• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.135-139
• /
• 2012

A majority of 4G Mobile communication manufacturers have launched separated-type base stations composed of DU (digital unit) and RU (ratio unit). DUs are usually installed in the central office, while RUs with antennas are installed on the top of building or pole. Therefore, the allowable distance between DU and RU is very important for cell planning. In this paper, we analyze the allowable distance between DU and RU induced by closed-loop MIMO (mulitple input multiple output) technology in 4G FDD (frequency division duplexing) mobile communication systems. In conclusion, the distance limit between DU and RU is dependent on the frequency of the wireless communication, and the allowable distance is about 11 km when assuming the operating frequency is 2 GHz.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1092-1099
• /
• 2011

This paper is concerned with the ATO speed profile generation method in the moving block system. The ATO speed profile is calculated using the acceleration limit and the jerk limit to improve ride comfort. In addition, the speed limit and stop distance provided from ATP profile should be considered to ensure safety. In the moving block system, the speed limit and the stop position are frequently changed in real-time. Therefore, the ATO speed profile should be regenerated immediately according to change of the speed limit and the stop position, within the acceleration limit and the jerk limit. In this paper, the ATO speed profile generation method is proposed, which considers not only frequent changes of the speed limit and the stop position but also acceleration limit and jerk limit. Futhermore the simulation result is presented to verify usefulness of this method.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.16-21
• /
• 2017

A systematic understanding of the effects of high-intensity flash sources on the human eye is strongly needed, not only for proper use of the sources, but for human eye health. In this study, the exposure-limit distance (ELD), indicating the minimal safe distance in case of seeing by chance a high-intensity flash, is proposed. The optical procedures to determine the ELD of a high-intensity flash are clarified, and the dependence of ELD on its parameters such as luminous intensity, duration, and radius of a flash are thoroughly investigated. From this investigation it is obvious that, while being weakly dependent on duration, the ELD is nearly proportional to the luminous intensity and the radius of a flash. The proposed ELD as an intuitive safety-indicating parameter is more useful and intuitive than the other characteristic parameters of a high-intensity flash. The ELD is expected to be an essential parameter as a safety indicator, to characterize the performance of a high-intensity flash and to promote the safety of the human eye.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• Korean Journal of Environment and Ecology
• /
• v.28 no.4
• /
• pp.393-403
• /
• 2014

The aim of this study was to use the information deduced from biotopemap in Boryeong, Chungnam province conducted in 2011 and to select the wildlife survey point. The information used for the study was deduced from the knowledge and experience of wildlife specialists and was realized by 6 environmental variables (Outside distance from food vegetation, Outside distance from farm land, Outside distance from forest, Human density, Outside distance from road, Outside distance from water). 6 environmental variables were modeled by map overlay method and the model could deduce the correlation of 94.72% as a result of comparing with occurrence information. The areas predicted to have many occurrences were rural landscapes, forests, and valleys, and they can be used to deduce the quality wildlife survey results in the limit of survey range (area, schedule, and budget). However, it had the limit points such as the inside of forests was excluded, all species did not prefer the same habitat. The following studies are needed for this part in the future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.48-59
• /
• 2018

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.495-507
• /
• 2009

The expected sliding distance for the lifetime of a caisson breakwater has a limitation to be used as the stability criterion of the breakwater. Since the expected sliding distance is calculated as the mean of simulated sliding distances for the lifetime, there is possibility for the actual sliding distance to exceed the expected sliding distance. To overcome this problem, the exceedance probability of the allowable sliding distance is used to assess the stability of sliding. Latin Hypercube sampling and Crude Monte Carlo simulation were used to calculate the exceedance probability. The doubly-truncated normal distribution was considered to complement the physical disadvantage of the normal distribution as the random variable distribution. In the case of using the normal distribution, the cross-sections of Okgye, Hwasun, and Donghae NI before reinforcement were found to be unstable in all the limit states. On the other hand, when applying the doubly-truncated normal distribution, the cross-sections of Hwasun and Donghae NI before reinforcement were evaluated to be unstable in the repairable limit state and all the limit states, respectively. Finally, the shortcoming of the expected sliding distance as the stability criterion was investigated, and we reasonably assessed the stability of sliding of caissons by using the exceedance probability of allowable sliding distance for the caisson breakwaters in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.111-122
• /
• 2012

There has been a strong demand for providing diverse services to drivers utilizing existing ITS infrastructure. To this end, this study is aiming at improving the accuracy of a variable speed limit system by determining recommended speeds for the system utilizing the information from Urban Traffic Information System(UTIS) and Weather Information System(WIS). In order to determine appropriate speed limits under inclement weather conditions for the variable speed limit system, this study examined three methods: i) the method utilizing the information from WIS, ii) the method utilizing the information from UTIS, and iii) the method which combines the information from WIS and UTIS using different weights for diverse weather conditions. Finally, this study selected the third method which determines an appropriate speed limit using the relationship between the vehicle operating speed and the minimum stopping distance which is estimated using the existing speed limit, surface coefficient of friction and superelevation.

• Journal of the Chungcheong Mathematical Society
• /
• v.11 no.1
• /
• pp.45-51
• /
• 1998

In this paper, we shall define the usual fuzzy distance between two real fuzzy points, using the usual distance between two points in $\mathbb{R}$. We introduce the fuzzy sequence in the fuzzy real line and the notion of limit of fuzzy sequence in $F_p(\mathbb{R})$, and obtain the fuzzy increasing(decreasing) sequence and fuzzy Cauchy sequence of real fuzzy points.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.103-106
• /
• 2003

In this study, an ultrasonic transducer is fabricated with 1-3 type composite resonators. Pulse-echo responses of an ultrasonic transducer are investigated in underwater dependent on the variable designated water-level. LED Output signals of a level limit with changing a water level is obtained by the 1-3 type self-made composite transducer and electric measuring unit. LED is turned on at above the up-limit level with increasing a water level, and LED is turned on at less than the down-limit level with decreasing a water level. There was good agreement between the virtual water level and output LED signal by using the self-made water-detecting system.