• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.354-361
• /
• 2022

Objective: To analyze the overall treatment effects in terms of the amount of uprighting with changes in the three-dimensional positions of the mandibular posterior teeth after applying the biocreative reverse curve (BRC) system. Methods: Thirty-four patients (mean age, 20.5 ± 8.56 years) were treated using the BRC system (mean period, 8.17 ± 2.19 months). Cone-beam computed tomography was performed before treatment and after treatment with the BRC system. The three-dimensional movement of each tooth was analyzed in the coordinate system at points on the crown and root apex. A paired t-test was used to analyze the treatment effects of the BRC system. Results: The application of the BRC system spanning from the first premolar to the second molar resulted not only in buccal and distal uprighting, but also in increased buccal and distal tipping of the teeth. The premolars and the first molar were extruded, and the second molar was intruded. Conclusions: When the BRC system is applied, simultaneous distal and buccal uprighting of the premolars and molars can be achieved bilaterally using a temporary skeletal anchorage device without unnecessary movement of the anterior teeth.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.123-136
• /
• 1993

The purpose of this report is to present the successful improvement of occlusal relationship and facial esthetics in class II division 1 malocclusion with severe labioversion of upper anterior teeth and severe overjet, and in class II malocclusion with infraversion of bilateral maxillary canines by MEAW mechanics, which enables us to get effective distal on mass movement of maxillary dentition, with upper second molar extraction. After treatment, there were natural contact points at canine and premolar regions, normal occlusal relation-ship and treatment results, satisfied the gnathologic concept, in this 2 cases. Compared with the routine treatment with premolar extraction, the treatment time and patients' discomfort were reduced. And the MEAW mechanics, which enables us to get effective distal on mass movement of maxillary dentition, resulted in reduction of the treatment time and getting the good treatment results. Consequently, the majot concerns in orthodontic treatment are appropriate diagnosis and treatment plan, so, the application of second molar extraction with appropriate case analysis and diagnosis is very helpful to orthodontic treatment.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.425-433
• /
• 1999

회전된 구치를 개선시키기 위해 사용하는 precision-TPA(transpalatal arch)를 삽입 방법들-근심삽입법, 원심삽입법, 확장력을 부여한 근심삽입법(이하 근심확장법) -에 따라 동적인 치아이동의 양상과 치열궁의 변화를 비교하기 위해 본교실에서 개발, 제작한 Calorific machine을 이용하여 실험한 후 회전된 치아와 고정치간의 이동양상을 계측하여 통계처리한 결과 다음과 같은 결론을 얻었다. 1. 구치간 폭경은 근심삽입법에 의해 감소하였고, 원심삽입법과 근심확장법에 의해서는 증가하였다. 2. 원심삽입법에 의해서 치열궁 장경이 가장 증가하였고, 근심확장법, 근심삽입법 순으로 증가하였다. 3. 근심삽입법의 회전중심은 근심소와(mesial pit)와 중심소와(central pit)사이에 위치하였고, 원심삽입법에서는 원심소와(distal pit)와 원심설측교두(distolingual cusp)사이에, 근심확장법은 원심소와(distal pit)에 위치하였다.

• 대한치과교정학회지
• /
• 제46권1호
• /
• pp.55-61
• /
• 2016

Skeletal anchorage-assisted upper molar distalization has become one of the standard treatment modalities for the correction of Class II malocclusion. The purpose of this study was to analyze maxillary molar movement patterns according to appliance design, with the simultaneous use of buccal fixed orthodontic appliances. The authors devised two distinct types of midpalatal miniscrew-assisted maxillary molar distalizers, a lingual arch type and a pendulum type. Fourteen patients treated with one of the two types of distalizers were enrolled in the study, and the patterns of tooth movement associated with each type were compared. Pre- and post-treatment lateral cephalograms were analyzed. The lingual arch type was associated with relatively bodily upper molar distalization, while the pendulum type was associated with distal tipping with intrusion of the upper molar. Clinicians should be aware of the expected tooth movement associated with each appliance design. Further well designed studies with larger sample sizes are required.

• 대한소아치과학회지
• /
• 제28권3호
• /
• pp.488-495
• /
• 2001

II급 치성교합을 가진 환자에서는 I급 구치부 교합관계를 형성하기 위하여 상악 대구치의 원심이동이 필요하다. 본 연구에서는 pendulum장치를 이용한 상악 대구치의 원심이동시 대구치의 이동양상과 고정원의 전방이동 및 정출정도 등 치아와 골격에 미치는 영향을 평가하기 위하여 시행되었다. 상악 제1대구치를 원심이동시켜 I급 구치관계가 형성된 19명의 환자(남: 8명, 여: 11명, 평균연령 $11.68{\pm}1.52$세)에서 장치 장착 전과 장치제거 직후에 얻어진 측면두부방사선사진을 비교 분석하여 다음과 같은 결과를 얻었다. 1. I급 교합관계를 형성하기 위해서 제1대구치는 평균 $2.94{\pm}1.54mm$ 원심이동하였으며, $1.17{\pm}0.97mm$ 함입되었고, 소요기간은 평균 $18.13{\pm}7.95$일이었다. 2. 고정원으로 사용된 치아는 $1.34{\pm}1.40mm$로 유의하게 전방 이동하였으며, $0.48{\pm}0.99mm$ 정출되었다. 또한 절치는 유의한 전방이동 및 순측경사가 발생하였다(P<0.05). 3. 구개평면과 하악평면이 이루는 각은 유의한 증가를 보였다(P<0.05) 4. 제 1소구치 또는 제 1유구치가 고정원으로 이용된 경우 제2소구치 또는 제2유구치가 이용된 경우 보다 전방이동이 증가하였다(P<0.005) 5. 제2대구치의 발육단계에 따른 제1대구치 및 제2대구치의 이동양상은 어떤 항목과도 유의성이 없었다(P<0.05). 6. 얻어진 총 공간 중 74%는 제1대구치의 원심이동이, 26%는 소구치의 전방이동에 의하여 얻어졌다. 이상의 결과를 종합하여 볼 때 pendulum appliance는 상악 대구치의 원심이동에 매우 효과적이었으며, 고정원의 소실을 최소화하기 위해 제2유구치 또는 제 2소구치가 포함되어야 한다. 또한 제1대구치의 원심경사는 필연적으로 일어나며, 이를 최소화하기 위한 노력이 계속되어야 할 것으로 사료된다.

• 대한치과교정학회지
• /
• 제45권5호
• /
• pp.236-244
• /
• 2015

Objective: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). Methods: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. Results: Mean maxillary 1st molar distalization was $2.3{\pm}1.1mm$, at a rate of $0.4{\pm}0.2mm/month$, and rotation was not significant. Intermolar width increased by $2.9{\pm}1.8mm$. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. Conclusions: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.290-300
• /
• 2016

Objective: This study aimed to (1) evaluate the effects of maxillary second and third molar eruption status on the distalization of first molars with a modified palatal anchorage plate (MPAP), and (2) compare the results to the outcomes of the use of a pendulum and that of a headgear using three-dimensional finite element analysis. Methods: Three eruption stages were established: an erupting second molar at the cervical one-third of the first molar root (Stage 1), a fully erupted second molar (Stage 2), and an erupting third molar at the cervical one-third of the second molar root (Stage 3). Retraction forces were applied via three anchorage appliance models: an MPAP with bracket and archwire, a bone-anchored pendulum appliance, and cervical-pull headgear. Results: An MPAP showed greater root movement of the first molar than crown movement, and this was more noticeable in Stages 2 and 3. With the other devices, the first molar showed distal tipping. Transversely, the first molar had mesial-out rotation with headgear and mesial-in rotation with the other devices. Vertically, the first molar was intruded with an MPAP, and extruded with the other appliances. Conclusions: The second molar eruption stage had an effect on molar distalization, but the third molar follicle had no effect. The application of an MPAP may be an effective treatment option for maxillary molar distalization.

• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.171-179
• /
• 2015

Objective: To compare dentoalveolar and skeletal changes produced by the pendulum appliance (PA) and the distal screw appliance (DS) in Class II patients. Methods: Forty-three patients (19 men, 24 women) with Class II malocclusion were retrospectively selected for the study. Twenty-four patients (mean age, $12.2{\pm}1.5years$) were treated with the PA, and 19 patients (mean age, $11.3{\pm}1.9years$) were treated with the DS. The mean distalization time was 7 months for the PA group and 9 months for the DS group. Lateral cephalograms were obtained at T1, before treatment, and at T2, the end of distalization. A Mann-Whitney U test was used for statistical comparisons of the two groups between T1 and T2. Results: PA and DS were equally effective in distalizing maxillary molars (4.7 mm and 4.2 mm, respectively) between T1 and T2; however, the maxillary first molars showed less distal tipping in the DS group than in the PA group ($3.2^{\circ}$ vs. $9.0^{\circ}$, respectively). Moreover, significant premolar anchorage loss (2.7 mm) and incisor proclination ($5.0^{\circ}$) were noted in the PA group, whereas premolar distal movement (1.9 mm) and no significant changes at the incisor ($0.1^{\circ}$) were observed in the DS group. No significant sagittal or vertical skeletal changes were detected between the two groups during the distalization phase. Conclusions: PA and DS seem to be equally effective in distalizing maxillary molars; however, greater distal molar tipping and premolar anchorage loss can be expected using PA.

• 대한치과교정학회지
• /
• 제28권2호
• /
• pp.269-276
• /
• 1998

마찰견인법으로 상악견치를 후방견인할 때, 저항원상실을 최소로 하며 조절되지못한 경사이동을 예방하기 위한 장치인 MAS(molar anchoring spring)를 고안하여 임상에 적용하였다. 31명(여자 29명, 남자 2명)의 표본에서 MAS를 사용하여 상악견치의 후방견인을 시행하였고, 견인 전후의 측모 두부 방사선 규격사진, orthopantomogram과 치아모형을 채득하였다. 얻어진 정보로부터 상악 제1대구치의 저항원소실 및 상악 견치의 경사이동경향을 조사하여 다음과 같은 결과를 얻었다. 1. 상악 제1대구치의 경우 수직정출과 jntermolar width의 변화가 없었으며, 시상면에서 적은 양의 저항원소실만이 있었다. 2. 상악 견치의 경우 원심경사 및 약간의 압하가 일어났으며 교합이 깊어졌다는 소견은 보이지 않았다.