• Korean Journal of Environment and Ecology
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2005

The objective of this study was to monitor the edge vegetation development process after timber harvesting at deciduous hardwood forest in Seoul National University Forests of Baekwoonsan(Mt), Korea. From 1994 to 1999, Woody plants were monitored on two experimental plots established in 1994. The edge vegetation development pattern during the last six years(1994-1999) after timber harvesting is summarized as follows; Weigela subsessilis, Lindera erythrocarpa, Stephanandra incisa, Zanthoxylum schinifolium appeared to be a competitive species at the harvested forest edge. Staphylea bumalda, Lindera erythrocarpa, Viburnum erosum appeared to be a competitive species at harvested forest border between the harvested forest edge and the harvested interior. Weigela subsessilis, finders erythrocarpa, Lindera obtusiloba appeared to be a competitive species at the forest interior. The mean relative important value of major species were changed along the distance from the forest edge to the forest interior and seemed to be affected by aspect, and existing woody plants. But similarity indices seemed to be affected by distance. Species composition of forest edge(0-10m) was dissimilar to that of the other forest edge(40-50m). Species diversity indices, number of species and individuals were decreased according to the distance from the forest edge to the forest interior with passing time.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.112-121
• /
• 1988

A study on friction welding of carbon steel bar (SM45C) to chrome molybedenum steel bar(SCM4) is examined experimentally through tensile test, hardness test, microstructure test and fatigue test. so, this paper deals with optimizing the welding concitions and analyzing various mechanical properties about friction welds of SM45C to SCM4 steel bars. The results obtained are summarized as follows; 1) For friction welded joints of SM45C to SCM4 steel bars, the total upset(U)increases linearly with an increase of heating time ($t_{1}$) till 6s. 2) The determined optimum welding conditions are heating time ($t_{1}$)2s, upsetting time($t_{2}$), 3s, heating pressure($p_{1}$), 4kgf/$mm^{2}$(39.2MPa), upsetting pressure($p_{2}$, 8kgf/mm$^{2}$(78.4MPa) and rotating speed(N), 2, 000rpm when the total upset(U) is 3.4mm, resulting in a computed relationship between the joint tensile strength .sigma.$_{t}$ (kgf/mm$^{2}$and the total upset U(mm); .sigma.$_{t}$ =$0.21U^{3}$ - $3.38U^{2}$ +17.03U + 66.00 3) As the elongation is increased more and more, the fracture position becomes away from weld interface and the fractures are similar to those of SM45C. Fracture is taken place on SM45C side. 4) The weld interface of two dissimilar materials is mixed strongly, and the heat affected zone is about 2.0mm at SM45C while about 2.7 mm at SCM4 side. Therefore, the welded zone and heat affected zone are very narrow, comparing with those of the joints welded by the other welding methods. 5) The fatigue strengths at N=10$^{6}$ cycles of SM45C, SCM4 and friction welded joints are 23kgf/$mm^{2}$, 33kgf/$mm^{2}$(220.5 MPa), and 22.5kgf/$mm^{2}$(220.5MPa) respectively, and fracture at friction welded joint takes place at the side of SM45C. 6) The hardness of the friction weld interface is 3 times higher than that of base metal. 7) Fatigue strength of friction welded joint is higher than that of base metal. 8) Notch sensitivity factor of friction welded joint is lower than that of base metal.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.719-727
• /
• 2013

Four-step travel-demand modeling based on a trip-level has been widely used over many decades. However, there has been a wide variance between forecasted- and real-travel demands, which leads less reliable on the model implications. A primary reason is that person's real travel behavior is not properly captured throughout the model developments. An activity-based modeling (ABM) approach was proposed and developed toward increasing the accuracy and reality of person's travel behavior in the U.S. since 1990', and stands as a good alternative to replace the existing trip-based approach. The paper contributes to the understanding of how the ABM approaches are dissimilar to the trip-based modeling approach in terms of estimation units, estimation process, their pros and cons and etc. We examined three activity-based travel demand model systems (DaySim, CT-Ramp, and CEMDAP) that are most commonly applied by many MPOs (Metropolitan Planning Organization). We found that the ABM approach can effectively explain multi-dimensional travel decision-makings and be expected to increase the predictive accuracy. Overall, the ABM approach can be a good substitute for the existing travel-demand methods having unreliable forecasts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.786-790
• /
• 2016

This paper discusses numerically explored orientation effects on the thermal performance of hollow hybrid fin heat sinks (HHFHSs) under natural convection. A HHFHS consists of an array of hollow pin fins concatenated with plate fins and having perforations near the fin bases. Orientation effects on the footprint-based and mass-based thermal performance of the HHFHS were numerically studied for orientation angles ranging from $0^{\circ}$ to $180^{\circ}$. The performance of the HHFHS was compared with that of a pin fin heat sink (PFHS) having similar physical parameters. The results show that the thermal resistance of the HHFHS did not vary considerably from $0^{\circ}$ to $45^{\circ}$. The thermal resistance increased from $45^{\circ}$ to $90^{\circ}$, reached its maximum at $90^{\circ}$, and decreased consistently from $90^{\circ}$ to $180^{\circ}$. Dissimilar behaviors of the thermal resistance of the HHFHS vs. the PFHS resulted mainly from the effect of heat pumping induced by the internal flows of the hollow fins. Despite various orientations, the mass-based thermal resistance of the HHFHS was found to be nearly 30% smaller than that of the PFHS. This result shows the feasibility of the HHFHS for the lightweight thermal management of electronics under natural convection.

• Sijohaknonchong
• /
• v.42
• /
• pp.117-150
• /
• 2015

English sijo is the sijo poems written in English. This paper considered English sijo especially in association with its wit. In English-speaking countries, wit has been often emphasized as one of the main characteristics of the sijo genre, and it is often found in many English sijo poems. As a critical term, wit indicates a kind of "concord of discord", which consists of dissimilar images, paradox, irony, etc. This paper investigated how English sijo embodied this kind of critical wit and created three kinds of delight; those are intelligent, sarcastic, and humorous one. First, I examined old Korean sijo poems and the wit embedded in them, and then I compared them to the case of English sijo. Sijo was received in English-speaking countries in the context of the literary genre tradition such as the epigram and the sonnet, and of the literary concepts such as irony and wit. In this context, sijo, which has a three-divided semantic structure and a twist in the last part, often containing irony and wit, could be received and composed without much difficulty in Englih-speaking countries. Many English sijo poems contain wit, and they make abundant delight, which is intelligent, sarcastic, or humorous. Wit is found in Korean old sijo too, but the wit that catches humorous moments variously in everyday lives, rather than show acid sarcasm or exaggerated comic scene, is a remarkable characteristic of the English sijo. English sijo presents the possibility of the sijo genre as the poetry of everyday life, which presents various aspects of daily lives in a warm and delightful perspective.

• The Korean Journal of Zoology
• /
• v.39 no.4
• /
• pp.437-446
• /
• 1996

The courtship and fighting behaviors and the sexual dimorphism of the salamander Hynohius leechil were studied. The parameters, snout vent length, body length (from snout to tail tip), and proportion of snout vent length to body size were larger in the female than the male. Five physical parameter in males were significantly correlated with one another, body length, snout vent length, head width, tail vent length, and tall depth, while all, except tail depth, were significantly correlated in females. Sexual behavior of H. leechIl involved external fertilization and consisted of three stages, identifying the female, aifrading the female, and insemination. The identification stage consisted of a positive advance by the male toward the female and display of snout contact. The male attracted the female with chin rubbing, tail undulation, smelling, and digging displays. The insemination process consisted of four phases, amplex, separating egg sacs from the female's cloacal, fertilizing eggs, and post fertilization. liighting behaviors were quite simple. The attacking male would generally bite the opposite male's upper chin or hind limbs and then shakes his head two or three times. The bitten male, which in most cases was of a dissimilar body size, quicidy escaped from the attacking male. After fighting, winning male usually displayed rapid tail undulation.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.113-130
• /
• 2011

The laver has been cultivated long time ago by Korea and Japan. Korean Laver Industry has been influenced by Japan on the many factors since 20th. Nevertheless now the both country showed widening disparities across the aspect of total Laver Industry each other. The development steps of Korea and Japan Laver Industry have been advanced differently. That is, we can keep the Laver Industry development steps of both countries separate by 4 steps. But insignificant of every step against both countries has been dissimilar. We can separate from 4 steps in Korea, 1 step is origin period from beginning of laver cultivation to 1961. Next step is First Development period from 1962 to 1978. This period come out production increase from about 10,000 tons early 1960 to 50,000 tons late 1970. Next step is Second Development period from 1979 to 2000. This period come out eminent production increase from about 50,000 tons early 1980 to 200,000 tons late 1990. Next step is Stabilization period from 2001 to now. This period come out production control the size of its production and enlargement of Laver Export. We can also separate from 4 steps in Japan, 1 step is origin period from beginning of laver cultivation to 1944. Next step is Development period from 1945 to 1975. This period come out production increase from about 4 billion sheets early 1960 to 8.5 billion sheets 1975. Next step is Peak period from 1976 to 1982. This period come out sustainable production peak by 6~8 billion sheets and high price. Next step is Decline period from 1983 to now. This period come out production control the size of its production and sustainable price down. These differences showed out facing problems of Korean and Japanese Laver Industry differently. In case of Korea, the facing problems show out 3. First is structural problem, for example, trouble between original laver producer and the finished producer by dry laver products. Second is Insufficiency of Plants Protection System. Third is low quality of Laver. In case of Japan, the facing problems also show out 3. First is sustainable decrease of laver consumption. Second is change of mind against laver, for example, the change of the propensity to consume, and decrease of brand power. Third is Influence of global system. The difference of development steps of Korea and Japan Laver Industry show out 2 point of view to us. First we need consider positive strategy against laver production system of enlargement. Second, we need consider separate strategy against high quality laver and low quality laver.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.93-100
• /
• 2016

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces were investigated: Kerator (pink, blue, red) and O-ring (orange, red). Two implant fixtures were vertically embedded in base mountings. Five pairs of each attachment were evaluated. A universal testing machine was used to evaluate the retentive force of two attachments during wear simulation. Surface characteristics of each attachment system were evaluated with scanning electron microscopy. Five pairs of each attachment were evaluated. Kerator pink showed the highest initial retention. After 2,500 cycles of wear-simulation, Kerator pink noted the largest decrease in retention. According to results of surface analysis, Worn surfaces were obtained in matrices and patrices. Heavy wears were observed in matrices. After 2 year-wear simulation, most attachments exhibited retention loss. Attachments using different kind of material exhibited dissimilar surface alterations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1844-1866
• /
• 2011

In a home network system, each customer electronic device has the control data format chosen by its manufacturing company and there are various types of digital devices and protocols. Besides the mutual operating environments among the various devices are dissimilar. Affected by the characteristics explained above, home network systems can hardly support the crucial functions, such as data compatibility, concurrency control, and dynamic plug-in. Thus, the home network system shows relatively poor reusability. In this paper, we suggest design technique of configurable framework, which can widely support the variability, to increase the reusability of the home network system. We extract the different parts of the home network system as variation points, and define them as the variability types. We design a structure of configurable framework, and suggest customization technique of configurable framework through selection technique and plug-in technique. Also, we prove the reusability by applying the proposed framework and it methods to real-world home network systems and analyzing the measurement results of these case studies using software metrics. We can expect the proposed approach provides better reusability than the existing them by analyzing those measurement results.

• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.547-551
• /
• 2008

Crack-free joining of $Si_3N_4\;and\;Al_2O_3$ using 15 layers has been achieved by a unique approach introducing Sialon polytypoids as a functionally graded materials (FGMs) bonding layer. In the past, hot press sintering of multilayered FGMs with 20 layers of thickness $500{\mu}m$ each has been fabricated successfully. In this study, the number of layers for FGM was reduced to 15 layers from 20 layers for optimization. For fabrication, model was hot pressed at 38 MPa while heating up to $1700^{\circ}$, and it was cooled at $2^{\circ}$/min to minimize residual stress during sintering. Initially, FGM with 15 layers had cracks near 90 wt.% 12H / 10 wt.% $Al_2O_3$ and 90 wt.% 12H/10 wt.% $Si_3N_4$ layers. To solve this problem, FEM (finite element method) program based on the maximum tensile stress theory was applied to design optimized FGM layers of crack free joint. The sample is 3-dimensional cylindrical shape where this has been transformed to 2-dimensional axisymmetric mode. Based on the simulation, crack-free FGM sample was obtained by designing axial, hoop and radial stresses less than tensile strength values across all the layers of FGM. Therefore, we were able to predict and prevent the damage by calculating its thermal stress using its elastic modulus and coefficient of thermal expansion. Such analyses are especially useful for FGM samples where the residual stresses are very difficult to measure experimentally.