• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.4
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.383-389
• /
• 2013

Demand for high-rising building has arisen. However, its maintenance is usually executed by labour. It could have a severe problem. We proposed a gondola robot to solve it. In this paper, we designed a height estimation sensor for this gondola. It is consist of pan-tilt unit, ARS sensor, and laser sensor. The pan-tilt unit keeps the laser sensor to indicate the gravity direction by referencing the ARS. The laser sensor's range is vertical distance from gondola to ground. However, if there is an obstacle under the gondola, the distance includes its height. To filter it out, we apply a Kalman filter for the height estimation. If the estimated height is changed extremely, the filter decides that there is an obstacle. Then, it remembers the height of obstacle. Other extreme changes of height estimations are reflected. The experimental results using the proposed sensor system show detail flow of the height estimation.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.263-266
• /
• 2000

We proposes a new fingerprint minutia matching algorithm which matches the fingerprint minutiae by using adaptive distance. In general, fingerprint is deformed by pressure and orientation when a user press his fingerprint to sensor. These nonlinear deformations change the distance between minutiae and reduce verification rate. We define the adaptive distance using ridge frequency. Adaptive distance normalizes the distance between minutiae and compensates for nonlinear deformation. Our algorithm can distinguish two different fingerprints better and is more robust. Experimental results show that the performance of the proposed algorithm is superior to using Euclidean distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1237-1242
• /
• 2017

Computer vision is coming more interesting with new imaging sensors' new capabilities which enable it to understand more its surrounding environment by imitating human vision system with artificial intelligence techniques. In this paper, we made experiments with Kinect camera, a new depth sensor for object detection and distance measurement functions, most essential functions in computer vision such as for unmanned or manned vehicles, robots, drones, etc. Therefore, Kinect camera is used here to estimate the position or the location of objects in its field of view and measure the distance from them to its depth sensor in an accuracy way by checking whether that the detected object is real object or not to reduce processing time ignoring pixels which are not part of real object. Tests showed promising results with such low-cost range sensor, Kinect camera which can be used for object detection and distance measurement which are fundamental functions in computer vision applications for further processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.183-190
• /
• 2014

In this paper, we propose a transmission scheme to reduce energy consumption on wireless multi-channel sensor networks. This proposed scheme differentiates the number of usable channels based on a priority. Sensor nodes consume the most energy to transmit data. Also, as transmission distance is far, they consume the more energy. Therefore retransmission due to transmission failure of sensor nodes that are long transmission distance is required more energy consumption. In this paper, we provide a stable transmission environment by allocating a high priority for data that is sent far away. The received data with a high priority is more allocated the number of usable channels. In the experiment results, the receiving failure probability and the restransmission energy consumption of proposed scheme is superior to ones of comparison scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.774-780
• /
• 2009

This paper proposes a transmitted power saving method for underwater acoustic sensors considering the acoustic wave propagation characteristic that propagation loss increases more rapidly in higher frequency band. In the proposed scheme, sensor nodes are divided into a few groups based on the distance between sink node and the sensor node, and each group uses its own frequency band. The node group with longer distance uses lower frequency and the node group with shorter distance uses higher frequency. By means of such a distance-dependent frequency allocation, all sensor nodes are able to maintain a certain target signal-to-noise ratio (SNR), but also save transmitted power. In addition, the optimum size of node group is obtained, and also a frequency allocation algorithm is proposed accordingly. Numerical results show that the proposed scheme saves transmitted power by more 10 dB comparing non-grouping methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.289-290
• /
• 2012

This paper propose the distance measurement algorithms using the 3-axis accelermeter sensor. This algorithms is based on the human gait charateristic. The proposed algorithms used the sampling data from the 3-axis accelermeter sensor. We improved the error rate as less than eight-percent compare the real movement distance with measured distance to apply the threshold value and the additional value according to the change of the acceleration value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1300-1305
• /
• 2012

In this research, we propose a momentum measurement system using the accelerometer sensor, MCU, and Bluetooth to measure the exact momentum. The proposed system can figure out information for the real time travel distance. We performed various experiments, and analyzed the results using the proposed momentum measurement system. In the simulation experiments, we compared the reliability and accuracy for the existing momentum measurement systems from the analyzed results. The proposed system showed travel distance error of less than 8% as compared to the existing system with the error of approximately 13%. We expect that the proposed system apply to the commercial products.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.398-407
• /
• 2023

We explored a method to evaluate imaging performance for the optimal assembly of an endoscopic miniature lens and a sensor constituting an imaging module at the distal end of gastrointestinal endoscopy. For the assembly of the imaging module, the image sensor was precisely located at the focal plane when collimated light passed through the endoscopic lens. As another method, the distance between the lens and sensor was adjusted to obtain the highest focus index from images measured the star chart of the International Organization for Standardization (ISO) standard at various positions. We analyzed the slanted-edge modulation transfer function (MTF), corresponding depth of field, and number of line pairs for MTF 50% and 20% at each working distance within the range of 5-100 mm for imaging modules assembled in different ways. Assembly conditions of the imaging module with better MTF performance were defined for each working distance range of 5-30 mm and 30-100 mm, respectively. In addition to the MTF performance, the focus index of each assembled module was also compared. In summary, we examined the performance of imaging modules assembled with different methods within the suggested working distance and tried to establish the optimal assembly protocol.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.55-63
• /
• 1998

Among the position sensing methods available, the arc sensor which utilizes the electrical signal obtained from the welding arc itself is one of the most prevalently used methods, because it has an advantage that no particular sensing device is necessary and real-time sensing of a groove position is possible directly under the arc. The authors have already developed a seam tracking system that contains a new arc sensor algorithm, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. In this study a torch height control algorithm for automatic weld seam tracking was proposed for completing the previous system, which uses an on-off control technique. To implement the torch height control algorithm during weld seam tracking the system parameters which include 2nd averaging range, weighting factor for 2nd moving averaging, and Z-directional basic compensation distance were determined by experimental analysis. Finally the two different height control methods, one is simple on-off control and the other on-off control using a reference current value , were compared in their tracking abilities.