• 센서학회지
• /
• 제6권3호
• /
• pp.221-227
• /
• 1997

Pd/NiCr 게이트 MISFET 센서는 변압기 절연유중 용존수소를 감지하기 위해 제조되었다. 센서의 안정성과 고농도 감지성의 향상을 위해 Pd/NiCr 2중 촉매 금속 게이트가 사용되었다. 수소유입에 의한 게이트 전압의 드리프트를 줄이기 위해, 2개의 FET 게이트 절연층을 실리콘 산화막과 실리콘 질화막의 2중 구조로 하였다. Pd/NiCr 게이트 MISFET 센서의 수소 감응 감도는 Pd/Pt 게이트 MISFET 센서의 감도에 비해 약 0.5배이나, 안정성이 좋고, 1000 ppm까지의 고농도까지 측정할 수 있었다.

• 센서학회지
• /
• 제10권4호
• /
• pp.259-265
• /
• 2001

FET형 용존산소 센서는 pH-ISFET를 기본 소자로하여 pH 감지 게이트 근처에 백금으로 된 작업 전극을 형성한 구조를 가지고 있다. 작업전극에 특정한 전위를 인가하면 전기분해로 인하여 용존산소의 농도에 비례하는 수소 이온이 pH 감지 게이트 주변에 발생된다. 따라서 pH-ISFET를 통하여 수소 이온 농도의 변화량을 검출하면 용존산소의 농도를 측정할 수 있게된다. 본 논문에서는 이러한 FET형 용존산소 센서를 어레이 형태로 제작하여 적용하고 측정의 신뢰성을 높이기 위한 알고리즘을 도입한 FET형 용존산소 센서 어레이 측정 시스템을 개발하였다. 또한 상용 용존산소 측정기와 그 성능을 비교 분석하였다.

• 센서학회지
• /
• 제32권2호
• /
• pp.67-74
• /
• 2023

A microfluidic paper-based analytical device (µPAD) is proposed for the selective detection of ammonia in water by using the modified Berthelot reagent and a fluidic channel consisting of hollow paper. The modified Berthelot reagents were uniformly dispersed in cyclohexane and then immobilized in a detection zone of the µPAD. The loading position of the reagents and the type of a sample flow channel were optimized to achieve a sensitive ammonia detection within a short analytical time. The NH₃ µPAD exhibits a linear colorimetric response to the concentration of ammonia dissolved in water in the range of 1-100 mg L^-1, and its limit-of-detection is 1.75 mg L^-1. In addition, the colorimetric response was not influenced by the addition of 100 mg L^-1 nitrogen containing compounds (sodium nitrate, sodium nitrite, uric acid, hydroxylamine, butylamine, diethylamine) or inorganic salts (NaCl, Na₂HPO₄), presenting the enough selectivity in the detection of water-dissolved ammonia against possible interferents.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.340-347
• /
• 2008

Dissolution process of serpentine in distilled water was systematically investigated for study on pre-treatment of serpentine which was a candidate material for carbon dioxide sequestration. The metallic ions(Ca, Si, Mg etc.) were dissolved in distilled water at ambient condition and their concentrations were changed with dissolution time. The precise evaluation of dissolution process for serpentine dissolved solvent was performed by ion conductivity and pH measurement. Serpentine dissolution in distilled water was evaluated as a stable pre-treatment process without changes of crystallographic structure and chemical structure changes.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.534-539
• /
• 2009

One of the most efficient techniques improving the heat transfer performance of a diesel electric generation is a corrosion control in jacket cooling water system. The environmental parameters most affecting corrosion are dissolved salt concentration, temperature, and pH of cooling water. No corrosion occurs in carbon steel probe at pH 11 in normal operating condition of diesel electric generation cooling water. pH control agent in this study is trisodium phosphate. pH control appears to be the most convenient way to enhance the thermal performance of a diesel electric generation.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.238-243
• /
• 2015

The vegetable insulating oils are substitute for the mineral oil in power transformer. Vegetable insulating oils has higher flash/fire point and biodegradability than conventional mineral oils. In this paper, we investigated the dissolved gas analysis of vegetable oils. In the experiment, I had to accelerated aging under the same conditions mineral oil and vegetable oils. Accelerated aging proceeded to about 100% of the life of oil-filled transformer. In addition, we performed gas analysis of insulating oil of accelerated aging progress. The experiment results of the five gases was measured with the exception of Hydrogen and Acetylene. The mineral oil and vegetable oils gas is generated in a similar tendency depending on the accelerated aging. As a result, vegetable oils, can be dissolved gas analysis by method such as mineral oil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1162-1165
• /
• 2004

In oil-filled enuipment such as transformers, partial discharge or local overheating will precede a final shutdown. Accompanied with such problems is a decomposition of insulating material into gases, which are dissolved into the transformer oil. The gases dissolved in oil can be separated with some membranes based on the differences in permeability of membranes to different gases. This paper discuss the permeability characteristics of several membranes for separation hydrogen gas in oil. With result of this paper, it may become possible to detect fault-related gases from transformer oil and predict incipient failures in the future.

• 한국수소및신에너지학회논문집
• /
• 제7권1호
• /
• pp.111-115
• /
• 1996

Metal atom rearrangement has been shown to take place under the influence of hydrogen-induced atomic diffusion (HIAD) in initially homogeneous fee palladiumalloys by electron microprobe analysis, optical microscopy, mechanical property tests and hydrogen isotherms. HIAD takes place in palladium alloys at moderate to elevated temperatures leading to phase segregation under conditions where segregation does not normally occur, i.e., in the absence of H over the time scale of the experiments. From these results, it is confirmed that dissolved hydrogen plays a dual role in some of these alloys, i.e. it catalyzes metal atom diffusion. This research demonstrates the potential utility of employing H-induced changes for phase diagram determination of Pd alloys and possibly for other alloy system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.314-314
• /
• 2002

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.416-424
• /
• 2018

Microstructure of oxide formed on Zr-Nb-Sn tube sample was intensively examined by scanning transmission electron microscopy after exposure to simulated primary water chemistry conditions of various concentrations of Zn (0 or 30 ppb) and dissolved hydrogen ($H_2$) (30 or 50 cc/kg) for various durations without applying desirable heat flux. Microstructural analysis indicated that there was no noticeable change in the microstructure of the oxide corresponding to water chemistry changes within the test duration of 100 days (pretransition stage) and no significant difference in the overall thickness of the oxide layer. Equiaxed grains with nano-size pores along the grain boundaries and microcracks were dominant near the water/oxide interface, regardless of water chemistry conditions. As the metal/oxide interface was approached, the number of pores tended to decrease. However, there was no significant effect of $H_2$ concentration between 30 cc/kg and 50 cc/kg on the corrosion of the oxide after free immersion in water at $360^{\circ}C$. The adsorption of Zn on the cladding surface was observed by X-ray photoelectron spectroscopy and detected as ZnO on the outer oxide surface. From the perspective of $OH^-$ ion diffusion and porosity formation, the absence of noticeable effects was discussed further.