• Applied Microscopy
• /
• v.52
• /
• pp.5.1-5.10
• /
• 2022

The use of Pipelines for long-distance transportation of crude oil, natural gas and similar applications is increasing and has pivotal importance in recent times. High specific strength plays a crucial role in improving transport efficiency through increased pressure and improved laying efficiency through reduced diameter and weight of line pipes. TRIP-based high-strength and high-ductility alloys comprise a mixture of ferrite, bainite, and retained austenite that provide excellent mechanical properties such as dimensional stability, fatigue strength, and impact toughness. This study performs microstructure analysis using both Nital etching and LePera etching methods. At the time of Nital etching, it is difficult to distinctly observe second phase. However, using LePera etching conditions it is possible to distinctly measure the M/A phase and ferrite matrix. The fraction measurement was done using OM and SEM images which give similar results for the average volume fraction of the phases. Although it is possible to distinguish the M/A phase from the SEM image of the sample subjected to LePera etching. However, using Nital etching is nearly impossible. Nital etching is good at specific phase analysis than LePera etching when using SEM images.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.498-509
• /
• 2021

The wake turbulence at the wingtip of preceding aircraft may affect the normal operation of following aircraft. Aircraft are classified into four categories according to their maximum take-off weight, and horizontal separation is applied with this category matrix. The FAA and EUROCONTROL revealed that the magnitude and effect of preceding aircraft wake turbulence were smaller than the current distance separation minima suggest. This new information presents the opportunity for revising wake turbulence minima into seven categories (RECAT). This paper confirms the feasibility of implementing RECAT at major airports in South Korea using the draft of ICAO Doc. 10122. The paper also calculates the ultimate runway capacity of Incheon International Airport in South Korea using the Harris Model and comparatively analyzes the amount of runway capacity. As a result of the analysis, it was confirmed that the implementation of RECAT could increase the ultimate runway capacity of Incheon International Airport. This paper's calculation methods and results can be used as primary data for implementing RECAT in other airports.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.1042-1058
• /
• 2024

Terahertz (THz) communication is becoming a key technology for future 6G wireless networks because of its ultra-wide band. However, the implementation of THz communication systems confronts formidable challenges, notably beam splitting effects and high computational complexity associated with them. Our primary objective is to design a hybrid precoder that minimizes the Euclidean distance from the fully digital precoder. The analog precoding part adopts the delay-phase alternating minimization (DP-AltMin) algorithm, which divides the analog precoder into phase shifters and time delayers. This effectively addresses the beam splitting effects within THz communication by incorporating time delays. The traditional digital precoding solution, however, needs matrix inversion in THz massive multiple-input multiple-output (MIMO) communication systems, resulting in significant computational complexity and complicating the design of the analog precoder. To address this issue, we exploit the characteristics of THz massive MIMO communication systems and construct the digital precoder as a product of scale factors and semi-unitary matrices. We utilize Schatten norm and Hölder's inequality to create semi-unitary matrices after initializing the scale factors depending on the power allocation. Finally, the analog precoder and digital precoder are alternately optimized to obtain the ultimate hybrid precoding scheme. Extensive numerical simulations have demonstrated that our proposed algorithm outperforms existing methods in mitigating the beam splitting issue, improving system performance, and exhibiting lower complexity. Furthermore, our approach exhibits a more favorable alignment with practical application requirements, underlying its practicality and efficiency.

• Korean Journal of Ichthyology
• /
• v.18 no.4
• /
• pp.300-310
• /
• 2006

Genomic DNA isolated from three geographical gizzard-shad (Konosirus punctatus) populations in Seocheon (SC), Busan (BS) and Gochang (GC) collected in the West Sea and the southern sea, respectively, off the Korean Peninsula, were PCR-amplified repeatedly. Eight selected decamer and 20-mer primers generated a total of 713 loci in the SC population, 791 in the BS population, and 732 in the GC population, with a DNA fragment size ranging from 100 bp to 2,800 bp. We identified 50 unique loci for the SC population, 70 unique loci for the BS population and 130 for the GC population: 120 shared loci for the three populations. There were 108 specific loci (15.1%) for the SC population, 74 (9.4%) for the BS population, and 67 (9.2%) for the GC population. Eight primers also generated 48 polymorphic loci (6.7%) for the SC population, 26 (3.3%) for the BS population, and 16 (2.2%) for the GC population. The similarity matrix ranged from 0.756 to 0.936 for the SC population, from 0.800 to 0.938 for the BS population, and from 0.731 to 0.959 for the GC population. The dendrogram obtained by the eight primers indicates three genetic clusters: cluster 1 (SEOCHEON 01~SEOCHEON 10), cluster 2 (BUSAN 11~BUSAN 20 and GOCHANG 23~GOCHANG 24), and cluster 3 (GOCHANG 21, 22, 25, 26, 27, 28, 29 and 30). As stated above, some individuals of the GC population appear to belong in BS population. When seeing this result, it was thought with the fact that some individuals of 2 populations seem to come and go partially. Thus, RAPD-PCR analysis revealed a significant genetic distance between the three geographical gizzard-shad populations. Using various decamer and 20-mer primers, RAPD-PCR may be applied to identify specific/polymorphic markers that are particular to a species and geographic population, and to define genetic diversity, polymorphisms, and similarities among geographical gizzard-shad populations.

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1442-1446
• /
• 2008

Seven populations of 586 Hanwoo have been characterized by using 10 microsatellite DNA markers. Size of microsatellite markers decided using GeneMapper Software (v.4.0) after analyze in kinds of ABI machine of name of 3130. Frequencies of microsatellites markers were used to estimate heterozygosities and genetic distances. Genetic distancesbetween populations were obtained using Ne's DA distance method. Expected heterozygosity between each population was estimated very analogously. Genetic distances (0.0413) between Kangwan (KW) and Gyonggi (GG), Jeonpuk (JP) were nearest than distances between other populations by 0.021. Genetic distances between Gyonggi (GG) and Kyongpuk (KP) showed far distance than other populations by 0.032. In the UPGMA tree that is made based on DA distance matrix. Each individuals were not ramified to different group and were spread evenly in phylogenetic dendrogram about all Hanwoo of each regional area populations. But Hanwoo proven population was ramified to different group.

• Korean Journal of Ichthyology
• /
• v.22 no.2
• /
• pp.115-120
• /
• 2010

Genetic variation and population structure of the slender bitterling Acheilognathus lanceolatus of Korea (the Han, Geum, Dongjin, Seomjin and Nakdong Rivers) and Japan (the Katsura River) were assessed by amplified fragment length polymorphism (AFLP) analysis. Five combinations of selective primers generated 345~374 DNA fragments, of which 55~131 were polymorphic. The Nakdong River population had the highest genetic diversity and the Han River population had the lowest genetic diversity. Dendrogram based on the distance matrix revealed that individuals from each population consistently clustered together and bifurcated into two distinct clades (or population groups) composed of the Han, Geum, Dongjin and Seomjin River populations and of the Nakdong and Katsura River populations, supported with high bootstrap values. The pairwise genetic differentiation ($F_{ST}$) estimates showed that the six populations were genetically well differentiated (P<0.01). The analysis of molecular variance (AMOVA) after partitioning the six populations into two population groups revealed very strong biogeographic structuring between them with 25.49% of total variance (P<0.01). Taken together, the AFLP markers clearly divided six A. lanceolatus populations into two population groups.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• Korean Journal of Plant Resources
• /
• v.20 no.1
• /
• pp.79-85
• /
• 2007

The species in genus Saxifiraga distributed in circumpolar arctic are taxonomically difficult to study. RAPD analyses were performed to compare the genetic diversity of the 16 Saxifrages originated from the Norwegian Arctic Svalbard and Korea. The 12 accessions of URP primers were tested and 4 of which showed polymorphism were selected. Total 79 (44.8%) DNA bands were scored and analyzed by UPGMA cluster analysis. The results indicated that all of the 9 Saxifraga species from Svalbard showed high genetic diversity than those from Korea. The Similarity matrix and cluster analyses indicated that the Saxifraga species from Svalbard and Korea can be divided into two different subgroups. RAPDs of the Saxifraga species of Korea showed higher homologous patterns than those of Arctic Saxifrage. Among the Saxifraga species, we found that the morphological similarity reflects the genetic similarity. The geographic distance, clonal reproduction, and environmental condition may contribute the high level of genetic diversity between Saxifraga species from the two isolated regions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.121-135
• /
• 2014

Object-based classification methods provide a valid alternative to traditional pixel-based methods. This study reports the results of an object-based classification to examine land cover in the demilitarized zones(DMZs) of Inje-gun. We used land cover classes(7 classes for main category and 13 classes for sub-category) selected from the criteria by Korea Ministry of Environment. The average and standard deviation of the spectrum values, and homogeneity of GLCM were chosen to map land cover types in an hierarchical approach using the nearest neighborhood method. We then identified the distributional characteristics of land cover by considering 3 topographic characteristics (altitude, slope gradient, distance from the Southern Limited Line(SLL)) within the DMZs. The results showed that scale 72, shape 0.2, color 0.8, compactness 0.5 and smoothness 0.5 were the optimum weight values while scale, shape and color were most influenced parameters in image segmentation. The forests (92%) were main land cover type in the DMZs; the grassland(5%), the urban area (2%) and the forests (broadleaf forest: 44%, mixed forest: 42%, coniferous forest: 6%) also occupied mostly in land cover classes for sub-category. The results also showed that facilities and roads had higher density within 2 km from the SLL, while paddy, field and bare land were distributed largely outside 6 km from the SLL. In addition, there was apparent distinction in land cover by topographic characteristics. The forest had higher density at above altitude 600m and above slope gradient $30^{\circ}$ while agriculture, bare land and grass land were distributed mainly at below altitude 600m and below slope gradient $30^{\circ}$.

• Applied Microscopy
• /
• v.24 no.1
• /
• pp.28-40
• /
• 1994

Xerostomia and xerophthalmia are delicate or serous side effects, occuring when the radiotherapy is administered to the head and neck cancer patient. It is known that the cause of the above side effect is radiosensitivity of serous cells. In this study, the ultrastructural features of the parotid glands of the X-irradiated rats were observed. Sprague-Dawley rats weighing 200-250g each were anesthetized with sodium thiopental, and placed on the Mitsubishi linear accelerator. Only the head and neck areas of animals were exposured at the distance of 80cm, within the area of $30X30cm$, in the depth of 1cm, with the speed of 200R/min. Total doses applied were 3,000R or 6,000R depending on the experimental groups. Animals were sacrificed on the 6th hour, 2nd day and 6th day after the irradiation. Parotid glands were fixed in the 2.5% glutaraldehyde-1.5% paraformaldehyde solution, and followed by refixation in the 1% osmium tetroxide solution. Dehydrated blocks were embedded in araldite mixture, and ultrathin sections were cut. Sections were contrasted with the solution of uranyl acetate and lead citrate, and observed with JEM 100 CX-II electron microscope. The results were as follows: 1. Normal parotid acinar cells are two types; the light and the dark acinar cells. The light acinar cell contains dense secretory granules, whereas dark acinar cells contains granules of medium density with some darker spots within them, or other cells contain granules of medium density with darker rims. 2. Six hours after the irradiation, many acinar cells were degenerated showing variable stages of cytolytic bodies, light bodies, or dense degenerations. Within the acinar cell, Golgi apparatus and granular endoplasmic reticula were most severely altered elements. Granules showed more contrasting densities and irregularities. 3. Two days after the irradiation, some cytolytic bodies, and focal lucent degeneration of cytoplasm, and fine granular alteration of cytoplasmic matrix were pronounced. But other elements including secretory granules are rather looked unlatered. 4. Six days after the irradiation, most severe alterations were seen. Many intracellular canaliculi (or secretion figures), quanta of cytoplasm containing secretion antecedants, severely irregular luminal border, and again contrasting density of secretory granules showing tigroid spots or dense rims were noted. And myoepithelial degenerations were observed not uncommonly. 5. Irregular densities of secretory granules were interpreted as abnormal components of protein or carbohydrate portion are synthesized or abnormally metabolized under severe X-irradiation. 6. Myoepithelial degeneration and related alteration of nerve endings, etc., were suggested as the other causes of xerostomia following X-irradiation. 7. It is requested that radiation doses should be arranged, considering in mind not only the sensitivity of acinar cells but also the myoepithelial and neural functions.