path only. In other words, it does not accommodate natural terrain configuration over a specific area. In this paper, we propose a spatial prediction technique for the mobile radio propagation path loss accommodating complete natural terrain configuration over a specific area. Statistical uncertainty analysis is also considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.168-179
• /
• 2013

The critical point analysis(CA) and impedance matching analysis(IA) are performed and compared for a 4-coil magnetic resonance wireless power transfer system. Because the operating frequency splits at short distance while the efficiency drops drastically at long distance in this system, the optimization technique is needed for either a specific distance or efficiency at the fixed frequency. CA uses the critical point where shows maximum efficiency in the entire range and IA uses the impedance matching technique to achieve maximum efficiency at the specific distance. Comparison result shows that IA is more efficient than CA. Also, it shows one side matching has a tradeoff relationship comparing to both side matching. By using four spiral resonant coils, the analysis was experimentally verified. The measured data agreed well with the calculated data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.100-108
• /
• 2017

Because of urbanization, Industrialization and expansion of transportation network, blasting works are recently increasing in construction field. The blasting work influences environmental effects to residents and the safety of facilities around the working place, so the development of blasting technology is needed to reduce the damage to residents. The blasting mechanism in the hole was studied and tested in the blasting sites by the difference of diameter between explosives and drilling hole, which is named by the decoupling effect. This effect was tested by changing the medium between explosives and hole wall in three working sites(railway, highway and industrial complex). The vibration velocity of blasting was recorded and vibration equations were produced by regression analyses. Finally, the structure separation distance was derived using these equations. The testing results show that the specific gravity of medium is larger, the separation distance is smaller and the duration time of blasting is shorter in case of large specific gravity of medium, so the vibration effect stops more fastly in the water compared with the air.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.63-69
• /
• 2022

In this paper, we propose a new GPU-based framework for quickly calculating adaptive and continuous SDF(Signed distance fields), and examine cases related to rendering/collision processing using them. The quadtree constructed from the triangle mesh is transferred to the GPU memory, and the Euclidean distance to the triangle is processed in parallel for each thread by using it to find the shortest continuous distance without discontinuity in the adaptive grid space. In this process, it is shown through experiments that the cut-off view of the adaptive distance field, the distance value inquiry at a specific location, real-time raytracing, and collision handling can be performed quickly and efficiently. Using the proposed method, the adaptive sign distance field can be calculated quickly in about 1 second even on a high polygon mesh, so it is a method that can be fully utilized not only for rigid bodies but also for deformable bodies. It shows the stability of the algorithm through various experimental results whether it can accurately sample and represent distance values in various models.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1831-1840
• /
• 2018

During a power swing, distance relays may mistakenly spread fault throughout the power grid, causing a great deal of damage. In some cases, such mistakes can cause global outages. For this reason, it is critical to make a distinction between power swings and faults in distance relays. In this paper, a new method is proposed based on RMS measurement to differentiate between faults and power swings. The proposed method was tested on two standard grids, demonstrating its capability in detecting a power swing and simultaneous fault with power swing. This method required no specific configurations, and was independent of grid type and zoning type of distance relays. This feature in practice allows the relay to be installed on any grid with any kind of coordination. In protective relays, the calculations applied to the microprocessor is of great importance. Distance relays are constantly calculating the current RMS values for protection purposes. This mitigates the computations in the microprocessor to detect power swings. The proposed method was able to differentiate between a fault and a power swing. Furthermore, it managed to detect faults occurring simultaneously with power swings.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.764-776
• /
• 2008

Image identification is the process of checking whether the query image is the transformed version of the specific original image or not. In this paper, image identification method based on feature composition is proposed. Used features include color distance, texture information and average pixel intensity. We extract color characteristics using color distance and texture information by Modified Generalized Symmetry Transform as well as average intensity of each pixel as features. Individual feature is quantized adaptively to be used as bins of histogram. The histogram is normalized according to data type and it is used as the signature in comparing the query image with database images. In matching part, Manhattan distance is used for measuring distance between two signatures. To evaluate the performance of the proposed method, independent test and accuracy test are achieved. In independent test, 60,433 images are used to evaluate the ability of discrimination between different images. And 4,002 original images and its 29 transformed versions are used in accuracy test, which evaluate the ability that the proposed algorithm can find the original image correctly when some transforms was applied in original image. Experiment results show that the proposed identification method has good performance in accuracy test. And the proposed method is very useful in real environment because of its high accuracy and fast matching capacity.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.267-275
• /
• 2021

This study investigates the relationship between cultural distance and entry mode choice, where the foreign investor firm and the host country are both from emergent economies. Within this framework, research is limited and the issue is whether companies, regardless of their specific situations, have the same strategy when they meet a high degree of uncertainty in the host environment. In this study, we focused on the influence of informal institutional factors: cultural distance, that has been extensively analyzed in international business, measured by Kogut and Singh index and defined according to Hofstede, Globe Project and Schwartz approaches. The general trend derived from prior research proves that when a company from a developed country is involved; overall more enthusiasm is shown for wholly-owned subsidiaries rather than joint venture. This result still stands validated for corporations from this emergent economy area. Our analysis of a sample of 163 FDI in the Kingdom of Saudi Arabia (KSA) using logistic binary regression model reveals that the foreign firms prefer to establish wholly-owned subsidiaries in the host country over entering into a joint venture with a local firm, taking into consideration the large cultural distance.