• The Journal of the Korean dental association
• /
• v.12 no.9
• /
• pp.691-694
• /
• 1974

The trends of restoration on abrased teethis mostly based on gnathology or on practical experience. This study was performed on plaster models from 60 young men whose teeth and occlusion are clinically normal. A pair, upper and lower models, were mounted on HANAU articulator. Iron ball bearing 0.2mm 0.5mm 0.7mm and 1.0mm in diameter was attached on mesiobuccal cusp of upper first molar. [table I] Long ribbon shape of cold cure resin was inserted and jaw was closed gently so as not to move disturb original position of iron ball. The resin bite registration was measured minimun thickness from each lingual cusps of upper jaw and buccal cusps of lower jaw by means of Bowley gauge. The results were as follows (graph). 1) The distance from upper lingual cusps and lower buccal cusps: backward cusps showed smaller than standard cusp (upper mesio-buccal cusp) and forward cusps showed longer than standard. 2) The measurements from upper lingual cusps are not coincide with lower buccal cusps.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.913-915
• /
• 2004

시술 중 제공되는 2D영상은 실시간으로 환자와 시술도구의 상태정보를 제공해주지만 환부의 입체적ㆍ해부학적 파악이 어렵다. 따라서 긴 촬영시간으로 시술 전 획득되는 3D영상과 시술 중 얻어지는 2D영상간 정합영상은 영상 유도술에 있어서 유용한 정보를 제공한다. 이를 위해 본 논문에서는 볼륨영상으로부터 혈관모델을 추출하고 이를 평면으로 투영하였다. 두 2D영상에서 정차대상이 되는 혈관골격을 추출한 후 혈관의 분기특성을 고려 한 초기정합을 수행하였다. 크기와 초기 위치를 맞춘 혈관골격을 골격간 거리가 최소가 되도록 반복적으로 혈관을 기하변환시키고 최종 변환된 혈관골격을 시술 중 제공되는 2D영상에 겹쳐 가시화 하였다. 이로써 시술시간 경감과 시술성공률 향상을 유도할 수 있는 시술경로맵을 제시하고자 하였다.

• Progress in Medical Physics
• /
• v.30 no.1
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.637-646
• /
• 2001

The multicasting telecommunication is an important research as an applicable technique in the development of adaptable technique for modern mobile computing and mobile IP, because that is supposed to be a solution for transferring the large-size information on the mobile and wireless network with the narrow bandwidth. This paper will suggest one solution for the bidirectional tunneling and the local re-registration problems to support transferring mobile multicasting datagram by the partitioned network. The bidirectional tunneling technique is in use for mobile host moving around in a region and the local re-registration technique for crossing regions to reduce traffic load caused by transferring datagram along a long distance, and we compare those models with our suggested model by simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.15-19
• /
• 2001

A dedicated reverse engineering(RE) system for rapid manufacturing of human head in a 3D bust has been developed. The first step in the process is to capture the surface details of a human head and shoulder by three scanners based upon the digital moire fringe technique. Then the multiple scans captured from different angles are aligned and merged into a single polygonal mesh, and the aligned data set is refined by smoothing, subdividing or hole filling process. Finally, the refined data set is sent to a 4-axis computer numerically control(NC) machine to manufacture a replica. In this paper, we mainly describe on the algorithms and software for aligning multiple data sets. The method is based on the recently popular Iterative Closest Point(ICP) algorithm that aligns different polygonal meshes into one common coordinate system. The ICP algorithm finds the nearest positions on one scan to a collection of points on the other scan by minimizing the collective distance between different scans. We also integrate some heuristics into the ICP to enhance the aligning process. A typical example is presented to validate the system and further research work is also discussed.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1222-1230
• /
• 2015

Segmentation of the anterior cruciate ligament (ACL) in knee MRI remains a challenging task due to its inhomogeneous signal intensity and low contrast with surrounding soft tissues. In this paper, we propose a multi-atlas-based segmentation of the ACL in knee MRI with locally-aligned probabilistic atlas (PA) in an iterative graph cuts framework. First, a novel PA generation method is proposed with global and local multi-atlas alignment by means of rigid registration. Second, with the generated PA, segmentation of the ACL is performed by maximum-aposteriori (MAP) estimation and then by graph cuts. Third, refinement of ACL segmentation is performed by improving shape prior through mask-based PA generation and iterative graph cuts. Experiments were performed with a Dice similarity coefficients of 75.0%, an average surface distance of 1.7 pixels, and a root mean squared distance of 2.7 pixels, which increased accuracy by 12.8%, 22.7%, and 22.9%, respectively, from the graph cuts with patient-specific shape constraints.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.991-1000
• /
• 2010

The Hierarchical Mobile IPv6 (HMIPv6) has been proposed to accommodate frequent mobility of the Mobile Node. HMIPv6 can effectively reduce the signaling overhead and latency. However, it has a problem that the registration of a mobile node concentrates on the furthest MAP(Mobility Anchor Point) when the mobile node enters into a new domain. This paper proposes a new load distribution mechanism by using the concept of Nash Bargaining Solution. The main advantage of the proposed scheme can prevent load concentration from being registered to the specified MAP based on the weight value according to the available resource-ratio of a MAP. With a simulation study, the proposed scheme can improve network performance under widely diverse traffic load intensities.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.103-111
• /
• 2012

In epigraph field to study ancient scripts, alternative readability improvement technologies have been developed to replace existing rubbing method which has low resolution and causes surface pollution of heritages from the viewpoints of extraction process and used materials. Recently many methods which are based on analysis of pixel data for extracting outlines of the specific image have been developed with advancement of image processing techniques. But these methods are not applicable and the results are not satisfied in the damaged inscriptions which are weathered by wind and rain for a long time and in the narrowed one. In this paper laser scanning techniques which uses optical triangulation measurement principle are developed to minimize scanning error. The proposed techniques are consisted of 3 parts：(1) the understanding of optical triangulation measurement principle to find scanning guideline (2) determinations of points interval, scanning distance and scanning angle to guarantee scanning data quality (3) identification of valid point data area which will be used in registration process. The proposed character identification method contributed in decoding an ancient inscription on SeukBingGo in Kyungju.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.1079-1089
• /
• 2021

The current study aims to examine the effect of Hofstede's dimensions of culture on the intention of sharing knowledge in higher education institutions (HEIs) in Jordan. In the literature, researchers have given limited attention to such an effect. Therefore, by adopting Hofstede's framework, the current study attempts to investigate how Jordan's cultural context impacts on the intentions to share knowledge in HEIs. This study applied quantitative research methods to investigate the effect of Hofstede's cultural dimensions on knowledge-sharing intentions. In total, 307 questionnaires were collected from employees in Jordanian universities and, then, tested using descriptive and regression analytical methods. The study results show that culture dimensions influence knowledge-sharing intention and that each dimension plays a different role in enhancing this knowledge-sharing intention. More specifically, it was found that long-term orientation, collectivism and high uncertainty avoidance had a positive effect on knowledge-sharing intention, while cultural masculinity and power distance had no negative effect. Based on these results, the study makes several recommendations, the most important of which is the promotion of cultural values that encourage intention to share knowledge. Also, more qualitative research is needed to explore in depth the effective means that encourage intentions to share different types of knowledge.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.5
• /
• pp.555-561
• /
• 2008

Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.