• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.57-62
• /
• 2015

A large variety of pipe flanges are required in the marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and has been widely used for a long time; however, it results in high development costs and low productivity, and the products made through this approach usually have safety problems in the welding area. In this research, a new approach for forming pipe flanges based on cold forging and the floating die concept is presented. This innovative approach increases the effectiveness of the material usage and saves time and costs compared with the conventional welding method. To ensure the dimensional accuracy of the final product, finite element analysis (FEA) was carried out to simulate the process of cold forging, and orthogonal experiment methods were used to investigate the influence of four manufacturing factors (stroke of distance, pin die angle, forming of pipe diameter, and speed of the die) and predict the best combination of them. The manufacturing factors were obtained through numerical and experimental studies, which show that the approach is very useful and effective for the forming of pipe flanges and could be widely used in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.5
• /
• pp.368-373
• /
• 2002

The strip intercropping system has used due to many advantages. Many researches supported these crop systems are usually equal to or better than monoculture crop systems in both total production and profit. There was no research to examine the important ecological factors in the competition between crops. A strip intercropping system composed of adjacent narrow strips of corn, soybean, and oat/legumes has been investigated in Iowa, USA. This study conducted to investigate why and how the differences in soybean yield are produced and affected by light, one of the microclimate, of the strip intercropping system. In height, the two rows of soybean closest to corn were taller than the two rows near the then-empty oat strip. The height of each crop decreased as the amount of light received increased. Weight of plant parts was lowest in row 1, nearest corn, and highest in row 4, next to the vacant oat strip. Daily photon flux density(PFD) increased with increasing distance from corn, with the highest value occurring on the edge next to the empty oat strip. Analyses of the relationship between light and biomass of soybean showed that all biomass measurements had a positive relationship to total PFD per day except height.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.209-215
• /
• 2002

A study of the guideway vehicle was made for a comparison of ride stabilities between its two primary steering types; one is the front wheel steering and the other the front-rear wheel. A numerical model as a closed loop system was built for an investigation of various factors to have an influence on the vehicular critical speed which is closely associated with ridabilities. It was shown that dynamics stabilities of the front steering type was much better over a large value of steering gain and the longer distance between front axle and guide link for both types provided better stabilities as well. A large steering gain ratio of the front to the rear significantly plays an important role in an improvement of stability in the front-rear steering. To observe a qualitative trend on stability behaviors, the root locus was obtained by considering a time lag which may be frequently caused by the complicated steering mechanism. In performing so, the appropriate selection of steering gain had a greater effect on the front-rear steering vehicle far more ride comfort. In addition, the dynamics model proposed here can be utilized for a more accurate evaluation on the vehicle design in lateral or yawing absorber and moreover expanded for the analysis of independent four-wheel steering vehicle.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.3
• /
• pp.202-209
• /
• 2003

A simply supported beam subjected to a uniformly distributed tangential follower force and the two successively moving spring-mass systems upon it constitute this vibration system. The influences of the velocities of the moving spring-mass system, the distance between two successively moving spring-mass systems and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a simply supported beam by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a simply supported beam without two successively moving spring-mass systems, and three kinds of constant velocities and constant initial displacement of two successively moving spring-mass systems are also chosen. Their coupling effects on the transverse vibration of the simply supported beam are inspected too. In this study the simply supported beam is deflected with small vibration proportional to natural frequency of the moving spring-mass systems. According to the increasing of initial displacement of the moving spring-mass systems the amplitude of the small vibration of the simply supported beam is increased due to the spring force. The velocity of the moving spring-mass system more affect on the transverse deflection of simply supported beam than other factors of the system and the effect is dominant at high velocity of the moving spring-mass systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.687-691
• /
• 2007

It is important to increase the sound proof performance of building for reducing the influence of aircraft noise on the bais of actual survey of existed buildings. The purpose of this study is to propose the basic data for designing sound insulation of residential house. In this study, field measurement of aircraft noise Interior and outside noise level difference were carried out for 7 days in 2 residential houses. As the result, aircraft noise levels showed to be Leq $71.8{\sim}74.5$dB(A), WECPNL $82.2{\sim}83.4$ and indoor noise level were NC-55 ${\sim}63$ over acceptable NC-30 in 2 measured houses. Noise reduction effect showed to be $15.8{\sim}23.1$dB(A) in measured houses, and houses with double window were preferable to those with single window in sound proof performance. The outside sound pressure level for residential house was a little different according to the type of source. In measuring by using aircraft noise it was effected by angle and distance from measuring point, to aircraft, window area, and sound absorption of room, and so on.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.1
• /
• pp.75-82
• /
• 2014

PURPOSE: PURPOSE: The purpose of this study was to analyze the effect and examine the feasibility of an intervention of ankle strategy exercise on balance of patients with hemiplegia. METHODS: The subject were randomly allocated to three groups: ankle strategy exercise (group A), balance exercise (group B) and control (group C). Group A was received the conventional physical therapy plus ankle strategy exercises for 20 minutes in one session. Group B was received the same conventional physical therapy plus balance exercises for 20 minutes in one session. Two active groups were performed in the session 3 times a week, for a total of 6 weeks. and Group C was only received the same conventional physical therapy. Balance test was assessed using center of pressure (COP) in the anteroposterior (A-P), mediolateral (M-L) direction, Berg balance scale (BBS) and Timed Up and Go Test (TUG). RESULTS: All groups showed improvements in balance parameters. In especial, the Group A was statistically significant differences in almost part evaluation items and showed more improvements in BBS and TUG parameters than Group B and Group C. and moving distance of M-L COP was more improvements than Group B. CONCLUSION: Ankle strategy exercises had more influence on balance than balance exercises and neurodevelopmental treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.4
• /
• pp.287-293
• /
• 2016

A monobloc tubular drive shaft is designed to obtain the improved structural safety and the weight reduction of the drive shaft together. The monobloc tubular drive shaft can be manufactured from an incremental hot rotary forging process. The aim of this study was to experimentally determine conditions of an incremental hot rotary forging process for a monobloc tubular drive shaft. Induction heating experiments were performed to estimate a proper heating time of an initial workpiece in an induction heating process. Several incremental hot rotary forging experiments were carried out using a mechanical press with the designed set-up. The step distance and the step angle were chosen as controllable forming parameters. Based on the results of the experiments, the influence of forming parameters on the quality of the forged part was investigated. Finally, a forming map and a proper forming condition of the incremental hot rotary forging process were estimated.

• Journal of Ecology and Environment
• /
• v.33 no.3
• /
• pp.237-244
• /
• 2010

In this study, we evaluated the distribution, habitat characteristics, and diet of two Korean freshwater turtle species (Chinemys reevesii, Pelodiscus sinensis) and an invasive turtle species (Trachemys scripta elegans) in the area surrounding the Seomjin River and the Nam River. We surveyed basking turtles in multiple locations along a 48-km stretch of the Seomjin River and in 99 reservoirs distributed along the Seomjin and Nam rivers from June to September, 2009. We observed 8 and 6 red-eared turtles in 3 reservoirs and at 3 sites in the Seomjin River, respectively, and 33 Reeve's turtles in 9 reservoirs. There were also 28 and 16 mud turtles detected at 15 sites along the Seomjin River and in 8 reservoirs, respectively. Among the 14 biotic and abiotic habitat characteristics that might influence the abundance of freshwater turtles in reservoirs, only the distance between a reservoir and the nearest residential areas was correlated negatively with abundance. With regard to the diet, all Reeve's and red-eared turtles investigated were determined to forage on water snails. Some turtles also foraged on vegetation and aquatic invertebrates. Additionally, we found fish in the stomach of one of the Reeve's turtles, and dragonflies in the stomachs of two red-eared turtles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.790-797
• /
• 2001

A simple computer vision technology to measure the middle-ranged depth with a mono camera and a plain mirror is proposed. The proposed system is structured with the rotating mirror in front of the fixed mono camera. In contrast to the previous stereo vision system in which the disparity of the closer object is larger than that of the distant object, the pixel movement caused by the rotating mirror is bigger for the pixels of the distant object in the proposed system. Being inspired by such distinguished feature in the proposed system, the principle of the depth measurement based on the relation of the pixel movement and the distance of object is investigated. Also, the factors to influence the precision of the measurement are analysed. The benefits of the proposed system are low price and less chance of occlusion. The robustness for practical usage is an additional benefit of the proposed vision system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.218-221
• /
• 2003

In this report, we test the features that the outside environment of subscriber lines have an effects on ADSL's electrical transmission performance with a suspected cases of line. I observed an influence of AM broadcasting jamming, and also analysis of an incoming lines of various kinds, a line distance, a connection way, Bridge Tap influencing ADSL's electrical transmis-sion performance. To have a maximum effect of Adsl electrical transmission, I came to a conclusion that we have to make use of the older copper wire cable line to fit the situation at the present and we must change it into the excellent optical fiber cable one by one.