• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.562-573
• /
• 2008

Concentrations of volatile organic compounds (VOCs) measured from the local industrial sources in Wanju industrial complex during June $2007{\sim}January$ 2008. The samples were collected from the primary sources (6 emission points) in 4 major factories in Wanju industrial complex as well as two general sources in Wanju County to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; fabricated metal manufacture, motor vehicle manufacture, rubber and plastic manufacture, and chemical manufacture factories. Two general source samples were collected from gasoline gas station and dry cleaning shop in urban area. In order to understand the near source influence at receptor, samples from the two receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected with sample canister, and analyzed by using GC/MSD. The concentrations from different sources were compared and discussed. The mass contributions of the speciated VOCs to total VOCs measured from industrial sources and ambient ai r at two receptors were presented and discussed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.207-218
• /
• 1993

The purpose of this study was to evaluate the reproducing accuracy of stone casts made from complete arch impressions using different impression materials. The impression materials studied were 1) polyether, 2) polysulfide, 3) polyvinyl siloxane, and 4) irreversible hydrocolloid. Impressions were made from a partially edentulous acrylic resin model with metal inserts in canine, first molar region bilaterally and mid palatal vault region. Each distance between 2 out of 5 meauring points was measured by using 3dimensional measuring machine. Impressions were poured at once with a type IV dental stone. Data were analyzed using t-test with a sample size of six. The results were as follow : 1. Polysulfide and polyether were significantly superior to polyvinyl siloxane and irreversible hydrocolloid in reproducing full arch model(p<0.05), but there were no statistical differences in amount of dimensional reproducing accuracy for full arch impression between polysulfide and polyether(p>0.05). 2. There were statistical differences in amount of dimensional reproducing accuracy between edentulous area and tooth bound area for polysulfide and polyether(p<0.05). but no statistical differences were observed for polyvinyl siloxane and irreversible hydrocolloid(p>0.05).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1182-1188
• /
• 2005

In this paper, various power delay profiles (PDP) are simulated to study the influence of the PDP shape on the bit error rate (BER) performance of Orthogonal Frequency Division Multiplexing (OFDM) communication systems. Assuming Rayleigh fading with 16-QAM modulation scheme, the simulation focuses on the investigation of the various shapes of the PDP which are often characterized by peaks, slope, attenuation and distance of an echo profile of waves. This yields information about the properties of the channel, and can be applied to decide the performance of the systems according to the channel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.133-138
• /
• 2001

The high-speed data service is on the increase and on the development because of using the coaxial cable which hold the most part of subscriber's loop, the transmission rate in a subscriber line has influenced by an external-electromagnetic factor such as the falling of a thunderbolt and the electromagnetic induction on transmission line. this external environment gets the noise of a communications line and then has an influence to the transmission speed and quality for the high-speed data service. this paper makes an analysis of noise characteristic appeared a subscriber communications line, measures a transmission speed per each cable-distance and resolves these relationship by putting the noise, which has affected extensively the transmission quality of ADSL service, into a subscriber line.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.611-618
• /
• 2001

The flow characteristics of a turbulent buoyant jet were experimentally investigated using a single-frame PIV system. The Reynolds number based on the nozzle exit velocity and nozzle diameter was about Re=5$\times$10$^3$. The instantaneous velocity fields in the streamwise plane passing the jet axis were measured in the near field X/D <11 with and without the temperature gradient. By ensemble averaging the instantaneous velocity fields, the spatial distributions of mean velocity, vorticity, and higher-order statistics up to third order were obtained. The temperature difference of 10$\^{C}$ does not affect a significant influence to the flow structure in the near field, but the total entrainment rate is increased slightly. The entrainment rate shows a linear variation with the streamwise distance in the region after X/D=5.0.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.101-108
• /
• 2013

The purpose of this research was to analyze the correlation of residential satisfaction and the size of housing unit in apartment housing through the case study of 1,619 samples of 36 housing estates. The contents of this research consisted of two main parts. The first part was to identify the differences of residential satisfaction of dwellers, based on the size of housing unit, in apartment housing. The second part was to analyze the characteristics of residential environment, which might have an influence on the differences of residential satisfaction. the findings of this study were that the residential satisfaction of dwellers was proportional to the size of housing unit except $39m^2$ under housing unit, and the size of housing unit was not proportional to the residential satisfaction of outdoor openness exactly, but the size of housing unit was proportional to increase of the distance between building and building, and decrease of the building surface coverage ratio to outdoor area. This research will contribute to the establishment of the site planning methods which increase residential satisfaction in apartment housing, while promoting the quality of residential environment in Korea.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.5
• /
• pp.561-569
• /
• 2020

Objectives: The purpose of this study is to investigate the interaction and satisfaction of with web-based lectures. In addition, it seeks identify their correlations as well as the factors that influence satisfaction. Methods: The study subjects consisted of 139 college students taking up dental hygiene from Suncheon. ANOVA, correlation analysis, and regression analysis were used on the data collected. The Cronbach's alpha for interaction and satisfaction were 0.949 and 0.921, respectively. Results: The interaction recorded was moderate compared to face-to-face lectures. In particular, interaction between students was higher among 3rd grade students compared to those in the 1st grade (p=0.002). Satisfaction with the appropriateness of lecture content and duration was high, but relatively low in terms of the quality of the lecture and the desire to broaden its scope. In particular, satisfaction was higher among students in higher grade levels than their more junior counterparts (p<0.05). It was also found to be positively correlated with interaction (p<0.01). Their respective presence on the educational platform had the greatest impact on satisfaction (β=0.495, p<0.001). Conclusions: Increased interaction results in greater levels of satisfaction. Furthermore, an improvement in the quality of the lectures and the students' perception of them would enable lectures to be conducted more effectively in situations wherein face-to-face lectures cannot be done.

• Journal of Environmental Impact Assessment
• /
• v.21 no.4
• /
• pp.567-572
• /
• 2012

This paper suggests the set-up plan of the assessment scope in road noise considering road characteristics with the prediction model of road noise. The RLS90 prediction model with some assumptions is used to establish the assessment scope of road noise. The main contents of the applied assumptions are smooth drive of cars, flat region, location of all noise sources in one lane, drive in design speed, and set-up of assessment scope according to traffic volume and car speed. The information of traffic volume to predict road noise is obtained by the distribution of small cars and full-sized cars in road. In this study, the total traffic volume in road is computed by adding the number of small cars to the conversion number of small cars, which means the number of small cars making the same noise as one full-sized car. The prediction result of road noise with the influence factor of traffic volume, car speed, distance between road and receiver is presented. The resultant assessment scope of road noise is obtained by combining road noise prediction data with the set-up standard of road noise assessment scope.

• Tribology and Lubricants
• /
• v.25 no.4
• /
• pp.231-235
• /
• 2009

In this study, the influence of contact pressure on the variation in coefficients of friction between porcine knee joint cartilage and Co-Cr alloy in a repeat pass sliding motion was investigated. Flat-ended cartilage pin specimens(9 mm diameter, 8 mm long) were prepared from porcine(6 months old) knee joints by a drill-type punch. Friction tests were conducted by using a pin-on-disk type friction tester for an hour in PBS lubricated condition under the contact pressures of 0.5, 1 and 2 MPa with 50 mm distance per a cycle at ambient condition. As a result, coefficients of friction increased as the test duration increased for all contact pressures. The maximum coefficients of friction were 0.082, 0.06 and 0.098 for 0.5, 1, and 2 MPa, respectively. It showed that coefficients of friction of porcine knee joint cartilage against Co-Cr alloy depended on the level of contact pressure and related to squeeze film lubrication mechanism.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.9
• /
• pp.797-804
• /
• 2010

In case of the construction equipment using by the military camp, such equipments are different from those equipments using at general construction site, of which muffler(silencer) is attached at the passenger seat side, since such equipments are obsoleted, it is great part that a considerably loud noises are continuously diffusing. When working, such noise can be influenced a lot of effects to those working soldiers nearby the equipment, and though it is really terrible loud noise as much as can arise a civil complaints by neighboring civilians, but because its specialty of the military, it is real state that there are many difficulties in establishing an effective soundproof countermeasure due to study shortage and lack of the relevant material regarding to military construction equipment. Accordingly, this study has ever grasped the characteristics of noise by its each frequencies and by distances about those 9 kinds of construction equipments using chiefly by the military camp. As the result, it was known that the military construction equipment is generating the loud noise which can influence bad effect to the workers, and such high sound pressure level of low frequency band can harm even to far distance.