• Journal of People, Plants, and Environment
• /
• v.24 no.6
• /
• pp.609-617
• /
• 2021

Background and objective: The nanobubbles remain stable in water, and it increased dissolved oxygen (DO) in the water that promotes the seed germination and the plant growth. We evaluated the seed germination and growth of sprouts (radish, wheat, and barley) and leafy vegetables (red mustard and pak choi) when irrigated with various DO of nanobubble water (NB). Methods: The oxygen NB was generated by surface friction and treated in 4 levels: NB 0% (control, DO 9.21 mg·L^-1), NB 20% (DO 15.40 mg·L^-1), NB 33% (DO 20.93 mg·L^-1), and NB 100% (DO 39.29 mg·L^-1). Results: The root length of radish and wheat increased more in NB 33% than the control plot. The fresh weight increased in NB 33% compared to the control plot in radish and wheat, and both fresh and dry weight increased more in NB 20%, NB 33%, and NB 100% than the control plot of barley. The leaf length and width of red mustard decreased more in NB 33% and NB 100% than the control plot and NB 20%, which indicated the leaf compactness. The fresh and dry weight of shoot and root increased more in NB 100% than the control plot in red mustard. In pak choi, the shoot fresh weight increased more in NB 100% than the control plot. In leafy vegetables, the germination rate of red mustard in NB 100% was higher than the control plot, however, it was not significantly different between oxygen NB plots in sprout vegetables. Conclusion: The results showed that the root growth and biomass increased after applying NB 33% in sprout vegetables. The leaf growth properties as the number of leaves and leaf size were not significantly different or decreased in NB treatments compared to control plots, but NB 100% (DO 39.29 mg·L^-1) effectively increased the root growth and plant biomass in leafy vegetables.

• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.534-539
• /
• 2009

One of the most efficient techniques improving the heat transfer performance of a diesel electric generation is a corrosion control in jacket cooling water system. The environmental parameters most affecting corrosion are dissolved salt concentration, temperature, and pH of cooling water. No corrosion occurs in carbon steel probe at pH 11 in normal operating condition of diesel electric generation cooling water. pH control agent in this study is trisodium phosphate. pH control appears to be the most convenient way to enhance the thermal performance of a diesel electric generation.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.582-590
• /
• 2019

Currently, the waterfront facility was constructed in New Songdo City, South Korea. It has the various water leisure areas and especially an artificial urban canal with filtered seawater by re-circulating flow system. However, due to excessive amount of nutrients from seawater combined with complicated geometry, it is highly vulnerable to deterioration of water quality. In this study, flow characteristics and pollutant transport were analyzed with comprehensive numerical models, MIKE 3 FM and ECO-lab. Based on these numerical results, notable sampling points were selected for field measurements and comparison between modeling and measured results were conducted. In addition, the integrated water quality evaluation index, Water Quality Index was applied to analyze various water quality issues. We also set up scenarios to control the two kinds of water quality factors, dissolved oxygen (DO), and total phosphorus (TP). As a result, the effect of 20% reduction of TP was less than 10% and it was almost ineffective for a year but it was reduced by up to 40% in case of scenario which DO is increased by 20%. Therefore, it was recommended to control the DO concentration, usually by applying re-aeration facility, rather than TP in artificial urban canal with seawater.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.71-80
• /
• 1995

A discrete state space model for a multiple-reach river system is formulated using the dynamics of biochemical oxygen demand(BOD) and dissolved oxygen(DO). A hierarchical optimization technique, which is applicable to large-scale systems with time-delays in states, is also described to control stream quality in a river as an optimal manner based on the interaction prediction method. The steady state tracking error of the proposed method is determined analytically and a necessary and sufficient condition on which a constant target tracking problem has zero steady-state error is derived. Computer simulations for the river pollution model illustrate the algorithm.

• Journal of Bio-Environment Control
• /
• v.2 no.2
• /
• pp.147-149
• /
• 1993

양액재배에 있어서 배양액 중에 있는 질소, 칼륨, 인, 칼슘, 마그네슘 등 식물 영양성분의 함유량을 항상 알맞게 유지시키는 일은 매우 중요하다. 아울러, 양액의 산도(pH)와 용존산소량(dissolved oxygen;DO)도 식물 생장에 큰 영향을 미치기 때문에 적절히 유지하지 않으면 안된다. 양액의 상태를 항상 작물 생육에 알맞게 유시키기 위해서는 먼저 양액의 조성과 관계가 있는 물리량을 정확히 측정할 필요가 있다. 특히 양액관리를 자동화하기 위해서는 정확도와 함께 신속하고도 간편한 측정방법이 필요하다. 양액 상태에 관한 주요 측정항목에는 전기전도도(electric conductivity : EC), 산도(pH), 용존산소량(DO)이 있다.

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.124-129
• /
• 2016

Recently industry has voiced a need for optimally designing the production process of low-cost, high-quality ingots by improving productivity and reducing production costs with the Czochralski process. Crystalline defect control is important for the production of high-quality ingots. Also oxygen is one of the most important impurities that influence crystalline defects in single crystals. Oxygen is dissolved into the silicon melt from the silica crucible and incorporated into the crystalline a far larger amount than other additives or impurities. Then it is eluted during the cooling process, there by causing various defect. Excessive quantities of oxygen degrade the quality of silicone. However an appropriate amount of oxygen can be beneficial. because it eliminates metallic impurities within the silicone. Therefore, when growing crystals, an attempt should be made not to eliminate oxygen, but to uniformly maintain its concentration. Thus, the control of oxygen concentration is essential for crystalline growth. At present, the control of oxygen concentration is actively being studied based on the interdependence of various factors such as crystal rotation, crucible rotation, argon flow, pressure, magnet position and magnetic strength. However for methods using a magnetic field, the initial investment and operating costs of the equipment affect the wafer pricing. Hence in this study simulations were performed with the purpose of producing low-cost, high-quality ingots through the development of a process to optimize oxygen concentration without the use of magnets and through the following. a process appropriate to the defect-free range was determined by regulating the pulling rate of the crystals.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1690-1698
• /
• 2006

In order to investigate the effect of dissolved oxygen (DO) level on AVM $B_{1a}$ production by a high yielding mutant of Streptomyces avermitilis, five sets of bioreactor cultures were performed under variously controlled DO levels. Using an online computer control system, the agitation speed and aeration rate were automatically controlled in an adaptive manner, responding timely to the oxygen requirement of the producer microorganism. In the two cultures of DO limitation, the onset of AVM $B_{1a}$ biosynthesis was observed to casually coincide with the fermentation time when oxygen-limited conditions were overcome by the producing microorganism. In contrast, this phenomenon did not occur in the parallel fermentations with DO levels controlled at around 30% and 40% throughout the entire fermentation period, showing an almost growth-associated mode of AVM $B_{1a}$ production: AVM $B_{1a}$ biosynthesis under the environments of high DO levels started much earlier than the corresponding oxygen-limited cultures, leading to a significant enhancement of AVM $B_{1a}$ production during the exponential stage. Consequently, approximately 6-fold and 9-fold increases in the final AVM $B_{1a}$ production were obtained in 30% and 40% DO-controlled fermentations, respectively, especially when compared with the culture of severe DO limitation (the culture with 0% DO level during the exponential phase). The production yield ($Y_{p/x}$), volumetric production rate (Qp), and specific production rate (${\bar{q}}_p$) of the 40% DO-controlled culture were observed to be 14%, 15%, and 15% higher, respectively, than those of the parallel cultures that were performed under an excessive agitation speed (350 rpm) and aeration rate (1 vvm) to maintain sufficiently high DO levels throughout the entire fermentation period. These results suggest that high shear damage of the high-yielding strain due to an excessive agitation speed is the primary reason for the reduction of the AVM $B_{1a}$ biosynthetic capability of the producer. As for the cell growth, exponential growth patterns during the initial 3 days were observed in the fermentations of sufficient DO levels, whereas almost linear patterns of cell growth were observed in the other two cultures of DO limitation during the identical period, resulting in apparently lower amounts of DCW. These results led us to conclude that maintenance of optimum DO levels, but not too high to cause potential shear damage on the producer, was crucial not only for the cell growth, but also for the enhanced production of AVM $B_{1a}$ by the filamentous mycelial cells of Streptomyces avermitilis.

• Journal of Ecology and Environment
• /
• v.41 no.9
• /
• pp.235-245
• /
• 2017

Background: Loading of excess nutrient via bioremediation of polluted sediment to overlying water could trigger anoxia and eutrophication in coastal area. The aim of this research was to understand the changes of overlying water features such as dissolved oxygen (DO); pH; oxidation reduction potential (ORP); $chlorophyll-{\alpha}$ ($Chl-{\alpha}$); and nitrogen nutrients ammonia ($N-NH_4{^+}$), nitrate ($N-NO_3{^-}$), and nitrite ($N-NO_2^-$) when the sediment was not treated (control) and treated by calcium peroxide for 5 weeks. Methods: The water samples were analyzed for measuring physical and chemical properties along with the sediment analyzed by polymerase chain reaction (PCR) including denaturing gradient gel electrophoresis (DGGE) for identifying the phylogenetic affiliation of microbial communities. Results: Results showed that due to the addition of calcium peroxide in sediment, the overlying water exposed the rise of dissolve oxygen, pH, and ORP than control. Among the nitrogen nutrients, ammonia inhibition was higher in calcium peroxide treatment than control but in case of nitrate inhibition, it was reversed than control. $Chlorophyll-{\alpha}$ was declined in treatment column water by 30% where it was 20% in control column water. Actibacter and Salegentibacter group were detectable in the calcium-peroxide-treated sediment; in contrary, no detectable community ware found in control sediment. Both phylogenetic groups are closely related to marine microflora. Conclusions: This study emphasizes the importance of calcium peroxide as an oxygen release material. Interaction with peroxide proved to be enhancing the formation of microbial community that are beneficial for biodegradation and spontaneity of nutrient attenuation into overlying water.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.112-118
• /
• 2009

To determine the effects of circulation frequency of nutrient solution, three frequencies of 10min. on/10min. off; 10min. on/110min. off; and 10min. on/1,430min. off. treatments were applied to leafy vegetable production using deep flow technique (DFT) systems and their growth and phytonutrient content were investigated. In the 10min. on/I,430min. off treatment, dissolved oxygen concentration (DOC) 17 days after treatment decreased to 2.8mg. $L^{-1}$, known to be a low DOC that causes hypoxia, and thereafter decreased to 1.5mg. $L^{-1}$ 20 days after treatment. Fresh weight of 7 leafy vegetables in the 10min. on/1,430min. off treatment was lower by 0${\sim}$24% than those in the 10min. on/110min. off treatment, and those in the 10min. on/10min. off was higher by -2${\sim}$34% than those in the 10min. on/110min. off treatment as control. As the more frequent circulation was applied, the higher phosphorous content and the lower carbon to nitrogen ratio (C/N ratio) and total ascorbic acid contents were resulted. Results indicate that the circulation frequency of 110min, on/110min. off could be recommended for the production of the tested leafy vegetables in DFT systems.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.105-111
• /
• 2011

The purpose of this study was to find out the effect of a torrent control structure using customized tetrapods on the forest water quality conservation and management. The study was conducted in the Honggye valley located in Sanchung-gun, Gyungsangnam-do, and stream water quality was compared before and after construction of torrent control structure. After construction of the torrent control structure using customized tetrapods, pH of stream water didn't get out of the range of River water quality standard class I. After construction of the torrent control structure using customized tetrapods, Dissolved Oxygen concentration didn't change, and Electrical Conductivity measurements agreed well within the range of normal clean stream water quality. After construction of the torrent control structure using customized tetrapods, average of total amount of anion was 3.07/2.30~3.60 mg/L, being slightly greater than before construction. Stream water quality after construction of the torrent control structure was similar to before construction. Therefore, it was find out that the torrent control structure didn't affect stream water quality.